Electrochemically deposited Cu2O thin films on thermally oxidized Cu2O sheets for solar cell applications
Source abstract
Abstract
Abstract This paper deals with homoepitaxial growth of Cu 2 O thin films using the electrochemical deposition (ECD) method. It also discusses the photovoltaic properties of solar cells that use the active layer of p-type Cu 2 O thin film prepared by epitaxial growth. Such a film was formed at 70 °C on a degenerated p-type Cu 2 O:Na (p + -type Cu 2 O: Na) substrate, and this film produced on a substrate with a (110) plane orientation was oriented only in the (110) plane. The crystallite size of the produced Cu 2 O thin film (58.8 nm) was larger than that of the film produced on FTO (SnO 2 : F) (14.6 nm). A photoelectric conversion efficiency of 2.36% was achieved for the AZO/p-type Cu 2 O thin film/p + -type Cu 2 O:Na heterojunction solar cell in which a degenerated Al-doped ZnO (AZO) thin film was prepared as the transparent electrode layer on the Cu 2 O thin film by pulse laser deposition. Furthermore, photoelectric conversion efficiency of 4.41% was achieved for the AZO/n-type Ga 0.975 Al 0.025 O/p-type Cu 2 O/p + -type Cu 2 O:Na heterojunction solar cell with n-type Ga 0.975 Al 0.025 O film inserted between the AZO and p-type Cu 2 O thin film. This clearly shows that the Cu 2 O thin film produced by epitaxial growth on a p + -type Cu 2 O:Na (p + -type Cu 2 O: Na) substrate is superior as an active layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Explanation for low-efficiency Cu2O Schottky-barrier solar cells10.1063/1.90593 ↗
2. Preparation, characteristics and photovoltaic properties of cuprous oxide-a review10.1016/0038-1101(86)90191-7 ↗
3. Experimental and theoretical studies of Cu2O soler cell10.1016/0379-6787(82)90050-3 ↗
4. Cuprous oxide–indium–tin oxide thin film photovoltaic cells10.1063/1.332427 ↗
5. Indium tin oxide/Cu2O photovoltaic cells10.1016/0040-6090(83)90447-9 ↗
6. High-Efficiency oxide heterojunction solar cells using Cu2O sheets10.1143/JJAP.43.L917 ↗
7. Heterojunction solar cell with 2% efficiency based on a Cu2O substrate10.1063/1.2194315 ↗
8. Electrochemically constructed p-Cu2O/n-ZnO heterojunction diode for photovoltaic device10.1088/0022-3727/40/11/010 ↗
9. Fabrication and characterization of ZnO/Cu2O solar cells prepared by electrodeposition10.7567/APEX.6.086503 ↗
10. High-efficiency oxide solar cells with ZnO/Cu2O heterojunction fabricated on thermally oxidized Cu2O sheets10.1143/APEX.4.062301 ↗
11. Y. Nishi, T. Miyata, J. Nomoto, T. Minami, High-efficiency Cu2O-based heterojunction solar cells fabricated on thermally oxidized copper sheets, in: Proceedings of the Conference Record of 37th IEEE Photovoltaic Specialists Conference, 2011, 266–27010.1109/PVSC.2011.6185896 ↗
12. Influence of Cu2O surface treatment on the photovoltaic properties of Al-doped ZnO/Cu2O solar cells10.1016/j.tsf.2011.08.032 ↗
13. Effect of inserting a thin buffer layer on the efficiency in n-ZnO/p-Cu2O heterojunction solar cells10.1116/1.3698596 ↗
14. The impact of heterojunction formation temperature on obtainable conversion efficiency in n-ZnO/p-Cu2O solar cells10.1016/j.tsf.2012.09.090 ↗
15. High-Efficiency Cu2O-based heterojunction solar cells fabricated using a Ga2O3 thin film as N-type layer10.7567/APEX.6.044101 ↗
16. Ultrathin amorphous zinc-tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells10.1039/c3ee24461j ↗
17. Atomic layer deposited gallium oxide buffer layer enables 1.2 V open-circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
18. Efficiency improvement of Cu2O-based heterojunction solar cells fabricated using thermally oxidized copper sheets10.1016/j.tsf.2013.11.026 ↗
19. Epitaxial growth of high mobility Cu2O thin films and application to p-channel thin film transistor10.1063/1.3026539 ↗
20. Impact of incorporating sodium into polycrystalline p-type Cu2O for heterojunction solar cell applications10.1063/1.4902879 ↗
21. T. Miyata, T. Minami, H. Tanaka, H. Sato, Effect of a buffer layer on the photovoltaic properties of AZO/Cu2O solar cells, in: Proceedings of the SPIE, “Device Process. Technol. Microelectron., MEMS, Photon- IV”, 6037, 2006, 60371210.1117/12.638649 ↗
22. Junction studies on electrochemically fabricated p–n Cu2O homojunction solar cells for efficiency enhancement10.1039/c2cp40502d ↗
23. Relationship between the electrical properties of the n-oxide and p-Cu2O layers and the photovoltaic properties of Cu2O-based heterojunction solar cells10.1016/j.solmat.2015.11.033 ↗
24. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium–oxide thin film and p-type sodium-doped Cu2O sheet10.7567/APEX.8.022301 ↗