journal article·2020-01

Novel acrylic monomers for organic photovoltaics encapsulation

Aleksandr Kovrov, Martin Helgesen, Christine Boeffel, Stefan Kröpke, Roar R. Søndergaard

Publisher page

Abstract

Abstract Cheap and efficient encapsulation methods are needed for successful commercialization of organic photovoltaics (OPV). Application of epoxy or acrylic UV-curable adhesives is a fast and scalable way to encapsulate organic solar cells. Despite lower barrier properties, acrylates have some benefits over epoxies such as higher cure speed, better adhesion to various substrates, lower viscosity and increased mechanical flexibility. In this work commercial and novel acrylic monomers were applied for encapsulation of OPV. It was found that monomers with phenyl ethyl ester group can have very high adhesion to polyethylene terephthalate (PET), good barrier properties and good compatibility with a layer stack of OPV devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Recent progress in high-mobility organic transistors: a reality check10.1002/adma.201801079 ↗
2. Liquid crystal display and organic light-emitting diode display: present status and future perspectives10.1038/lsa.2017.168 ↗
3. Organic photovoltaics: focus on its strengths10.1016/j.joule.2017.12.011 ↗
4. Burn-in free nonfullerene-based organic solar cells10.1002/aenm.201700770 ↗
5. Novel copolymers based tetrafluorobenzene and difluorobenzothiadiazole for organic solar cells with prominent open circuit voltage and stability10.1002/marc.201600556 ↗
6. Organic solar cells of enhanced efficiency and stability using zinc oxide:zinc tungstate nanocomposite as electron extraction layer
7. All solution and ambient processable organic photovoltaic modules fabricated by slot-die coating and achieved a certified 7.56 % power conversion efficiency10.1016/j.solmat.2019.110064 ↗
8. Over 2 Years of outdoor operational and storage stability of ITO-free, fully roll-to-roll fabricated polymer solar cell modules10.1002/ente.201500086 ↗
9. Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes10.1039/C4EE02582B ↗
10. Flexible encapsulation for organic solar cells10.1117/12.662829 ↗
11. Adhesives for organic photovoltaic packaging
12. Comparison of UV-curing, hotmelt, and pressure sensitive adhesive as roll-to-roll encapsulation methods for polymer solar cells10.1002/adem.201300172 ↗
13. Contact allergy to epoxy resin: risk occupations and consequences10.1111/j.1600-0536.2012.02072.x ↗
14. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
15. All printed transparent electrodes through an electrical switching mechanism: a convincing alternative to indium-tin-oxide, silver and vacuum10.1039/c2ee23244h ↗
16. Shrinkage measurements of UV-curable adhesives10.1002/opph.201700026 ↗
17. The formulator's guide to anti-oxygen inhibition additives10.1016/j.porgcoat.2014.06.005 ↗
18. Definition of encapsulation barrier requirements: a method applied to organic solar cells10.1016/j.solmat.2011.01.035 ↗