journal article·2009-10Open access

Efficient organic tandem cell combining a solid state dye-sensitized and a vacuum deposited bulk heterojunction solar cell

Ingmar Bruder, Martin Karlsson, Felix Eickemeyer, Jaehyung Hwang, Peter Erk, Anders Hagfeldt, Jürgen Weis, Neil Pschirer

Abstract

The dye-sensitized solar cell (DSC) is a photovoltaic technology with the potential to efficiently and economically harvest and convert energy from the sun to electrical power. DSCs are built using abundant and low cost materials such as titanium dioxide (TiO2) and organic dye molecules. The dye molecule acts as a light absorber funneling electrons from its photo-excited state to the TiO2. A redox mediator which typical consists of iodide/tri-iodide undergoes redox reactions at the counter electrode and the oxidized dye molecule creating a circuit between the two. Solid-state versions of the DSC are also being investigated. In these devices the liquid electrolyte is exchanged with solid hole transporting material in order to both simplify the solar cell production as well as increasing the open-circuit potential and stability of the solar cell. One main draw-back, which limits the increase in conversion efficiency of solid-state DSC is the faster electron recombination dynamics between electrons in the TiO2 and holes in the solid hole transporter. Currently the highest performing liquid electrolyte DSC reaches a conversion efficiency of over 12 %, while the solid-state DSC is tailing with 7 %. Materials development is crucial for further development of the DSC technology, hopefully leading to better stability and higher efficiency. Many types of dye molecules, redox mediators as well as hole transporting materials and working electrode materials have all been tested and modified in the past in order to improve DSC performance. Significant further improvement of DSC technology requires a better understanding of the operating principle behind the DSC and the interaction between the different components. This requires advanced characterization methods for materials and solar cells. In this thesis, new materials for DSC have been developed, tested and characterized using advanced methods. Atomic layer deposition was employed to develop a new working electrodes based on the core-shell SnO2-TiO2 material. These working electrodes were successfully used in both liquid and solid-state DSC to decrease the electron recombination dynamics and increase conversion efficiencies. The molecular structure of sensitizing dyes also plays a major role in electron recombination. Thus, investigating different molecular structures of sensitizing dyes is of importance when trying to improve DSC performance. Seven new molecular dye structures based on three different chromophore units were investigated in both liquid electrolyte and solid-state DSC. For example, adding a second anchoring group on the D35 molecular structure improved the light harvesting capabilities of the dye but did not result in DSC devices with higher conversion efficiency. Increasing the bulkiness of the molecular dye structure facing away from the TiO2 surface yielded on the other hand higher both slower electron recombination and higher conversion efficiencies. The effects of oxygen on solid-state DSC using spiro-OMeTAD were also studied. The chemical oxidation of the solid-state hole transporting material was found to depend on both time and storing conditions of the complete DSC devices. Solar cells with higher conversion efficiency were found for solid-state DSC stored under ambient air conditions before measured. Finally, a novel and efficient organic tandem solar cell was demonstrated built using a solid-state DSC and a bulk heterojunction solar. The 6 % efficient tandem cell almost perfectly added the photo-potentials of the subcells together while keeping the photo-current intact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Fiber based organic photovoltaic devices10.1063/1.2927533 ↗
2. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
3. Organic small molecule solar cells with a homogeneously mixed copper phthalocyanine: C60 active layer10.1063/1.1755833 ↗
4. Dye sensitised mesoporous heterojunction solar cells showing high photon to electron conversion efficiencies10.1038/26936 ↗
5. Efficiency enhancements in solid-state hybrid solar cells via reduced charge recombination and increased light capture10.1021/nl071656u ↗
6. Organic dye for highly efficient solid-state dye-sensitized solar cells10.1002/adma.200401410 ↗
7. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
8. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
9. Effect of thin gold interstitial-layer on the photovoltaic properties of tandem organic solar cells10.1246/cl.1990.327 ↗
10. Tandem dye-sensitized solar cell for improved power conversion efficiencies10.1063/1.1723685 ↗
11. Dye-sensitized nanostructured tandem cell—first demonstrated cell with a dye-sensitized photocathode10.1016/S0927-0248(99)00168-3 ↗
12. Efficient organic solar cells based on a double p-i-n architecture using doped wide-gap transport layers10.1063/1.1935771 ↗
13. Asymmetric tandem organic photovoltaic cells with hybrid planar-mixed molecular heterojunctions10.1063/1.1829776 ↗
14. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
15. Double and triple junction polymer solar cells processed from solution10.1063/1.2719668 ↗
16. Efficient light harvesting in multiple-device stacked structure for polymer solar cells10.1063/1.2172741 ↗
17. Enhanced spectral coverage in tandem organic solar cells10.1063/1.2336593 ↗
18. Highly efficient organic tandem solar cells using an improved connecting architecture10.1063/1.2772208 ↗
19. Red LED (AlGalnP) with a luminous intensity of 8cd and a peak emission wavelength of 630nm.
20. Blue LED (InGaN) with a luminous intensity of 4.6cd and a peak emission wavelength of 472nm.
21. White LED (GaN/InGaN) with a luminous intensity of 18cd.
22. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
23. Angle dependence of external and internal quantum efficiencies in bulk-heterojunction organic solar cells10.1063/1.2777724 ↗
24. The angular response of ultrathin film organic solar cells10.1063/1.2949745 ↗