journal article·2016-03

Reflection and durability study of different types of backsheets and their impact on c-Si PV module performance

Namsu Kim, Seoungsoo Lee, Xing Guan Zhao, Dajung Kim, Chulmin Oh, Hanjun Kang

Publisher page

Abstract

Abstract The performance of crystalline silicon photovoltaic module is mainly determined by the efficiency of silicon cells, but the performances of other components, such as the encapsulant, the front glass and the backsheet, also have an impact. Among these, the optical properties of the backsheet are critical in determining the performance of the photovoltaic module as higher reflectance of the inner side of the backsheet helps redirect more reflected light back to the photovoltaic cell. In addition to the optical properties of the backsheet, the durability of the backsheet should be taken into account due to its role in ensuring a module lifetime of 20–25 years. The backsheet protects the module and its components from external stresses and also acts as an electric insulator. In this study, we focused on the performance and degradation of different types of backsheets and how these impact the performance of the module. We investigate how the initial optical performance of the backsheet impacts the performance of the module. After degradation at 85 °C and 85% relative humidity over 4000 h, reflectance and module performance were correlated and compared with its initial performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Aging mechanism of polymeric films for PV encapsulation10.1016/j.solener.2005.02.008 ↗
2. Moisture transport, adhesion, and corrosion protection of PV module packaging materials10.1016/j.solmat.2006.04.003 ↗
3. Study on the degradation of different types of backsheets used in PV module under accelerated conditions10.1016/j.solmat.2013.09.036 ↗
4. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗
5. V.A. Kuznetsova, R.S. Gaston, S.J. Bury, S.R. Strand, Photovoltaic reliability model development and validation, in: Photovoltaic Specialists Conference (PVSC), 2009 34th IEEE IEEE, Philadelphia, PA, 2009.10.1109/PVSC.2009.5411648 ↗
6. J. Kapur, K. Proost, C.A. Smith, Determination of moisture ingress through various encapsulants in glass/glass laminates, in: Photovoltaic Specialists Conference (PVSC), 2009 34th IEEE IEEE, Philadelphia, PA, 2009.10.1109/PVSC.2009.5411235 ↗
7. Environmental aging and deadhesion of siloxane-polyimide-epoxy adhesive10.1109/TCAPT.2003.817642 ↗
8. Physical deterioration of encapsulation and electrical insulation properties of PV modules after long-term operation in Thailand10.1016/j.solmat.2010.03.038 ↗
9. Nondestructive estimation of strength deterioration in photovoltaic backsheets using a portable near infrared spectrometer10.1016/j.solmat.2012.01.017 ↗
10. Ultra-violet degradation behavior of polymeric backsheets for photovoltaic modules10.1016/j.solener.2014.06.027 ↗
11. L. Dunn, M. Gostein, B. Stueve, Literature Review of the Effects of UV Exposure on PV Modules, in: NREL PV Module Reliability Workshop, CO, USA, 2013.
12. UV degradation of the optical properties of acrylic for neutrino and dark matter experiments10.1088/1748-0221/4/09/T09001 ↗
13. S. Yang, K. Whitfield, E. Rhee, UV degradation study of encapsulate backsheet system for PV modules using metal halide lamp, in: NREL PV Module Reliability Workshop, CO, USA, 2014.
14. Development of highly flexible and ultra-low permeation rate thin-film barrier structure for organic electronics10.1016/j.tsf.2013.05.007 ↗
15. Experimental characterization and simulation of water vapor diffusion through various encapsulants used in PV modules10.1016/j.solmat.2013.04.007 ↗
16. The importance of optical characterization of PV backsheets in improving solar module power
17. S. Ponce-Alcántara, A. Vivas, G. Sanche, Optical characterization of backsheets to improve the power of photovoltaic modules, in: Proceedings of the 8th International Photovoltaic Power Generation Conference and Exhibition, Shanghai, China, 2014.
18. P.J. Sanchez-Illescas, P. Carpena, P. Bernaola-Galván, M. Piliougine Rocha, J.E. Carretero Rubio, M. Sidrach-de-Cardona, P. Sánchez-Friera, B. Lalaguna, Performance of photovoltaic modules with white reflective back sheets, In: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, Valencia, Spain, 2008, pp. 346–349.
19. Electrical characteristics of PV module according to optical characteristics of back-sheet
20. Ultra-violet degradation behavior of polymeric backsheets for photovoltaic modules10.1016/j.solener.2014.06.027 ↗
21. V.C. Gudla, S. Canulescu, V.E. Johansen, J. Schou, R. Ambat, Reflectance spectroscopy from TiO2 particles embedded in polyurethane, in: EUROCORR 2013, Estoril, Portugal, 2013.
22. A.A. Vivas Arangú, S. Ponce-Alcántara, G. Sánchez, Optical characterization of backsheets to improve the power of photovoltaic modules, in: Proceedings of the 8th International Photovoltaic Power Generation Conference and Exhibition, SNEC, Shanghai, China, 2014.
23. M. Temchenko, Currents trends in backsheet evolution, In: Proceedings of the 2nd Polymer Apps in PV Conference, Leipzig, German, 2012.
24. Impact of permeation properties and backsheet-encapsulant interactions on the reliability of PV modules
25. J. Jung, A study on the power conversion efficiency of silicon solar modules: Influence of Backsheet colo, in: Chemical Engineering, Chonbuk National University, Chonbuk, 2012.
26. Detection of degradation effects in field-aged c-Si solar cells through IR thermography and digital image processing10.1155/2012/396792 ↗
27. Failure modes evaluation of PV module via materials degradation approach10.1016/j.egypro.2013.05.066 ↗
28. K. Whitfield, Damp heat versus field reliability for crystalline silicon, in: Photovoltaic Specialists Conference, IEEE, TX, USA, 2012, pp. 001864–001870.10.1109/PVSC.2012.6317957 ↗
29. The degradation of multi-crystalline silicon solar cells after damp heat tests10.1016/j.microrel.2014.07.071 ↗
30. Origin of damp-heat induced cell degradation10.1016/j.solmat.2013.03.022 ↗
31. The degradation of multi-crystalline silicon solar cells after damp heat tests10.1016/j.microrel.2014.07.071 ↗
32. The effect of moisture on the degradation mechanism of multi-crystalline silicon photovoltaic module10.1016/j.microrel.2013.07.047 ↗
33. A comparison of degradation in three amorphous silicon PV module technologies10.1016/j.solmat.2009.12.009 ↗
34. P. Hacke, D.L. Meier, Analysis of fill factor losses using current–voltage curves obtained under dark and illuminated conditions, in: IEEE Photovoltaic Specialists Conference, IEEE, Louisiana, USA, 2002.10.1109/PVSC.2002.1190559 ↗
35. A. Norris, B. Ketola, Degradation mechanism investigation of extended damp heat aged PV modules, in: IEEE Photovoltaic Specialists Conference, IEEE, Washington, USA, 2011.