Probing the origin of photocurrent in nanoparticulate organic photovoltaics
Source abstract
Abstract
Abstract Varying the donor–acceptor ratio is a common technique in optimising organic photovoltaic (OPV) device performance. Here we fabricate poly(3-hexylthiophene) (P3HT): phenyl C61 butyric acid methyl ester (PCBM) nanoparticle OPVs with varied donor–acceptor ratios from 1:0.5 to 1:2. Device performance increases with PCBM loading from 1:0.5 to 1:1, then surprisingly from 1:1 to 1:2 the performance plateaus, unlike reported trends in bulk heterojunction (BHJ) OPVs where device performance drops significantly as the donor:acceptor ratio increases beyond 1:1. Scanning transmission X-ray microscopy (STXM) measurements reveal core–shell nanoparticles for all donor:acceptor ratios with a systematic increase in the PCBM nanoparticle core volume observed as the PCBM loading is increased. This increases the functional PCBM domain size available for exciton harvesting, contrary to the result observed in BHJ OPV devices where increasing the PCBM loading does not lead to an increase in functional PCBM domains. In addition, STXM measurements reveal that the core–shell nanoparticles have core and shell compositions that change with PCBM loading. In particular, we observe that the PCBM component in the nanoparticle shell phase increases from a concentration that is below the percolation limit to one that is close to the optimal weight fraction for charge transport. This increase in the functional PCBM volume is reflected in an increase in PCBM photocurrent calculated from external quantum efficiency (EQE) measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Relation between photoactive layer thickness, 3D morphology, and device performance in P3HT/PCBM bulk-heterojunction solar cells10.1021/ma900817t ↗
2. Polymer crystallization of partially miscible polythiophene/fullerene mixtures controls morphology10.1021/ma200855r ↗
3. Controlling morphology in polymer–fullerene mixtures10.1002/adma.200701519 ↗
4. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
5. On the morphology of polymer-based photovoltaics10.1002/polb.23063 ↗
6. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
7. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells10.1002/adma.201202855 ↗
8. Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells10.1016/j.solmat.2009.01.019 ↗
9. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
10. Strategies for controlling the active layer morphologies in OPVs10.1002/polb.23073 ↗
11. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
12. Solubility of [6,6]-phenyl-C61-butyric acid methyl ester and optimal blending ratio of bulk heterojunction polymer solar cells10.1021/jp3028947 ↗
13. Correlation between ultrafast transient photomodulation spectroscopy and organic photovoltaic solar cell efficiency based on RR-P3HT/PCBM blends10.1016/j.orgel.2014.03.021 ↗
14. Fullerene contribution to photocurrent generation in organic photovoltaic cells
15. Crystallization-induced 10-nm structure formation in P3HT/PCBM blends10.1021/ma400403c ↗
16. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
17. Multilayered approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
18. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
19. Eco-friendly fabrication of 4% efficient organic solar cells from surfactant-free P3HT:ICBA nanoparticle dispersions10.1002/adma.201402360 ↗
20. Multiscale active layer morphologies for organic photovoltaics through self-assembly of nanospheres10.1021/nl502209s ↗
21. Nano-domain behaviour in P3HT:PCBM nanoparticles, relating material properties to morphological changes10.1016/j.solmat.2013.06.003 ↗
22. Modelling transport in nanoparticle organic solar cells using monte carlo methods10.1063/1.4829152 ↗
23. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
24. Experimental evidence for the quasi-living nature of the grignard metathesis method for the synthesis of regioregular poly(3-alkylthiophenes)10.1021/ma051122k ↗
25. Interferometer-controlled scanning transmission X-ray microscopes at the advanced light source10.1107/S0909049502017739 ↗
26. Employing MALDI-MS on poly(alkylthiophenes): analysis of molecular weights, molecular weight distributions, end-group structures, and end-group modifications10.1021/ma9905324 ↗
27. Quantitative analysis of bulk heterojunction films using linear absorption spectroscopy and solar cell performance10.1002/adfm.201101583 ↗
28. High molecular weights, polydispersities, and annealing temperatures in the optimization of bulk-heterojunction photovoltaic cells based on poly(3-hexylthiophene) or poly(3-butylthiophene)10.1002/adfm.200600005 ↗
29. Thermally stable bulk heterojunction solar cells based on cross-linkable acrylate-functionalized polythiophene diblock copolymers10.1021/ma3020905 ↗
30. Optical probes of chain packing structure and exciton dynamics in polythiophene films, composites, and nanostructures10.1002/polb.23105 ↗
31. The effect of polymer molecular weight on P3HT:PCBM nanoparticulate organic photovoltaic device performance10.1016/j.solmat.2014.05.046 ↗
32. Composition and annealing effects in polythiophene/fullerene solar cells10.1007/s10853-005-0568-0 ↗
33. Phase diagram of the P3HT:PCBM organic photovoltaic system: implications for device processing and performance10.1021/ma102524a ↗
34. A knife-edge measurement of the beam profile of STXM 5.3.2.2 using a focussed ion beam milled metallic glass10.1016/j.elspec.2012.07.003 ↗
35. Estimate of singlet diffusion lengths in pcbm films by time-resolved emission studies10.1016/j.cplett.2009.06.091 ↗
36. Conjugated polymer photovoltaic devices and materials10.1016/j.crci.2005.03.033 ↗
37. Effect of miscibility and percolation on electron transport in amorphous poly(3-hexylthiophene)/phenyl-C61-butyric acid methyl ester blends10.1103/PhysRevLett.108.026601 ↗
38. The importance of fullerene percolation in the mixed regions of polymer–fullerene bulk heterojunction solar cells,10.1002/aenm.201200637 ↗
39. Influence of composition and heat-treatment on the charge transport properties of poly(3-hexylthiophene) and [6,6]-phenyl C61-butyric acid methyl ester blends10.1063/1.2045554 ↗
40. Dynamical monte carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology10.1021/nl051098o ↗
41. Improvement of the light-harvesting efficiency in polymer/fullerene bulk heterojunction solar cells by interfacial dye modification10.1021/am800229p ↗