Influence of sulfurization temperature on photovoltaic properties of Ge alloyed Cu2SnS3 (CTGS) thin film solar cells
Source abstract
Abstract
Abstract Ge alloyed Cu 2 SnS 3 (CTGS) thin films were prepared by annealing the sputtered deposited Cu-Ge-Sn precursor films under sulfur atmosphere at different annealing temperatures. The influence of different annealing temperatures on morphological, compositional, crystal structure of CTGS thin films were investigated. It was found that the annealing temperature of 550 °C provides a favorable sulfurization environment to promote grain growth leading to a compact thin film formation. Improved performance is ascribed to high Ge contents as evidenced from X-ray fluorescence (XRF) studies. Well incorporated Ge atoms into CTS thin film can be confirmed by X-ray diffraction (XRD). X-ray photoelectron spectroscopy (XPS) study provides an evidence of existence of Ge atoms where its binding energy located at 25.78 and 26.78 eV, respectively. However, the decreased performance was found at unsuitable annealing temperatures such as 500 °C, 520 °C, 580 °C and 600 °C. Finally, with annealing temperatures of 550 °C, the best power conversion efficiency (PCE) of 2.14% was attained with an open circuit voltage ( V oc ) of 220 mV, a short circuit current density ( J sc ) of 23.74 mA/cm 2 and a fill factor ( FF ) of 41%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. ZSW achieves world record CIGS lab cell efficiency of 22.6%, Jun 15, 〈https://www.pv-tech.org/news/zsw-achieves-world-record-cigs-lab-cell-efficiency-of-22.6〉, 2016.
2. First solar hits record 22.1% conversion efficiency for CdTe solarcell, Feb 23, 〈https://www.greentechmedia.com/articles/read/First-Solar-Hits-Record-22.1-Conversion-Efficiency-For-CdTe-Solar-Cell〉, 2016.
3. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
4. Colloidal wurtzite Cu2SnS3 (CTS) nanoparticles and their applications in solar cells10.1021/acs.chemmater.6b00176 ↗
5. A simple aqueous solution processing of earth-abundant Cu2SnS3 absorbers for thin-film solar cells10.1021/acsami.6b02167 ↗
6. Cu2SnS3 thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
7. Fabrication of sputtered depositedCu2SnS3(CTS) thin film solar cell with power conversion efficiency of 2.39%10.1016/j.jallcom.2017.01.191 ↗
8. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗
9. Cu2SnS3 thin-film solar cells from electroplated precursors10.7567/JJAP.51.10NC34 ↗
10. Cu2SnS3 and Cu4SnS4 thin films via chemical deposition for photovoltaic application10.1149/1.3384660 ↗
11. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
12. Large efficiency improvement in Cu2ZnSnSe4 solar cells by introducing a superficial Ge nanolayer10.1002/aenm.201501070 ↗
13. Cu2Sn1− xGexS3 solar cells fabricated with a graded bandgap structure10.7567/APEX.9.072301 ↗
14. Fabrication of efficient Cu2ZnSnS4 solar cells by sputtering single stoichiometric target10.3390/coatings7020019 ↗
15. Scragg · 2011
16. Baranowski · Chem. Mater. · 2014 · 26 · 495110.1021/cm501339v ↗
17. Structural characterization ofCu2SnS3and Cu2(Sn,Ge)S3compounds10.1016/j.jallcom.2016.05.005 ↗
18. Chen · Phys. Rev. B · 2010 · 81 · 24520410.1103/PhysRevB.81.245204 ↗
19. Cu2Sn1−xGexS3 (x = 0.17) thin-film solar cells with high conversion efficiency of 6.0%
20. Influence of annealing temperature on the properties and solar cell performance of Cu2SnS3(CTS) thin film prepared using sputtering method10.1016/j.jallcom.2016.06.264 ↗
21. Effect of post-sulfurization on the composition, structure and optical properties of Cu2ZnSnS4 thin films deposited by sputtering from a single quaternary target10.1016/j.apsusc.2012.09.140 ↗
22. Lanos · J. Alloy. Compd. · 1996 · 234 · 4010.1016/0925-8388(95)02062-4 ↗
23. Li · J. Phys. Chem. C · 2012 · 116 · 2650710.1021/jp307346k ↗
24. Growth mechanism of Ge-doped CZTSSe thin film by sputtering method and solar cells10.1039/C6CP05671G ↗
25. High open-circuit voltage of ternary Cu2GeS3 thin film solar cells from combustion synthesized Cu-Ge alloy10.1016/j.solmat.2016.11.001 ↗
26. Improved performance of Ge-alloyed CZTGeSSe thin-film solar cells through control of elemental losses10.1002/pip.2442 ↗
27. Influence of Ge composition in the Cu2Sn1−xGexS3 thin film photovoltaic absorber prepared by sulfurization of laminated metallic precursor10.1016/j.solmat.2015.04.030 ↗
28. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗