journal article·2021-08

Microstructural analysis of the PV module cementation process at the Solar Platform of the Atacama Desert

Douglas Olivares, Pablo Ferrada, Aitor Marzo, Jaime Llanos, Carol Miranda-Ostojic, Valeria del Campo, Sergio Bravo, Edward Fuentealba

Publisher page

Abstract

Abstract The understanding of soiling processes on photovoltaic modules is a necessary step for the development of cost-effective mitigation methods for the solar industry. This paper analyzes the soiling process for photovoltaic modules installed at the Atacama Desert. For this purpose, the dust deposited on photovoltaic modules and glasses (for one year) was characterized and the location's atmospheric parameters were monitored continuously. The dust samples were separated according to difference in solubility, obtaining three samples: soluble (recrystallized), insoluble (filtered), and original. Through x-ray diffraction measurements it was detected that the soluble part corresponds to gypsum and the other dust components are insoluble or low-solubility salts such as albite, anhydrite, calcite, quartz, and orthoclase. Scanning electron microscopy and energy dispersive x-ray spectroscopy of the dust on photovoltaic glasses show the presence of gypsum with a monoclinic prismatic structure covered with smaller dust particles. These prismatic crystals are also observed after recrystallization of the soluble sample suggesting that gypsum, as a soluble hygroscopic material, has a key role in the cementation process. Atmospheric parameters of each season were characterized through wind velocity, temperature, and relative humidity. All these parameters show large daily oscillation, which trigger a cementation process in which gypsum crystallization, after being completely or partially solubilized, causes the encapsulation of insoluble material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Potential-induced degradation in photovoltaic modules: a critical review10.1039/C6EE02271E ↗
2. Effects of photovoltaic module soiling on glass surface resistance and potential-induced degradation
3. Impact of rain and soiling on potential induced degradation10.1002/pip.2786 ↗
4. Soiling and cleaning of polymer film solar reflectors10.3390/en9121006 ↗
5. Investigation on the impact of module cleaning on the antireflection coating
6. Soiling and abrasion testing of surfaces for solar energy systems adapted to extreme climatic conditions
7. Sandstorm erosion testing of anti-reflective glass coatings for solar energy applications10.1016/j.solmat.2018.02.018 ↗
8. Indoor soil deposition chamber: evaluating effectiveness of antisoiling coatings10.1109/JPHOTOV.2018.2877021 ↗
9. Effects of natural dust on the performance of PV panels in Bangladesh10.5815/ijmecs.2012.10.04 ↗
10. Performance evaluation of CdTe PV modules under natural outdoor conditions in Kuwait
11. Effect of dust accumulation on performance of photovoltaic solar modules in Sahara environment
12. The effect of tilt angle on performance of photovoltaic systems in Tehran10.1016/S0960-1481(01)00029-5 ↗
13. Effects of soiling on photovoltaic (PV) modules in the Atacama Desert10.1038/s41598-018-32291-8 ↗
14. Determination of the soiling impact on photovoltaic modules at the coastal area of the Atacama Desert10.3390/en13153819 ↗
15. Review of PV soiling particle mechanics in desert environments10.1016/j.rser.2017.03.100 ↗
16. Saharan dust transport to Europe and its impact on photovoltaic performance: a case study of soiling in Portugal10.1016/j.solener.2017.11.059 ↗
17. Experimental study on the effect of dust deposition on solar photovoltaic panels in desert environment10.1016/j.renene.2016.02.031 ↗
18. The effect of environmental factors and dust accumulation on photovoltaic modules and dust-accumulation mitigation strategies10.1016/j.rser.2017.09.042 ↗
19. Influence of dust and mud on the optical, chemical, and mechanical properties of a pv protective glass10.1038/srep15833 ↗
20. Accurately measuring PV soiling losses with soiling station employing module power measurements
21. Aeolian dust deposition on photovoltaic solar cells: the effects of wind velocity and airborne dust concentration on cell performance10.1016/S0038-092X(99)00028-6 ↗
22. Microparticle detachment from surfaces exposed to turbulent air flow: effects of flow and particle deposition characteristics10.1016/j.jaerosci.2004.01.002 ↗
23. Evaluation of the adhesion forces between dust particles and photovoltaic module surfaces10.1016/j.solmat.2018.11.031 ↗
24. Soiling particle interactions on PV modules: surface and inter-particle adhesion and chemistry effects
25. PV coatings and particle adhesion forces PV coatings and particle adhesion forces
26. Characterization of dust accumulated on photovoltaic panels in Doha, Qatar10.1016/j.solener.2016.11.053 ↗
27. Dust effect and its economic analysis on PV modules deployed in a temperate climate zone10.1016/j.egypro.2016.10.154 ↗
28. Theoretical considerations of soil retention10.1016/0165-1633(80)90047-7 ↗
29. Microstructural analysis of the cementation process during soiling on glass surfaces in arid and semi-arid climates10.1002/pssr.201600152 ↗
30. Updated world map of the Köppen-Geiger climate classification10.5194/hess-11-1633-2007 ↗
31. Sunbelt spectra comparison with standard ASTM G173: the Chilean case10.1063/1.5067195 ↗
32. Dust effect on flat surfaces – a review paper10.1016/j.rser.2014.02.016 ↗
33. Investigation of factors affecting condensation on soiled PV modules10.1016/j.solener.2017.10.089 ↗
34. New Powder Diffraction File (PDF-4) in relational database format: advantages and data-mining capabilities10.1107/S0108768102002458 ↗
35. 2012
36. Potential for photogenerated current for silicon based photovoltaic modules in the Atacama Desert10.1016/j.solener.2017.01.053 ↗
37. Characterization of soiling on PV modules in the Atacama Desert10.1016/j.egypro.2017.09.263 ↗
38. Physicochemical characterization of soiling from photovoltaic facilities in arid locations in the Atacama Desert10.1016/j.solener.2019.05.034 ↗
39. Fundamentals of soiling processes on photovoltaic modules10.1016/j.rser.2018.09.015 ↗
40. Gypsum: a review of its role in the deterioration of building materials10.1007/s00254-006-0566-9 ↗
41. Neogene evaporites in desert volcanic environments: Atacama Desert, northern Chile10.1046/j.1365-3091.2001.00428.x ↗
42. Mineralogy and chemistry of desert roses , ayn dar area , abqaiq , eastern province , Saudi arabia
43. Desert gypsum crusts as palaeoenvironmental indicators : a micropetrographic study of crusts from southern Tunisia and the central Namib Desert10.1016/S0140-1963(18)31002-4 ↗
44. Applied Geochemistry Stable isotopic composition of soil calcite ( O , C ) and gypsum ( S ) overlying Cu deposits in the Atacama Desert , Chile : implications for mineral exploration , salt sources , and paleoenvironmental reconstruction10.1016/j.apgeochem.2012.10.030 ↗
45. Gypsum crystals in soils10.1111/j.1365-2389.1992.tb00147.x ↗
46. Geotechnical characterization of saline soils
47. Comparing indoor and outdoor soiling experiments for different glass coatings and microstructural analysis of particle caking processes10.1109/JPHOTOV.2017.2775439 ↗
48. Self-cleaning of Surfaces : the role of surface wettability and dust types
49. Dry deposition of large , airborne particles onto a surrogate surface10.1016/S1352-2310(99)00444-6 ↗
50. Performance reduction of PV systems by dust deposition10.1016/j.egypro.2014.10.013 ↗
51. Importance of cleaning concentrated photovoltaic arrays in a desert environment10.1016/j.solener.2014.08.001 ↗
52. Daily global solar radiation estimation in desert areas using daily extreme temperatures and extraterrestrial radiation10.1016/j.renene.2017.01.061 ↗
53. Hourly PV production estimation by means of an exportable multiple linear regression model10.1016/j.renene.2018.12.014 ↗
54. Portal de Servicios Climáticos
55. Effect of wettability on adhesion force between silica particles evaluated by atomic force microscopy measurement as a function of relative humidity10.1021/la981533c ↗
56. Impactor apparatus for the study of particle rebound: relative humidity and capillary forces10.1080/02786826.2013.853866 ↗
57. Controlled wind tunnel experiments for particle bounceoff and resuspension10.1080/02786829208959574 ↗
58. “ Variabilidad estacional del transporte eólico de partículas en mejillones (~ 23°S) e implicancias paleoceanográficas ,”
59. Optical losses of photovoltaic modules due to mineral dust deposition: experimental measurements and theoretical modeling10.1016/j.solener.2018.02.030 ↗
60. Natural soiling of photovoltaic cover plates and the impact on transmission10.1016/j.renene.2014.12.006 ↗
61. Effectively predict the solar radiation transmittance of dusty photovoltaic panels through Lambert-Beer law10.1016/j.renene.2018.02.046 ↗
62. Modelling photovoltaic soiling losses through optical characterization10.1038/s41598-019-56868-z ↗
63. Dust-induced shading on photovoltaic modules10.1002/pip.2230 ↗
64. Study of soiling loss on photovoltaic modules with artificially deposited dust of different gravimetric densities and compositions collected from different locations in India10.1109/JPHOTOV.2015.2495208 ↗
65. Anti-reflective coated glass and its impact on bifacial modules' temperature in desert locations10.1016/j.egypro.2016.07.024 ↗
66. Advancements in the development of ‘“AtaMo”’: a solar module adapted for the climate conditions of the Atacama Desert in Chile - the impact of soiling and abrasion, 32nd