Synthesis and characterization of 2,1,3-benzothiadiazole-thieno[3,2-b]thiophene-based charge transferred-type polymers for photovoltaic application
Source abstract
Abstract
Abstract New low-band-gap copolymers, including thieno[3,2-b]thiophene and 2,1,3-benzothiadiazole, were synthesized as photovoltaic materials. Thiophene was introduced to provide extended π-conjugation length and charge transfer properties. A band gap ( E g op =1.62 eV, E g ec =1.51 eV) of this polymer was investigated through UV–vis spectroscopy and cyclic voltammetry. A bulk heterojunction structure of glass/indium tin oxide (ITO)/PEDOT:PSS/polymer-PCBM(1:3)/LiF/Al was fabricated for investigating photovoltaic properties. PC 71 BM was used as an acceptor material, due to its increased absorption in the visible region, in comparison with PC 61 BM. In this polymer, incident photon-to-current conversion efficiency (IPCE) was as high as 50%. Moreover, maximum power conversion efficiency (PCE) of up to 1.72% was achieved under AM 1.5 G conditions. It demonstrated relatively high V OC (0.67 V) and J SC (6.86 mA/cm 2 ), while a low fill factor value (0.37) was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Electron-enhanced hole injection in blue polyfluorene-based polymer light-emitting diodes10.1002/adfm.200305178 ↗
2. White electroluminescence from a single-polymer system with simultaneous two-color emission: polyfluorene blue host and side-chain-located orange dopant10.1002/adfm.200600988 ↗
3. Organic semiconductors for solution-processable field-effect transistors (OFETs)10.1002/anie.200701920 ↗
4. Field-effect transistors based on a benzothiadiazole–cyclopentadithiophene copolymer10.1021/ja0683537 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
7. Photoconductivity of a low-bandgap conjugated polymer10.1002/adfm.200600199 ↗
8. Large-area organic photovoltaic module—fabrication and performance10.1016/j.solmat.2008.12.001 ↗
9. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
10. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
11. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
12. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
13. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
14. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
15. Low band gap polymers introduced quinoxaline derivertives and fused thiophene as donor materials for high efficiency bulk-heterojunction type photovoltaic cells10.1039/b823536h ↗
16. Highly disordered polymer field effect transistors: n-alkyl dithieno[3,2-b:2′,3′-d]pyrrole-based copolymers with surprisingly high charge carrier mobilities10.1021/ja803077v ↗
17. Low-band-gap conjugated polymers based on thiophene, benzothiadiazole, and benzobis(thiadiazole)10.1021/ma052683e ↗
18. Bulk heterojunctions based on a low band gap copolymer of thiophene and benzothiadiazole10.1016/j.solmat.2007.05.013 ↗
19. Large-area photovoltaics based on low band gap copolymers of thiophene and benzothiadiazole or benzo-bis(thiadiazole)10.1016/j.solmat.2007.01.013 ↗
20. Molecular control of luminescence from poly(3-hexylthiophenes)10.1021/ma00069a009 ↗
21. Dual electron donor/electron acceptor character of a conjugated polymer in efficient photovoltaic diodes10.1063/1.2738197 ↗
22. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
23. Benzothiadiazole- and pyrrole-based polymers bearing thermally cleavable solubilizing groups as precursors for low bandgap polymers10.1039/B601296P ↗
24. Design of narrow-bandgap polymers. Syntheses and properties of monomers and polymers containing aromatic-donor and o-quinoid-acceptor units10.1021/cm950467m ↗
25. Synthesis and structure–property relationship of new donor–acceptor-type conjugated monomers and polymers on the basis of thiophene and benzothiadiazole10.1002/pola.10107 ↗
26. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
27. Characteristics and fabrication of polymer light emitting diode using copolymer having perylene and triazine moieties in the polymer side chain
28. Synthesis and electro-optical properties of polythiophene derivatives for electroluminescence display10.1016/S0925-3467(02)00128-3 ↗
29. Structural and electronic effects of 1,3,4-thiadiazole units incorporated into polythiophene chains10.1021/ma071242n ↗
30. Deep-red electroluminescent polymers: synthesis and characterization of new low-band-gap conjugated copolymers for light-emitting diodes and photovoltaic devices10.1021/ma047969i ↗
31. Synthesis and properties of novel poly(p-phenylenevinylene) copolymers for near-infrared emitting diodes10.1016/j.eurpolymj.2005.05.039 ↗
32. Poly(2,5-bis(2-thienyl)-3,6-dialkylthieno[3,2-b]thiophene)s high-mobility semiconductors for thin-film transistors10.1002/adma.200601204 ↗
33. Synthesis and characterization of fluorine.thiophene-based p-conjugated polymers using coupling reaction10.1016/j.jiec.2008.05.005 ↗
34. Synthesis and characterization of a fluorene–quinoxaline copolymer for light-emitting applications
35. Chain-length dependence of electronic and electrochemical properties of conjugated systems: polyacetylene, polyphenylene, polythiophene, and polypyrrole10.1021/ja00360a004 ↗
36. Stability of n-type doped conducting polymers and consequences for polymeric microelectronic devices10.1016/S0379-6779(97)80097-5 ↗
37. Effect of cyano substituents on electron affinity and electron-transporting properties of conjugated polymers10.1021/ma011790f ↗
38. Synthesis and characterization of a novel and highly efficient light-emitting polymer10.1002/(SICI)1521-4044(19990201)50:2/3<105::AID-APOL105>3.0.CO;2-0 ↗
39. Design of organic semiconductors: tuning the electronic properties of p-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block10.1002/chem.200401058 ↗
40. Solution-processed bulk-heterojunction solar cells based on monodisperse dendritic oligothiophenes10.1002/adfm.200800584 ↗
41. Conjugated copolymers based on fluorene–thieno[3,2-b]thiophene for light-emitting diodes and photovoltaic cells10.1021/ma070575h ↗
42. Synthesis and electroluminescence of novel copolymers containing crown ether spacers10.1039/b209469j ↗
43. High photovoltaic performance of a low-bandgap polymer10.1002/adma.200600160 ↗
44. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗