Double perovskite Bi2FeMo Ni1-O6 thin films: Novel ferroelectric photovoltaic materials with narrow bandgap and enhanced photovoltaic performance
Source abstract
Abstract
Abstract Double perovskite ferroelectric Bi2FeMoxNi1-xO6 (BFMNO) thin films were fabricated using the sol-gel method. The thin films have a broad-band absorption in visible light range of 400–650 nm. With the increase of Mo content, the optical bandgap decreases from 2.19 eV to 2.07 eV. More importantly, the as-prepared BFMNO thin films have self-polarization behavior that causes the forming of the depolarization field and build-in field in the thin films. The narrow band gap and strong ferroelectric self-polarization play a crucial part in improving the photovoltaic effect. The thin film of x = 0.7 has the optimum open circuit voltage and short circuit current which are 5.41 V and 71.07 μA/cm2 under light illumination of 110 mW/cm2. In addition, the photovoltaic effect of the thin film also exhibits a good adaptability in high temperature environment. This work highlights the applications of the BFMNO thin films as a novel high-performance ferroelectric photovoltaic material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Multiferroics and related materials · Ferroelectric and Piezoelectric Materials · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Bulk photovoltaic effect at visible wavelength in epitaxial ferroelectric BiFeO3 thin films10.1002/adma.200902985 ↗
2. Ferroelectric Bi3.25La0.75Ti3O12 photodiode for solar cell applications10.1016/j.solmat.2014.10.038 ↗
3. Influence of structural evolution on energy storage properties in Bi0.5Na0.5TiO3-SrTiO3-NaNbO3 lead-free ferroelectric ceramics10.1063/1.4975409 ↗
4. CoNi2S4 nanosheet arrays supported on nickel foams with ultrahigh capacitance for aqueous asymmetric supercapacitor applications10.1021/am5053784 ↗
5. Optimization of energy storage density in relaxor (K, Na, Bi)NbO3 ceramics10.1007/s10854-017-7521-2 ↗
6. Enhanced energy storage properties of {Bi0.5 [(Na0.8K0.2)1-zLiz]0.5}0.96Sr0.04 (Ti1-x-yTaxNby)O3 lead-free ceramics10.1016/j.ceramint.2017.07.060 ↗
7. Surface treatment and profile characterization of p-type graded band gap AlGaN material for preparing high performance photocathode10.1016/j.apsusc.2017.04.102 ↗
8. Novel electronic properties of a new MoS2/TiO2 heterostructure and potential applications in solar cells and photcatalysis10.1016/j.apsusc.2017.04.001 ↗
9. Applications of phosphorene and black phosphorus in energy conversion and storage devices10.1002/aenm.201702093 ↗
10. The magnetic moment of NiO nanoparticles determined by Mossbauer spectroscopy10.1088/0953-8984/18/17/005 ↗
11. Three-dimensional nanostructured graphene: synthesis and energy, environmental and biomedical applications10.1016/j.synthmet.2017.10.014 ↗
12. Boosting the photoluminescence of monolayer MoS2 on high-density nanodimer arrays with sub-10 nm gap10.1002/adom.201700984 ↗
13. Efficiency enhancement using voltage biasing for ferroelectric polarization in dye-sensitized solar cells10.1016/j.apsusc.2017.06.195 ↗
14. Photovoltaic properties of BiFeO3 thin film capacitors by using Al-doped zinc oxide as top electrode10.1016/j.matlet.2012.10.031 ↗
15. Bandgap tuning of multiferroic oxide solar cells10.1038/nphoton.2014.255 ↗
16. Photovoltaic effects in BiFeO310.1063/1.3204695 ↗
17. Effect of top electrodes and light sources on photovoltaic properties of polycrystalline Bi4Ti3O12 film10.1016/j.matlet.2016.05.084 ↗
18. Arising applications of ferroelectric materials in photovoltaic devices10.1039/C3TA14188H ↗
19. The ferroelectric photovoltaic spectral response regulated by band-gap in BiFe0.9Cr0.1O3 films10.1016/j.matlet.2016.04.054 ↗
20. Improved efficiency of ferroelectric Pb(Zr, Ti)O3 (PZT) based photovoltaic device with colloidal quantum dots10.1016/j.matlet.2016.08.082 ↗
21. Preparation and characteristics of MoSe2 interlayer in bifacial Cu(In,Ga)Se2 solar cells10.1016/j.phpro.2012.03.571 ↗
22. Above-bandgap voltages from ferroelectric photovoltaic devices10.1038/nnano.2009.451 ↗
23. SrTiO3/TiO2 composite electron transport layer for perovskite solar cells10.1016/j.matlet.2016.10.090 ↗
24. Physics and applications of bismuth ferrite10.1002/adma.200802849 ↗
25. Mechanism of the switchable photovoltaic effect in ferroelectric BiFeO310.1002/adma.201100805 ↗
26. Enhanced photovoltaic effects in A-site samarium doped BiFeO3 ceramics: the roles of domain structure and electronic state10.1016/j.jeurceramsoc.2015.12.019 ↗
27. Photovoltaic effect of a bilayer film with Bi4Ti3O12/BiFeO3 heterostructure10.1016/j.matlet.2015.05.008 ↗
28. Photovoltaic enhancement by Au surface-plasmon effect for La doped BiFeO3 films10.1039/C7TC03371K ↗
29. Remarkably enhanced photovoltaic effects and first-principles calculations in neodymium doped BiFeO310.1038/srep45164 ↗
30. Enhanced photovoltaic effects and switchable conduction behavior in BiFe0.6Sc0.4O3 thin films10.1016/j.actamat.2015.01.021 ↗
31. Multiferroic Bi2FeCrO6 based p-i-n heterojunction photovoltaic devices10.1039/C7TA01604B ↗
32. Enhanced photovoltaic effect in BiVO4 semiconductor by incorporation with an ultrathin BiFeO3 ferroelectric layer10.1021/am4004182 ↗
33. Nd doping of bismuth ferrite to tune electromagnetic properties and increase microwave absorption by magnetic-dielectric synergy10.1039/C5TC01684C ↗
34. Continuously controllable optical band gap in orthorhombic ferroelectric KNbO3-BiFeO3 ceramics10.1063/1.4982600 ↗
35. Self-polarized high piezoelectricity and its memory effect in ferroelectric single crystals10.1016/j.actamat.2016.12.017 ↗