journal article·2013-10

Grain boundary investigations on sulfurized Cu(In,Ga)(S,Se)2 solar cells using atom probe tomography

J. Keller, R. Schlesiger, I. Riedel, J. Parisi, G. Schmitz, A. Avellan, T. Dalibor

Publisher page

Abstract

In this study grain boundaries (GBs) and grain interiors in a sulfurized Cu(In,Ga)(S,Se)2 (CIGSSe) photovoltaic thin film have been investigated by atom probe tomography. Grain boundaries could be clearly localized by the strong agglomeration of sodium, which was additionally observed in tube-shaped clusters. These GBs were proven to contain no oxygen or alkali metals which confirms the blocking function of the used diffusion barrier sputtered on the soda lime glass substrate. Further, the concentrations of the CIGSSe matrix atoms across the GBs were studied. Here, copper deficiency and enrichment appear to be correlated with the distance from the back contact (BC). Agglomeration of sulfur in all grain boundaries near to the BC indicates interface diffusion of sulfur. Moreover, our measurements reveal the existence of a thin layer upon the back contact in which the sulfur, copper and gallium contents are significantly increased. The corresponding band-gap widening may establish the function of minority carrier repulsion from the back contact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Materials Characterization Techniques · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Solar cell efficiency tables (version 39)10.1002/pip.2163 ↗
2. Crystalline Si thin-film solar cells10.1007/s003390050989 ↗
3. Anomalous grain boundary physics in polycrystalline CuInSe210.1103/PhysRevLett.91.266401 ↗
4. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier10.1063/1.2132537 ↗
5. Direct observation of copper depletion and potential changes at copper indium gallium diselenide grain boundaries10.1063/1.1906331 ↗
6. Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin films10.1063/1.1737796 ↗
7. Texture of Cu(In,Ga)Se2 thin films and nanoscale cathodoluminescence
8. Texture and electronic activity of grain boundaries in Cu(In,Ga)Se2 thin films10.1007/s00339-005-3411-1 ↗
9. Electrical activity at grain boundaries of Cu(In,Ga)Se2 thin films10.1103/PhysRevB.71.033306 ↗
10. Grain-boundary types in chalcopyrite-type thin films and their correlations with film texture and electrical properties10.1016/j.tsf.2008.11.044 ↗
11. Confined and chemically flexible grain boundaries in polycrystalline compound semiconductors10.1002/aenm.201100764 ↗
12. Direct insight into grain boundary reconstruction in polycrystalline Cu(In,Ga)Se2 with atomic resolution10.1103/PhysRevLett.108.075502 ↗
13. Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses10.1016/S0040-6090(00)01028-2 ↗
14. Surface passivation of polycrystalline, chalcogenide based photovoltaic cells
15. Effects of sodium on polycrystalline Cu(In,Ga)Se2 and its solar cell performance10.1002/(SICI)1521-4095(199801)10:1<31::AID-ADMA31>3.0.CO;2-3 ↗
16. Effects of Na on the electrical and structural properties of CuInSe210.1063/1.370534 ↗
17. Electronic effects of sodium in epitaxial CuInGaSe210.1063/1.366365 ↗
18. Reactive diffusion in nanostructures of spherical symmetry10.1016/j.actamat.2009.02.021 ↗
19. Atomic-scale characterization of the CdS/CuInSe2 interface in thin-film solar cells10.1063/1.3560308 ↗
20. Design of a laser-assisted tomographic atom probe at Münster University10.1063/1.3378674 ↗
21. Atom probe study of sodium distribution in polycrystalline Cu(In,Ga)Se2 thin film10.1016/j.actamat.2009.12.049 ↗
22. Characterization of grain boundaries in Cu(In,Ga)Se2 films using atom-probe tomography10.1109/JPHOTOV.2011.2170447 ↗
23. Atom probe study of Cu-poor to Cu-rich transition during Cu(In,Ga)Se2 growth10.1063/1.3665948 ↗
24. Comparative atom probe study of Cu(In,Ga)Se2 thin-film solar cells deposited on soda-lime glass and mild steel substrates10.1063/1.3665723 ↗
25. Second generation CIS solar modules10.1016/j.solener.2004.05.011 ↗
26. Nanoanalysis by atom probe tomography
27. Band offsets and optical bowings of chalcopyrites and Zn-based II–VI alloys10.1063/1.359901 ↗
28. Do built-in fields improve solar cell performance?10.1002/pip.851 ↗
29. Role of incorporated sulfur into the surface of Cu(In,Ga)Se2 thin-film absorber10.1016/S0927-0248(00)00288-9 ↗
30. Studies on sulfur diffusion into Cu(In,Ga)Se2 thin films10.1002/(SICI)1099-159X(200003/04)8:2<227::AID-PIP308>3.0.CO;2-G ↗
31. Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization10.1016/S0927-0248(97)00054-8 ↗
32. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
33. Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure10.1016/S0927-0248(00)00283-X ↗
34. Modeling image distortions in 3DAP10.1017/S1431927604040486 ↗
35. Chromatic aberrations in the field evaporation behavior of small precipitates10.1017/S1431927608080793 ↗
36. K. Decock, J. Lauwaert, M. Burgelman, Modelling thin film solar cells with graded band gap, in: 45th International Conference on Microelectronics Devices and Technologies, 2009, pp. 245–249.
37. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices10.1063/1.370758 ↗