The spray-ILGAR® (ion layer gas reaction) method for the deposition of thin semiconductor layers: Process and applications for thin film solar cells
Source abstract
Abstract
Abstract The spray Ion Layer Gas Reaction (ILGAR) process starts with ultrasonic nebulisation of the precursor solution, e.g. InCl3/ethanol for our successful buffer material In2S3. In an aerosol assisted chemical vapour deposition (AACVD) type reaction an In(O,OH,Cl) film is deposited on a heated substrate and is subsequently converted to In2S3 by H2S gas. The cycle of these steps is repeated until the required layer thickness is obtained. The robust and reproducible process allows a wide control of composition and morphology. Results of this “spray-ILGAR” method with respect to process, material properties and its application depositing the buffer layer in chalcopyrite solar cells are reviewed. New aspects such as the investigation of the complex chemical mechanism by mass spectrometry, the process acceleration by the addition of H2S gas to the aerosol, the controlled deposition of ZnS nano-dot films and finally the latest achievements in process up-scaling are also included. Solar cells based on industrial Cu(In,Ga)(S,Se)2 absorbers (Avancis GmbH) with a Spray-ILGAR In2S3 buffer reached 14.7% efficiency (certified) and 15.3% with a ZnS/In2S3 bi-layer buffer comparable to reference cells using standard CdS buffer layers deposited by chemical bath deposition (CBD). The quasi-dry, vacuum-free ILGAR method for In2S3 buffer layers is well suited for industrial in-line production and is capable of not only replacing the standard buffer material (the toxic CdS) but also the often slow CBD process. A tape coater for 10 cm wide steel tape was constructed. It was shown that In2S3 layers could be produced with an indium yield better than 30% and a linear production speed of 1m/min. A roll-to-roll pilot production line for electrochemically deposited Cu(In,Ga)Se2 with ILGAR buffer is running in industry (CIS-Solartechnik, Hamburg). A 30x30 cm2 prototype of an ILGAR in-line coater developed by Singulus and Helmholtz Zentrum Berlin is currently being optimised. First 30×30 cm2 encapsulated modules achieved efficiencies up to 13.0% (CdS buffered reference 13.3%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A convenient synthesis of methylindium(III) dithiolate complexes—precursors for indium sulfides10.1002/aoc.981 ↗
2. Buffer layers in Cu(In,Ga)Se2 solar cells and modules10.1016/j.tsf.2004.11.118 ↗
3. Novel precursors for the growth of alpha-In2S3: trisdialkyldithiocarbamates of indium10.1016/S0040-6090(97)00691-3 ↗
4. N. Naghavi, S. Spiering, M. Powalla, D. Lincot, Record efficiencies for dry processed cadmium free CIGS solar cells with indium sulfide buffer layers prepared by atomic layer deposition (ALD), in: Proceedings Of 3rd World Conference On Photovoltaic Energy Conversion A-C Osaka, 2003 pp. 340–343.
5. Growth studies and characterisation of In2S3 thin films deposited by atomic layer deposition (ALD)10.1016/j.apsusc.2003.08.011 ↗
6. Highly-efficient Cd-free CuInS2 thin-film solar cells and mint-modules with Zn(S,O) buffer layers prepared by an alternative chemical bath process10.1002/pip.682 ↗
7. Hodes · 2003
8. K.Y. Xue, D.R. Chen, X.L. Jiao, Fabrication of crystalline mesoporous metal oxides and sulfides, Inorganic Chemistry 49 1191–1197.10.1021/ic902160m ↗
9. Ch.-H. Fischer, M.C. Lux-Steiner, J. Möller, R. Könenkamp, S. Siebentritt, Verfahren und Anordnung zur Herstellung dünner Metallchalkogenid-Schichten German Patent: DE 198 31 214.8, 1998.
10. Ch.-H. Fischer, H.–J. Muffler, M.C. Lux-Steiner Verfahren zur Herstellung dünner, schwer löslicher Beschictungen German Patent: DE 199 16 403.7.
11. A novel deposition technique for compound semiconductors on highly porous substrates: ILGAR10.1016/S0040-6090(99)00797-X ↗
12. Growth of zinc-sulfide thin-films with the successive ionic layer adsorption and reaction method as studied by atomic-force microscopy10.1039/JM9950500985 ↗
13. Ultrasonically sprayed indium sulfide buffer layers for Cu(In,Ga)(S,Se)2 thin-film solar cells10.1016/j.tsf.2008.10.135 ↗
14. Ion layer gas reaction (ILGAR)—conversion, thermodynamic considerations and related FTIR analyses10.1016/S0022-0248(02)00949-1 ↗
15. ILGAR technology IV: ILGAR thin film technology extended to metal oxides
16. Thin films prepared by ion layer gas reaction (ILGAR)
17. Replacement of the CBD-CdS buffer and the sputtered i-ZnO layer by an ILGAR-ZnO WEL: optimization of the WEL deposition10.1016/S0927-0248(02)00112-5 ↗
18. Spray-ion layer gas reaction (ILGAR)—a novel low-cost process for the deposition of chalcopyrite layers up to the micrometer range for photovoltaic applications10.1021/jp034911h ↗
19. Indium sulfide thin films deposited by the spray ion layer gas reaction technique10.1016/j.tsf.2006.01.019 ↗
20. Kodas · 1999
21. Adducts of InCl3 with lewis bases: crytsal and molecular structure of ((InCl3)2(DME)3)10.1016/0277-5387(94)00449-O ↗
22. A study of indium alkoxides
23. S. Gledhill, R. Allison, N. Allsop, R. Saez-Araoz, E. Kanaki, Y.-P. Fu, C.H. Fischer, M. Lux-Steiner, The reaction mechanism of the spray ion layer gas reaction (ILGAR) process to deposit indium sulphide thin films, Thin Solid Films (submitted for publication).
24. Optical-Absorption Of Co2+ Ions In In2S3 Thin-Films10.1016/0040-6090(93)90460-7 ↗
25. Optical-Energy Gaps Of Beta- In2S3 Thin-films grown by spray pyrolysis10.1063/1.337137 ↗
26. Spray-ILGAR indium sulfide buffers for Cu(In, Ga)(S, Se)2 solar cells10.1002/pip.655 ↗
27. Deposition of In2S3 on Cu(In, Ga)(S, Se)2 thin film solar cell absorbers by spray ion layer gas reaction: evidence of strong interfacial diffusion10.1063/1.2717534 ↗
28. Cu in In2S3: interdiffusion phenomena analysed by high kinetic energy X-ray photoelectron spectroscopy10.1002/pssa.200881162 ↗
29. The dry and damp heat stability of chalcopyrite solar cells prepared with an indium sulfide buffer deposited by the spray-ILGAR technique10.1016/j.tsf.2005.11.096 ↗
30. Nanostructured ZnS: In2S3 buffer layers on Cu(In,Ga)(S,Se)(2): Can voltage and efficiency be improved through interface inhomogeneities on a scale below the minority carrier diffusion length?
31. N.A. Allsop, T.P. Niesen, S.E. Gledhill, M. Kruger, T. Kohler, M.C. Lux-Steiner, C.H. Fischer, Up-scaling ILGAR In2S3 buffer layers production for chalcopyrite solar modules, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference1–3, 2009, pp. 2212–2216.
32. A. Inc., ANSYS CFX-solver theory guide, Canonsburg PA 15317, 2009.
33. Two equation eddy-viscosity turbulence models for engineering applications10.2514/3.12149 ↗
34. Turbulance modeling validation testing and development
35. C. Camus, N.A. Allsop, T. Kohler, M. Kruger, S.E. Gledhill, J. Klaer, J. Rappich, M.C. Lux-Steiner, C.H. Fischer, Non-vacuum chalcopyrite solar cell absorbers: the spray-ILGAR approach, in: Proceedings of the 33rd IEEE Photovoltaic Specialists Conference 1–4 (2008) pp. 539–544.10.1109/PVSC.2008.4922468 ↗
36. Properties of spray ILGAR CuInS2 thin films10.1016/j.tsf.2007.12.069 ↗
37. Phonon confinement and strain in CuInS210.1063/1.2894519 ↗
38. A spray pyrolysis route to the undoped ZnO layer of Cu(In,Ga)(S,Se)(2) solar cells10.1016/j.tsf.2008.10.110 ↗
39. S.E. Gledhill, T.P. Niesen, N.A. Allsop, G. Gimpl, M. Kruger, T. Kohler, A. Belaidi, M.C. Lux-Steiner, C.H. Fischer, Improvement in spray deposition of the intrinsic ZnO window layer for chalcopyrite solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference 1–3, 2009, pp. 65–69.10.1109/PVSC.2009.5411571 ↗
40. Towards lower deposition temperatures of spray deposited ZnO films
41. Sophie Gledhill, Anton Zykov, Nicholas Allsop, Thorsten Rissom, Jan Schniebs, Christian A. Kaufmann, Martha Lux-Steiner, Christian-Herbert Fischer, Spray pyrolysis of barrier layers for flexible thin film solar cells on steel, Sol. Energy Mater. Sol. Cells, in press, doi:10.1016/j.solmat.2010.09.010.10.1016/j.solmat.2010.09.010 ↗
42. ZnO-nanorod arrays for solar cells with extremely thin sulfidic absorber10.1016/j.solmat.2008.11.035 ↗
43. Influence of the local absorber layer thickness on the performance of ZnO nanorod solar cells10.1002/pssr.200802092 ↗