journal article·2014-04

Cu2ZnSn(S,Se)4 solar cells from inks of heterogeneous Cu–Zn–Sn–S nanocrystals

Nathaniel J. Carter, Wei-Chang Yang, Caleb K. Miskin, Charles J. Hages, Eric A. Stach, Rakesh Agrawal

Publisher page

Abstract

Abstract The solution-based synthesis of quaternary Cu2ZnSnS4 (CZTS) nanocrystals and further processing into a homogeneous photovoltaic absorber film prove challenging due to the stability of binary and ternary chalcogenide compounds comprised of Cu, Zn, and Sn cations. In this contribution, CZTS nanocrystals are synthesized according to a previously reported synthesis recipe yielding devices with reported efficiencies as high as 7.2%. The particles are separated by size into two populations exhibiting size-correlated composition variations. This observation highlights the challenges in synthesizing quaternary CZTS nanoparticles with interparticle composition uniformity. Films of particles from each population are sintered in a selenium atmosphere and found to exhibit a notable degree of phase segregation in the final film, while a mixture of particles from both populations converts into a relatively homogeneous film upon selenization. Devices fabricated from the two particle populations separately as well as the mixture of particles exhibit varying degrees of performance, with the mixed particle cells achieving total area efficiencies as high as 7.9%. A modified synthesis recipe producing CZTS particles with narrower composition variations is shown to produce devices with improved efficiencies up to 8.4%. Preliminary conclusions regarding the effect of nanocrystal heterogeneity on film sintering and device performance are presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. N.J. Carter, C.J. Hages, J.E. Moore, S.M. McLeod, C.K. Miskin, C. Joglekar, M.S. Lundstrom, R. Agrawal, Analysis of temperature-dependent current–voltage characteristics for CIGSSe and CZTSSe thin film solar cells from nanocrystal inks, in: Proceedings of the 39th IEEE Photovoltaic Specialist Conference 2013.10.1109/PVSC.2013.6745107 ↗
2. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
3. Route toward high-efficiency single-phase Cu2ZnSn(S,Se)4 thin-film solar cells: model experiments and literature review10.1109/JPHOTOV.2011.2168811 ↗
4. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
5. Synthesis of Cu2ZnSnS4 nanocrystal ink and its use for solar cells10.1021/ja904981r ↗
6. Solution-based synthesis and characterization of Cu2ZnSnS4 nanocrystals10.1021/ja9044168 ↗
7. Synthesis of Cu2ZnSnS4 nanocrystals for use in low-cost photovoltaics10.1021/ja905922j ↗
8. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
9. 9.0% efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks
10. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses
11. Sulfide nanocrystal inks for dense Cu(In1−xGax)(S1−ySey)2 absorber films and their photovoltaics performance10.1021/nl901538w ↗
12. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗
13. Chemical composition dependence of morpholigical and optical properties of Cu2ZnSnS4 thin films deposited by sol-gel sulfurization and Cu2ZnSnS2 thin film solar cell efficiency10.1016/j.solmat.2010.10.031 ↗
14. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
15. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
16. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
17. Raman spectroscopy on thin films for solar cells
18. Fabrication of ternary Cu–Sn–S sulfides by a modified successive ionic layer adsorption and reaction (SILAR) method10.1039/c2jm31669b ↗
19. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
20. Raman spectrum of monoclinic semiconductor Cu2SnSe310.1016/j.ssc.2010.10.015 ↗
21. Concentration dependent vibrational mode behaviour in the mixed crystal system SnSxSe2−x10.1016/0022-2860(91)87062-M ↗
22. Raman scattering in amorphous selenium molecular structure and photoinduced crystallization10.1002/pssb.2221660133 ↗
23. Raman scattering from ZnSe nanolayer10.12693/APhysPolA.116.75 ↗
24. The Scherrer formula for x-ray particle size distribution10.1103/PhysRev.56.978 ↗
25. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗