Enhanced electron transport enables over 12% efficiency by interface engineering of non-fullerene organic solar cells
Source abstract
Abstract
Abstract Organic solar cells have attracted much attention in the recent years due to their many intrinsic advantages, such as, light weight, flexibility, low-cost, solution processing, and facile device fabrication. In this study, effective interface engineering was employed to improve all the photovoltaic parameters of an organic solar cell simultaneously by incorporating ZnO nanoparticle (ZnO-NP) interlayer in between the indium tin oxide cathode and sol-gel processed ZnO electron transport layer. The significance of incorporating a ZnO-NP/ZnO bilayer as the electron transport layer in the bulk heterojunction organic solar cells was demonstrated via systematic study, employing a high efficiency photoactive layer system (PBDB-T:ITIC). The bilayer electron transport layer demonstrated reduced work function compared to the sol-gel ZnO, which enabled effective electron transfer from the active layer to the electron transport layer. In addition, improved bilayer surface morphology, via reduction of ZnO-NP layer roughness, and better crystallinity compared to sol-gel ZnO facilitated charge separation and transmission between electron transport layer and active layer. Consequently, the devices with bilayer interlayer exhibited an enhancement of > 13% in power conversion efficiency compared to the control devices with sol-gel only ZnO as electron transport layer. The mechanisms behind the improvement in device performance were analysed using the ultraviolet and X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The champion bilayer device exhibited 12.24% efficiency which is much higher than the efficiency of 10.69% for the control device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. Organic tandem solar cells: a review10.1039/b817952b ↗
4. Photo-degradation of high efficiency fullerene-free polymer solar cells10.1039/C7NR06151J ↗
5. Visibly-transparent organic solar cells on flexible substrates with all-graphene electrodes10.1002/aenm.201600847 ↗
6. Efficient large area semitransparent organic solar cells based on highly transparent and conductive ZTO/Ag/ZTO multilayer top electrodes10.1016/j.orgel.2011.06.015 ↗
7. High-efficiency semitransparent organic solar cells with non-fullerene acceptor for window application10.1021/acsphotonics.7b00618 ↗
8. Flexible organic solar cells including efficiency enhancing grating structures10.1088/0957-4484/24/14/145301 ↗
9. Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems10.1039/C5TA07357J ↗
10. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
11. Highly flexible and lightweight organic solar cells on biocompatible silk fibroin10.1021/am504163r ↗
12. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
13. Green chemistry for organic solar cells10.1039/c3ee41096j ↗
14. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
15. Roll to roll compatible fabrication of inverted organic solar cells with a self-organized charge selective cathode interfacial layer10.1039/C6TA00391E ↗
16. Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture10.1039/C4EE01222D ↗
17. Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability10.1002/adma.201600281 ↗
18. Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization10.1007/s11426-016-0198-0 ↗
19. 11% efficient ternary organic solar cells with high composition tolerance via integrated near-IR sensitization and interface engineering10.1002/adma.201602834 ↗
20. Highly efficient fullerene-free polymer solar cells fabricated with polythiophene derivative10.1002/adma.201601803 ↗
21. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
22. Rylene and related diimides for organic electronics10.1002/adma.201001402 ↗
23. Organic non-fullerene acceptors for organic photovoltaics10.1039/c0ee00668h ↗
24. A non-fullerene acceptor with a fully fused backbone for efficient polymer solar cells with a high open-circuit voltage10.1039/C6TA07368A ↗
25. Effect of alkyl side chains of conjugated polymer donors on the device performance of non-fullerene solar cells10.1021/acs.macromol.6b01326 ↗
26. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
27. Boosted electron transport and enlarged built-in potential by eliminating the interface barrier in organic solar cells10.1021/acsami.6b15631 ↗
28. Efficient all polymer solar cells from layer-evolved processing of a bilayer inverted structure10.1039/C3TC31945H ↗
29. Enhanced diode characteristics of organic solar cells using titanium suboxide electron transport layer10.1063/1.3409116 ↗
30. Assessing the origin of the S-shaped I–V curve in organic solar cells: an improved equivalent circuit model10.1016/j.solmat.2013.11.018 ↗
31. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
32. An organic surface modifier to produce a high work function transparent electrode for high performance polymer solar cells10.1002/adma.201404172 ↗
33. Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics10.1038/srep10569 ↗
34. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
35. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
36. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
37. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
38. Airbrush spray-coating of polymer bulk-heterojunction solar cells10.1016/j.solmat.2011.01.047 ↗
39. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
40. High performance semitransparent organic solar cells with 5% PCE using non-patterned MoO3/Ag/MoO3 anode10.1016/j.cap.2016.12.010 ↗
41. Efficient inverted bulk-heterojunction solar cells from low-temperature processing of amorphous ZnO buffer layers10.1039/C4TA02276A ↗
42. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
43. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
44. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
45. High efficiency PTB7-based inverted organic photovoltaics on nano-ridged and planar zinc oxide electron transport layers10.1039/C5TA00400D ↗
46. Simultaneous improvements in power conversion efficiency and operational stability of polymer solar cells by interfacial engineering10.1039/c3cp53352b ↗
47. Solution processed lithium doped ZnO electron transport layer for efficient triple cation (Rb, MA, FA) perovskite solar cells10.1021/acsami.7b09153 ↗
48. Low temperature processed ZnO thin film as electron transport layer for efficient perovskite solar cells10.1016/j.solmat.2016.09.014 ↗
49. Optimisation of the sol–gel derived ZnO buffer layer for inverted structure bulk heterojunction organic solar cells using a low band gap polymer10.1016/j.tsf.2014.07.026 ↗
50. Enhancing the stability of polymer solar cells by improving the conductivity of the nanostructured MoO3 hole-transport layer10.1039/c3cp50994j ↗
51. Double-layered ZnO nanostructures for efficient perovskite solar cells10.1039/C4NR04383A ↗
52. Nanoscale structure–property relationships in low-temperature solution-processed electron transport layers for organic photovoltaics10.1021/acs.cgd.7b01222 ↗
53. Optical modelling of P3HT:PC71BM semi-transparent organic solar cell10.1007/s11082-016-0866-6 ↗
54. Analysis of burn-in photo degradation in low bandgap polymer PTB7 using photothermal deflection spectroscopy10.1039/C6RA23288D ↗
55. Effect of annealing dependent blend morphology and dielectric properties on the performance and stability of non-fullerene organic solar cells10.1016/j.solmat.2017.11.027 ↗
56. Stable and efficient quantum-dot light-emitting diodes based on solution-processed multilayer structures10.1038/nphoton.2011.171 ↗
57. Optimisation of the sol–gel derived ZnO buffer layer for inverted structure bulk heterojunction organic solar cells using a low band gap polymer10.1016/j.tsf.2014.07.026 ↗
58. Charge transport through electrospun SnO2 nanoflowers and nanofibers: role of surface trap density on electron transport dynamics10.1021/jp304876j ↗
59. High performance dye-sensitized solar cells with record open circuit voltage using tin oxide nanoflowers developed by electrospinning10.1039/C1EE02703D ↗
60. Achieving a high fill factor for organic solar cells10.1039/C6TA00126B ↗
61. A molecular nematic liquid crystalline material for high-performance organic photovoltaics10.1038/ncomms7013 ↗
62. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
63. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
64. Efficient and 1,8-diiodooctane-free ternary organic solar cells fabricated via nanoscale morphology tuning using small-molecule dye additive10.1007/s12274-017-1589-0 ↗
65. Efficient organic photovoltaics with improved charge extraction and high short-circuit current10.1021/acs.jpcc.7b01314 ↗
66. Erroneous efficiency reports harm organic solar cell research10.1038/nphoton.2014.210 ↗
67. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte10.1038/nphoton.2015.126 ↗
68. Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell
69. Light-induced space-charge accumulation zone as photovoltaic mechanism in perovskite solar cells10.1021/acs.jpclett.5b02810 ↗
70. Electronic properties of meso-superstructured and planar organometal halide perovskite films: charge trapping, photodoping, and carrier mobility10.1021/nn502115k ↗
71. Electro-optical study of subphthalocyanine in a bilayer organic solar cell10.1002/adfm.200700398 ↗
72. Interface modification of ZnO-based inverted PTB7:PC71BM organic solar cells by cesium stearate and simultaneous enhancement of device parameters10.1021/sc5001447 ↗
73. Enhanced performance of inverted polymer solar cells by combining ZnO nanoparticles and poly[(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyfluorene)] as electron transport layer10.1021/acsami.5b11140 ↗
74. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗
75. Enhanced photovoltaic performance of inverted polymer solar cells by tuning the structures of titanium dioxide10.1016/j.tsf.2013.07.041 ↗
76. Toward high performance inverted polymer solar cells10.1016/j.polymer.2012.09.023 ↗
77. Optimization of the zinc oxide electron transport layer in P3HT: PC61BM based organic solar cells by annealing and yttrium doping10.1039/C5RA05258K ↗
78. Surface composition, work function, and electrochemical characteristics of gallium-doped zinc oxide10.1016/j.tsf.2012.04.038 ↗
79. Amphiphilic fullerene/ZnO hybrids as cathode buffer layers to improve charge selectivity of inverted polymer solar cells10.1039/C5NR01456E ↗
80. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
81. Evaluation of titanium silicon nitride as gate electrodes for complementary metal-oxide semiconductor10.1063/1.2188380 ↗
82. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
83. Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate10.1002/adfm.200700051 ↗
84. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes10.1063/1.3522893 ↗
85. Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure10.1039/c2cp42448g ↗
86. Cesium compounds as interface modifiers for stable and efficient perovskite solar cells10.1016/j.solmat.2017.08.032 ↗
87. ITIC surface modification to achieve synergistic electron transport layer enhancement for planar-type perovskite solar cells with efficiency exceeding 20%10.1039/C7TA01636K ↗
88. Simultaneous enhancement in stability and efficiency of low-temperature processed perovskite solar cells10.1039/C6RA14186B ↗
89. Role of ZnO electron-selective layers in regular and inverted bulk heterojunction solar cells10.1021/jz200045x ↗
90. Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopy10.1016/j.orgel.2008.06.007 ↗
91. Understanding charge transport and recombination losses in high performance polymer solar cells with non-fullerene acceptors10.1039/C7TA05865A ↗
92. Monitoring degradation mechanisms in PTB7: PC71BM photovoltaic cells by means of impedance spectroscopy10.1016/j.solmat.2015.09.050 ↗
93. Impedance spectroscopy analysis of small molecule solution processed organic solar cell10.1016/j.solmat.2014.05.050 ↗
94. Influences of dopant concentration in sol–gel derived azo layer on the performance of P3HT:PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
95. High performance and high stability low temperature aqueous solution-derived Li-Zr co-doped ZnO thin film transistors10.1039/c2jm15526e ↗
96. Ferromagnetism in Li doped ZnO nanoparticles: the role of interstitial Li10.1063/1.4767364 ↗
97. Switch ‘on’ and ‘off’ ferromagnetic ordering through the induction and removal of oxygen vacancies and carriers in doped ZnO: a magnetization and electronic structure study10.1002/pssa.200925637 ↗
98. Enhancement of inverted polymer solar cells performances using cetyltrimethylammonium-bromide modified ZnO10.3390/ma11030378 ↗
99. Zinc oxide as a model transparent conducting oxide: a theoretical and experimental study of the impact of hydroxylation, vacancies, interstitials, and extrinsic doping on the electronic properties of the polar ZnO (0002) surface10.1021/cm301596x ↗