journal article·2011-01

Spray deposition of electrohydrodynamically atomized polymer mixture for active layer fabrication in organic photovoltaics

Sung-Eun Park, Jun-Young Hwang, Kangmin Kim, Buyoung Jung, Woochul Kim, Jungho Hwang

Publisher page

Abstract

Printing and spray technologies are the most recent and novel approaches to form organic photovoltaics (OPV) with inexpensive, high speed, and environmentally friendly process. With an electrohydrodynamic atomization (EHDA) approach, the active layer composed of polymer mixture (P3HT:PCBM) was successively fabricated. Operating conditions for obtaining the stable cone jet mode were determined with various applied voltages and liquid feed flow rates. The size distribution of EHDA droplets was characterized by aerodynamic particle sizer (APS) measurement. The mode diameters of the droplets were 580 and 670 nm, respectively, when the liquid flow rates were 1 and 20 μl/min. The maximum power conversion efficiency of 0.48% was obtained under AM 1.5 solar simulation for an OPV device fabricated in air.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Surface Modification and Superhydrophobicity · Electrowetting and Microfluidic Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
2. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
3. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
4. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
5. Topographical and morphological aspects of spray coated organic photovoltaics10.1016/j.orgel.2009.02.010 ↗
6. R. Green, A. Morfa, A.J. Ferguson, N. Kopidakis, G. Rumbles, S.E. Shaheen, Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition, Appl. Phys. Lett. 92 (2008) 1–3 (033301).10.1063/1.2836267 ↗
7. Generation of monodisperse droplets 0.3 to 4μm in diameter from electrified cone-jets of highly conducting and viscous liquids10.1016/0021-8502(94)90204-6 ↗
8. Controlled size polymer particle production via electrohydrodynamic atomization10.1016/j.colsurfa.2007.05.072 ↗
9. Charge reduced electrospray size spectrometry of mega- and gigadalton complexes: whole viruses and virus fragments10.1021/ac051571i ↗
10. Characterization of electrospraying process for polymeric particle fabrication10.1016/j.jaerosci.2008.07.003 ↗
11. Electrostatic spraying of liquids in cone jet mode10.1016/0304-3886(89)90081-8 ↗
12. Generation of monodisperse water droplets from electrosprays in a corona-assisted cone-jet mode10.1006/jcis.1995.1464 ↗
13. Monodisperse electrosprays of low electric conductivity liquids in the cone-jet mode10.1006/jcis.1996.0645 ↗
14. Structuring of micro line conductor using electro-hydrodynamic printing of a silver nanoparticle suspension10.1007/s00339-005-3452-5 ↗
15. D.Y. Lee, Y.S. Shin, S.E. Park, T.U. Yu, J. Hwang, Electrohydrodynamic printing of silver nanoparticles by using a focused nanocolloid jet, Appl. Phys. Lett. 90 (2007) 1–3 (081905)10.1063/1.2645078 ↗
16. Formation of ceramic nanoparticle patterns using electrohydrodynamic jet printing with pin-to-pin electrodes10.1143/JJAP.47.1723 ↗
17. Influence of electric field profile and polarity on the mode of EHDA related to electric discharge regimes10.1016/S0021-8502(98)00779-4 ↗
18. Electrostatic atomisation of a ceramic suspension10.1016/j.jeurceramsoc.2003.07.001 ↗
19. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
20. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
21. The origin of the open-circuit voltage in polyfluorene-based photovoltaic devices10.1063/1.1506385 ↗
22. P. Kumar, H. Kumar, S.C. Jain, P. Venkatesu, S. Chand, V. Kumar, Effect of active layer thickness on open circuit voltage in organics photovoltaic devices, Jpn. J. Appl. Phys. 48 (2009) 1–4 (121501)10.1143/JJAP.48.121501 ↗