Enhanced charge transport in low temperature carbon-based n-i-p perovskite solar cells with NiOx-CNT hole transport material
Source abstract
Abstract
Abstract We report oleylamine functionalized NiOx (f-NiOx) and CNT composite (f-NiOx + CNT) as hole transport material in n-i-p low-temperature processed carbon counter electrode based perovskite solar cells. Oleylamine functionalization improves the dispersibility of NiOx, but it reduces the conductivity. We demonstrate the addition of a small amount of CNT significantly enhances the conductivity and charge transport properties. The morphological and optoelectrical properties of prepared nanoparticles were evaluated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS) and UV–Vis spectroscopy. The results suggest suitable energy band alignment of f-NiOx+CNT hole transport material with FA0.83Cs0.17PbI2.5Br0.5 perovskite absorber layer. Better hole extraction and transport were provided by f-NiOx + CNT hole transport material, with improved conductivity of 2.73 × 10−2 S cm−1. The fabricated device exhibits 11.36% efficiency with exceptional stability for more than 720 h (retaining ~ 60% of initial efficiency) in ambient without encapsulation. Additionally, we have also demonstrated the perovskite mini-module by connecting two small area cells in series, making the active area of 4 cm2 with 6.11% efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells10.1126/science.abc4417 ↗
3. Role of spiro-OMeTAD in performance deterioration of perovskite solar cells at high temperature and reuse of the perovskite films to avoid Pb-waste10.1039/C7TA07674F ↗
4. Accelerated degradation due to weakened adhesion from Li-TFSI additives in perovskite solar cells10.1021/acsami.6b14089 ↗
5. Enhancement in lifespan of halide perovskite solar cells10.1039/C8EE02852D ↗
6. Achieving long-term stable perovskite solar cells via ion neutralization10.1039/C6EE00612D ↗
7. Effect of metal electrodes on aging-induced performance recovery in perovskite solar cells10.1021/acsami.9b14619 ↗
8. Inorganic hole‐transporting materials for perovskite solar cells10.1002/smtd.201700280 ↗
9. Review of current progress in inorganic hole-transport materials for perovskite solar cells10.1016/j.apmt.2018.12.011 ↗
10. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
11. Hole-conductor-free perovskite organic lead iodide heterojunction thin-film solar cells: high efficiency and junction property10.1063/1.4864638 ↗
12. Depletion region effect of highly efficient hole conductor free CH3NH3PbI3 perovskite solar cells10.1039/C4CP00460D ↗
13. A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA2PbI4 perovskite10.1039/C8TA09433K ↗
14. Full printable processed mesoscopic CH₃NH₃PbI₃/TiO₂ heterojunction solar cells with carbon counter electrode10.1038/srep03132 ↗
15. Effect of guanidinium on mesoscopic perovskite solar cells10.1039/C6TA08418D ↗
16. The effect of water in Carbon-Perovskite Solar Cells with optimized alumina spacer10.1016/j.solmat.2019.03.029 ↗
17. A contact study in hole conductor free perovskite solar cells with low temperature processed carbon electrodes10.1039/C7RA00066A ↗
18. Structure engineering of hole–conductor free perovskite-based solar cells with low-temperature-processed commercial carbon paste as cathode10.1021/am504175x ↗
19. Inkjet printing and instant chemical transformation of a CH3NH3PbI3/nanocarbon electrode and interface for planar perovskite solar cells10.1002/anie.201408638 ↗
20. Hole-conductor-free, metal-electrode-free TiO2/CH3NH3PbI3 heterojunction solar cells based on a low-temperature carbon electrode10.1021/jz5017069 ↗
21. Binder-solvent effects on low temperature-processed carbon-based, hole-transport layer free perovskite solar cells10.1016/j.matchemphys.2020.123594 ↗
22. Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor10.1039/C4EE00762J ↗
23. Minimizing non-radiative recombination losses in perovskite solar cells10.1038/s41578-019-0151-y ↗
24. Resolving a critical instability in perovskite solar cells by designing a scalable and printable carbon based electrode‐interface architecture10.1002/aenm.201802085 ↗
25. High-performance, stable and low-cost mesoscopic perovskite (CH3NH3PbI3) solar cells based on poly (3-hexylthiophene)-modified carbon nanotube cathodes10.1007/s12200-016-0566-7 ↗
26. Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering10.1016/j.jmst.2018.12.025 ↗
27. Paintable carbon‐based perovskite solar cells with engineered perovskite/carbon interface using carbon nanotubes dripping method10.1002/smll.201701225 ↗
28. Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode10.1016/j.nanoen.2015.11.034 ↗
29. Efficient and stable carbon-based perovskite solar cells enabled by the inorganic interface of CuSCN and carbon nanotubes10.1039/C9TA02014D ↗
30. Molecular versus polymeric hole transporting materials for perovskite solar cell application10.1039/C8TA03875A ↗
31. Ambipolar electrical transport in semiconducting single-wall carbon nanotubes10.1103/PhysRevLett.87.256805 ↗
32. Perovskite solar cells using carbon nanotubes both as cathode and as anode10.1021/acs.jpcc.7b10334 ↗
33. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%10.1126/science.aam5655 ↗
34. Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells10.1039/C7EE01675A ↗
35. Efficient CH3NH3PbI3 perovskite solar cells employing nanostructured p-type NiO electrode formed by a pulsed laser deposition10.1002/adma.201500523 ↗
36. Progress, highlights and perspectives on NiO in perovskite photovoltaics10.1039/D0SC02859B ↗
37. Air-stable n–i–p planar perovskite solar cells using nickel oxide nanocrystals as sole hole-transporting material10.1021/acsaem.9b00603 ↗
38. Perovskite solar cells using surface‐modified NiOx nanoparticles as hole transport materials in n‐i‐p configuration10.1002/solr.201900172 ↗
39. Efficient screen printed perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO/carbon architecture10.1016/j.nanoen.2015.08.009 ↗
40. Hole selective NiO contact for efficient perovskite solar cells with carbon electrode10.1021/nl504701y ↗
41. Post‐treatment‐free solution‐processed non‐stoichiometric NiOx nanoparticles for efficient hole‐transport layers of organic optoelectronic devices10.1002/adma.201405391 ↗
42. FTIR study of surfactant bonding to FePt nanoparticles10.1016/S0304-8853(03)00469-4 ↗
43. New interpretations of XPS spectra of nickel metal and oxides10.1016/j.susc.2006.01.041 ↗
44. Electronic band structure and carrier concentration of formamidinium-cesium mixed cation lead mixed halide hybrid perovskites10.1063/1.5016829 ↗
45. Synthesis of hollow NiO nanostructures and their application for supercapacitor electrode10.1007/s11581-018-2771-4 ↗
46. Improving the performance of formamidinium and cesium lead triiodide perovskite solar cells using lead thiocyanate additives10.1002/cssc.201601027 ↗
47. Electrostatic fabrication of oleylamine capped nickel oxide nanoparticles anchored multiwall carbon nanotube nanocomposite: a robust electrochemical determination of riboflavin at nanomolar levels10.1039/c3ay41810c ↗
48. Slow response of carrier dynamics in perovskite interface upon illumination10.1021/acsami.8b13932 ↗
49. A new method for fitting current–voltage curves of planar heterojunction perovskite solar cells10.1007/s40820-017-0159-z ↗
50. Improved stability of inverted and flexible perovskite solar cells with carbon electrode10.1021/acsaem.0c00702 ↗