Time to failure modeling of silver nanowire transparent conducting electrodes and effects of a reduced graphene oxide over layer
Source abstract
Abstract
Transparent conducting electrodes (TCE) with increased robustness and stability were produced from a composite of silver nanowires (AgNW) and reduced graphene oxide (GO) using ultrasonic spray coating. Ultrasonic spray coating is suited for large area depositions and thin films of AgNW and reduced GO TCEs with consistent optoelectronic properties were produced using this method and the reduction of GO was kept environmentally friendly by using ascorbic acid (AA) as the reducing agent. TCEs produced in this manner were highly conductive and had an average sheet resistance of 5.3 Ω/□ and an average transmittance of 64.9% ― the best TCE produced in this manner had a figure of merit of 190. Here, AgNWs were protected from humidity induced degradation and the effect of capillary instability at elevated temperatures on the nanowires was retarded by the introduction of a GO–AA over layer. A τ value of 1.5×10−9 was found to signify the onset of capillary instability induced failure in the AgNW TCE and from experimentally supported calculations, it was predicted that the lifetimes of nanowire TCEs under thermal degradation could be extended significantly by keeping the gaseous environment oxygen free.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Highly conductive flexible transparent electrodes fabricated by combining graphene films and inkjet-printed silver grids10.1016/j.solmat.2014.01.040 ↗
2. Investigations on reduced graphene oxide film embedded with silver nanowire as a transperent conducting electrode10.1016/j.solmat.2014.05.013 ↗
3. Silver nanowire networks: physical properties and potential integration in solar cells10.1016/j.solmat.2013.09.015 ↗
4. Silver nanowire transparent electrodes for liquid crystal-based smart windows10.1016/j.solmat.2014.09.006 ↗
5. Embedded inkjet printed silver grids for ITO-free organic solar cells with high fill factor10.1016/j.solmat.2014.03.024 ↗
6. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
7. Transparent conducting films based on graphene oxide/silver nanowire hybrids with high flexibility10.1016/j.synthmet.2012.05.026 ↗
8. Thermally induced percolational transition and thermal stability of silver nanowire networks studied by THz spectroscopy10.1021/am5057618 ↗
9. Three-dimensional highly conductive graphene-silver nanowire hybrid foams for flexible and stretchable conductors10.1021/am505908d ↗
10. Biaxially stretchable transparent conductors that use nanowire networks10.1557/jmr.2014.338 ↗
11. Very long Ag nanowire synthesis and its application in a highly transparent, conductive and flexible metal electrode touch panel10.1039/c2nr31254a ↗
12. Influences of textures in fluorine-doped tin oxide on characteristics of dye-sensitized solar cells10.1016/j.orgel.2011.08.027 ↗
13. Optical haze of transparent and conductive silver nanowire films,10.1007/s12274-013-0323-9 ↗
14. Failure of silver nanowire transparent electrodes under current flow10.1186/1556-276X-8-235 ↗
15. 2D graphene oxide nanosheets as an adhesive over-coating layer for flexible transparent conductive electrodes10.1038/srep01112 ↗
16. Improved thermal oxidation stability of solution-processable silver nanowire transparent electrode by reduced graphene oxide10.1021/am301913w ↗
17. Highly stable and flexible silver nanowire-graphene hybrid transparent conducting electrodes for emerging optoelectronic devices10.1039/c3nr02320f ↗
18. Are there fundamental limitations on the sheet resistance and transmittance of thin graphene films?10.1021/nn100343f ↗
19. Vitamin C is an ideal substitute for hydrazine in the reduction of graphene oxide suspensions10.1021/jp100603h ↗
20. Environment-friendly method to produce graphene that employs vitamin c and amino acid10.1021/cm902635j ↗
21. One-step synthesis of reduced graphite oxide–silver nanocomposite10.1016/j.materresbull.2011.07.013 ↗
22. An environmentally friendly and fast approach to prepare reduced graphite oxide with water and organic solvents solubility10.1016/j.colsurfb.2012.06.008 ↗
23. Reduction of graphene oxide via L-ascorbic acid10.1039/B917705A ↗
24. The electrochemical behavior of AA and DA on graphene oxide modified electrodes containing various content of oxygen functional groups10.1016/j.jelechem.2011.06.034 ↗
25. Preparation of graphitic oxide10.1021/ja01539a017 ↗
26. Four-probe resistivity measurements on small circular specimens10.1088/0508-3443/12/8/312 ↗
27. Four-point probe measurement of non-uniformities in semiconductor sheet resistivity10.1016/0038-1101(64)90038-3 ↗
28. Large-scale synthesis and characterization of very long silver nanowires via successive multistep growth10.1021/cg301119d ↗
29. Efficient welding of silver nanowire networks without post-processing10.1002/smll.201203142 ↗
30. Size effect on melting temperature of nanosolids10.1016/j.physb.2005.06.035 ↗
31. Surface tension and thermodynamic properties of liquid Ag-Bi solutions10.1007/s11669-003-0005-5 ↗
32. Zinc diffusion in alpha brass
33. Diffusion of zinc in alpha brass
34. Formation of nanotubes and hollow nanoparticles based on Kirkendall and diffusion processes: a review10.1002/smll.200700382 ↗
35. X-ray photoelectron spectroscopy: silver salts revisited10.1016/j.vacuum.2012.05.031 ↗
36. On the instability of jets10.1112/plms/s1-10.1.4 ↗
37. Morphological evolution of Au nanowires controlled by Rayleigh instability10.1088/0957-4484/17/24/009 ↗
38. Fragmentation of nanowires driven by Rayleigh instability10.1063/1.1826237 ↗
39. On the spheroidization of rod-shaped particles of finite length10.1007/BF02396641 ↗
40. Morphological changes of a surface of revolution due to capillarity‐induced surface diffusion10.1063/1.1714360 ↗
41. Theory of thermal grooving10.1063/1.1722742 ↗
42. Theory of sintering of wires by surface diffusion10.1016/0001-6160(68)90079-5 ↗
43. Rayleigh-instability-driven simultaneous morphological and compositional transformation from Co nanowires to CoO octahedra10.1063/1.3518470 ↗
44. Controlling the Rayleigh instability of nanowires10.1063/1.4801766 ↗
45. An investigation of the surface self-diffusion coefficients of pure copper and silver by the grain boundary grooving technique10.1016/0036-9748(70)90147-X ↗
46. Surface self-diffusion and faceting on silver10.1016/0001-6160(63)90191-3 ↗
47. Surface self-diffusion of silver in various atmospheres10.1016/0001-6160(65)90199-9 ↗
48. Effect of sheet resistance of Ag-nanowire-based electrodes on cell-performances of ITO-free organic solar cells10.1088/0268-1242/28/12/125008 ↗