Rapid fabrication of antireflective pyramid structure on polystyrene film used as protective layer of solar cell
Source abstract
Abstract
Abstract A promising strategy is proposed for facilely and successively replicating randomly arranged pyramids on an etched silicon wafer to polystyrene (PS) surface. First, a nickel mold insert with negative pyramids is fabricated via combining electroless plating and subsequent electroplating with an etched silicon wafer as a template. Then, by using microinjection compression molding with the nickel mold insert as a template, the pyramids on the insert are accurately transcribed to the PS surface. The pyramids on the PS replica surface have the hemlines of about 1–7 µm and heights of about 1–4 µm. The PS replica surface exhibits a reflectance of about 5% in the wavelength range of 400–900 nm and an enhanced transmittance. That is, it exhibits an enhanced light trapping effect, which originates from a combination of staggered arrangement and dense distribution of the pyramids with arc-shaped top and different sizes. Especially, a thin film solar cell covered with the PS replica exhibits increased power conversion efficiency enhancement of up to 7.9% under normal incidence comparing to that covered with the PS counterpart. The solar cell covered with the PS replica also shows an excellent photovoltaic performance over a wide range of incident angles (0–70°). The proposed fast and efficient replication strategy can be an excellent candidate for developing antireflective protective layers without complicated procedures and expensive materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Materials and Mechanics · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Texture profile and aspect ratio influence on the front reflectance of solar cells10.1063/1.2402348 ↗
2. Antireflective surfaces based on biomimetic nanopillared arrays10.1016/j.nantod.2010.03.001 ↗
3. Improvement on surface texturing of single crystalline silicon for solar cells by saw-damage etching using an acidic solution10.1016/j.solmat.2009.06.012 ↗
4. The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices10.1039/c0nr00594k ↗
5. Fabrication of silicon nanowire arrays by near-field laser ablation and metal-assisted chemical etching10.1088/0957-4484/27/7/075301 ↗
6. Flexible teflon nanocone array surfaces with tunable superhydrophobicity for self-cleaning and aqueous droplet patterning
7. Optimization of KOH etching process to obtain textured substrates suitable for heterojunction solar cells fabricated by HWCVD10.1016/j.tsf.2009.01.024 ↗
8. A simple and cost-effective approach for fabricating pyramids on crystalline silicon wafers10.1016/j.solmat.2009.01.018 ↗
9. The effect of texture unit shape on silicon surface on the absorption properties10.1016/j.solmat.2009.09.011 ↗
10. Rapid fabrication of microstructure on PMMA substrate by the plate to plate transition-spanning isothermal hot embossing method nearby glass transition temperature10.1002/pen.24408 ↗
11. Metal-particle-induced, highly localized site-specific etching of Si and formation of single-crystalline Si nanowires in aqueous fluoride solution10.1002/chem.200600032 ↗
12. Excellent antireflection properties of vertical silicon nanowire arrays10.1016/j.solmat.2010.02.033 ↗
13. Microlens array induced light absorption enhancement in polymer solar cells10.1039/c3cp50297j ↗
14. Design, fabrication, and testing of a Shack-Hartmann sensor with an automatic registration feature10.1364/AO.55.007892 ↗
15. Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
16. Very high efficiency silicon solar cells-science and technology10.1109/16.791982 ↗
17. Optical enhancement and losses of pyramid textured thin-film silicon solar cells10.1063/1.3602092 ↗
18. J. Kapur, K. Proost, C.A. Smith, Determination of moisture ingress through various encapsulants in glass/glass laminates, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, 2009, pp. 001210–001214.10.1109/PVSC.2009.5411235 ↗
19. Reversibly erasable nanoporous anti-reflection coatings from polyelectrolyte multilayers10.1038/nmat719 ↗
20. Luminescent downshifting by photo-induced sol-gel hybrid coatings: accessing multifunctionality on flexible organic photovoltaics via ambient temperature material processing10.1002/aelm.201600288 ↗
21. Floating, flexible dye-sensitized solar-cell architecture: the way of near-future photovoltaics
22. Solar power generation enhancement of dye-sensitized solar cells using hydrophobic and antireflective polymers with nanoholes10.1039/C5RA10269C ↗
23. Multifunctional microstructured polymer films for boosting solar power generation of silicon-based photovoltaic modules
24. Fabrication of highly transparent self-cleaning protection films for photovoltaic systems10.1002/pip.2203 ↗
25. Water-repellent perovskite solar cell10.1039/C4TA05413J ↗
26. Light management in perovskite solar cells and organic LEDs with microlens arrays10.1364/OE.25.010704 ↗
27. Paper-based quasi-solid dye-sensitized solar cells10.1016/j.electacta.2017.03.211 ↗
28. Exploration on polypropylene carbonate polymer for gel polymer electrolyte preparation and dye-sensitized solar cell application10.1002/app.45091 ↗
29. Fabrication of anti-reflection structure on protective layer of solar cells by hot-embossing method10.1016/j.solmat.2009.01.002 ↗
30. High fidelity transfer of nanometric random textures by UV embossing for thin film solar cells applications10.1016/j.solmat.2010.11.010 ↗
31. Fabrication of functional nanosized patterns with UV-curable polysilsesquioxane on photovoltaic protective glass substrates using hybrid nano-imprint lithography10.1039/C4TC00101J ↗
32. Nanosized patterned protective glass exhibiting high transmittance and self-cleaning effects for photovoltaic systems10.1002/pssa.201330643 ↗
33. Efficiency improvement of solar cells by importing microdome-shaped anti-reflective structures as a surface protection layer10.1016/j.mee.2010.12.118 ↗
34. Fabrication of antireflection structures as a protective layer of solar cells with nanoporous silica films and nanoimprinted moth-eye structure10.12693/APhysPolA.120.A-47 ↗
35. Control of bubble defects in UV nanoimprint10.1143/JJAP.46.6391 ↗
36. Micro air bubble formation and its control during polymerase chain reaction (PCR) in polydimethylsiloxane (PDMS) microreactors10.1088/0960-1317/17/10/018 ↗
37. Multi-height structures in injection molded polymer10.1016/j.mee.2015.03.017 ↗
38. Tuning 3D topography on biomimetic surface for efficient self-cleaning and microfluidic manipulation10.1088/0960-1317/25/3/035001 ↗
39. Rapid fabrication of T-shaped micropillars on polypropylene surfaces with robust Cassie-Baxter state for quantitative droplet collection10.1021/acs.jpcc.5b10079 ↗
40. Fabrication of nanopillar arrays by combining electroforming and injection molding10.1007/s00170-015-8260-2 ↗
41. The influence of structure heights and opening angles of micro- and nanocones on the macroscopic surface wetting properties10.1038/srep21400 ↗
42. Curved hierarchically micro-micro structured polypropylene surfaces by injection molding10.1088/1361-6439/27/1/015025 ↗
43. Modification of polycarbonate surface properties by nano-, micro-, and hierarchical micro-nanostructuring10.1016/j.apsusc.2009.06.073 ↗
44. Rapid replication and facile modulation of subwavelength antireflective polymer film using injection nanomolding and optical property of multilayer coatings10.1186/1556-276X-8-407 ↗
45. Injection moulding antireflective nanostructures10.1016/j.mee.2014.03.027 ↗
46. Injection molding and injection compression molding of thin-walled light-guided plates with V-grooved microfeatures10.1002/app.33603 ↗
47. Conductive nickel/carbon fiber composites prepared via an electroless plating route10.1007/s10854-016-4479-4 ↗
48. Effect of technology parameters on microstructure and properties of electroforming nickel layer
49. Poiseuille/squeeze flow-induced crystallization in microinjection-compression molded isotactic polypropylene10.1002/polb.23218 ↗
50. Replication of micro and nano surface geometries10.1016/j.cirp.2011.05.008 ↗
51. Minimizing light reflection from dielectric textured surfaces10.1364/JOSAA.28.000770 ↗
52. Microstructured surface design for omnidirectional antireflection coatings on solar cells10.1063/1.2817470 ↗