journal article·2020-04

A double hole-transport layer strategy toward efficient mixed tin-lead iodide perovskite solar cell

Jiaxing Song, Weidong Hu, Zaifang Li, Xiao-Feng Wang, Wenjing Tian

Publisher page

Abstract

Abstract Mixed tin (Sn)-lead (Pb) iodide perovskite is considered the most promising low-bandgap photovoltaic material for pursuing both low toxicity and high performance of perovskite solar cells (PSCs). However, their performance is still lagging behind the full Pb-based analogues. In PSCs, the hole transport layer (HTL) is one of the most important fundamentals to affect the device performance. Herein, the (FASnI3)0.6(MAPbI3)0.4 PSCs with an inverted structure were successfully fabricated, where a bilayer structure of CuI/PEDOT:PSS was employed as HTL. It is observed that the CuI/PEDOT:PSS film has a smooth morphology with good interfacial contact and the introduced CuI can partly affect the crystallization behavior of (FASnI3)0.6(MAPbI3)0.4 to facilitate high-quality perovskite film growth. Simultaneously, the cascading energy alignment in the device together with the high mobility of CuI provided the efficient hole extraction and transport from perovskite to anode. Besides, the photovoltaic performance was observed to be significantly dependent on the concentration of CuI that determines its thickness, as evidenced by the electrochemical impedance spectroscopy measurement. Consequently, by using a double-layer CuI/PEDOT:PSS as HTL with the CuI concentration of 10 mg ml−1, the fabricated PSCs based on 60% Sn perovskite lead to an improved champion power conversion efficiency of ~15.75% with negligible J-V hysteresis. Importantly, the double HTL of CuI/PEDOT:PSS makes the PSCs show improved stability, which is a critical characteristic for the advancement of PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
3. Elimination of the light soaking effect and performance enhancement in perovskite solar cells using a fullerene derivative10.1039/C6EE01337F ↗
4. Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber10.1039/C7TA03331A ↗
5. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
6. Low-temperature-processed ZnO-SnO2 nanocomposite for efficient planar perovskite solar cells10.1016/j.solmat.2015.09.054 ↗
7. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
8. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1038/nature12340 ↗
9. Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition10.1039/C4EE01624F ↗
10. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
11. Magnesium-doped zinc oxide as electron selective contact layers for efficient perovskite solar cells10.1002/cssc.201600860 ↗
12. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
13. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
14. Highly reproducible Sn-based hybrid perovskite solar cells with 9% efficiency10.1002/aenm.201702019 ↗
15. Lead-free solid-state organic-inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
16. Lead-free organic-inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
17. Lead-free halide perovskite solar cells with high photocurrents realized through vacancy modulation10.1002/adma.201401991 ↗
18. Solvent-mediated crystallization of CH3NH3SnI3 films for heterojunction depleted perovskite solar cells10.1021/jacs.5b06658 ↗
19. Fabrication of efficient formamidinium tin iodide perovskite solar cells through SnF2-pyrazine complex10.1021/jacs.6b00142 ↗
20. Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%10.1002/adma.201602992 ↗
21. Binary-metal perovskites toward high-performance planar-heterojunction hybrid solar cells10.1002/adma.201401641 ↗
22. Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells10.1021/ja5033259 ↗
23. CH3NH3SnxPb(1–x)I3 perovskite solar cells covering up to 1060 nm10.1021/jz5002117 ↗
24. 50% Sn-based planar perovskite solar cell with power conversion efficiency up to 13.6%10.1002/aenm.201601353 ↗
25. Fabrication of efficient low-bandgap perovskite solar cells by combining formamidinium tin iodide with methylammonium lead iodide10.1021/jacs.6b08337 ↗
26. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
27. Dianetti · Sol. Energy Mater. Sol. Cells · 2015 · 140 · 15010.1016/j.solmat.2015.03.016 ↗
28. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
29. A nonionic surfactant simultaneously enhancing wetting property and electrical conductivity of PEDOT:PSS for vacuum-free organic solar cells10.1016/j.solmat.2015.02.024 ↗
30. Copper iodide-PEDOT: PSS double hole transport layers for improved efficiency and stability in perovskite solar cells10.1016/j.jphotochem.2018.02.018 ↗
31. Low-cost solution-processed copper iodide as an alternative to PEDOT:PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
32. Solution-processed copper iodide as an inexpensive and effective anode buffer layer for polymer solar cells10.1021/jp412784q ↗
33. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗
34. Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells10.1016/j.solener.2015.07.040 ↗
35. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
36. Performance enhancement of high temperature SnO2-based planar perovskite solar cells: electrical characterization and understanding of the mechanism10.1039/C6TA01839D ↗
37. Low-bandgap mixed tin-lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
38. HC(NH2)2PbI3 as a thermally stable absorber for efficient ZnO-based perovskite solar cells10.1039/C6TA01074A ↗
39. Black phosphorus quantum dots as dual-functional electron-selective materials for efficient plastic perovskite solar cells10.1039/C8TA01408F ↗
40. Multifunctional fullerene derivative for interface engineering in perovskite solar cells10.1021/jacs.5b10614 ↗
41. Integrating ultrathin bulk-heterojunction organic semiconductor intermediary for high-performance low-bandgap perovskite solar cells with low energy loss10.1002/adfm.201804427 ↗