Influence of poly3-octylthiophene (P3OT) film thickness and preparation method on photovoltaic performance of hybrid ITO/CdS/P3OT/Au solar cells
Source abstract
Abstract
Abstract Chemically synthesized poly3-octylthiophene (P3OT) solution was spin-coated (SC) or drop-cast (DC) on cadmium sulfide thin film to form a hybrid junction of transparent conductive glass (indium-tin oxide (ITO))/CdS/P3OT/Au. XRD patterns of DC P3OT films show a couple of peaks at 2 θ between 8° and 13°. It suggests that a long-range order may exist in the slowly dried DC P3OT films. Optical absorption coefficient spectra of P3OT films exhibit the presence of polaron bands in P3OT films with thickness lower than 700 nm, which indicates that thin P3OT films are susceptible to oxygen doping. The microscopically more ordered DC P3OT films show a coplanar photoconductivity, which was absent in the SC P3OT ones. The effect of P3OT film preparation method and ambient conditions was also notable on the photovoltaic performance of CdS/P3OT-based solar cells. The potential barrier of the CdS/P3OT heterojunctions decreased as the P3OT film thickness reduced from 671 to 106 nm, which was related to the diffusion of oxygen into the polymer film. As the P3OT film thickness increased to more than 1000 nm, the open-circuit voltage ( V OC ) reached to around 1 V, close to the value suggested by fitting the current–voltage curves with the Schottky barrier diode model. But at the same time, the short-circuit current density ( J SC ) of the same cells is lowered due to the increasing charge recombination effect inside the polymer material. The simple and economic drop-cast preparation method is promising for polymer film deposition in hybrid solar cell fabrication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Numerical simulations of layered and blended organic photovoltaic cells10.1063/1.1901812 ↗
2. Hybrid solar cells10.1016/j.ica.2007.06.042 ↗
3. Charge transfer in photovoltaics consisting of interpenetrating networks of conjugated polymer and TiO2 nanoparticles10.1063/1.123659 ↗
4. Charge transport in TiO2/MEH-PPV polymer photovoltaics10.1103/PhysRevB.64.125205 ↗
5. The effect of polymer optoelectronic properties on the performance of multilayer hybrid polymer/TiO2 solar cells10.1002/adfm.200400165 ↗
6. Fabrication of double layered hybrid solar cells consisting of low-temperature anatase titanium oxide and conducting polymer10.1143/JJAP.47.509 ↗
7. Influence of polymer ionization potential on the open-circuit voltage of hybrid polymer/TiO2 solar cells10.1063/1.2840608 ↗
8. Exciton splitting and carrier transport across the amorphous-silicon/polymer solar cell interface10.1063/1.2408641 ↗
9. Solid-state organic/inorganic hybrid solar cells based on conjugated polymers and dye-sensitized TiO2 electrodes10.1016/S0040-6090(01)01580-2 ↗
10. Improvement of charge injection efficiency in organic–inorganic hybrid solar cells by chemical modification of metal oxides with organic molecules10.1063/1.2736192 ↗
11. Analysis of electrical parameters in heterojunctions based on poly-3-octylthiophene and cadmium sulfide thin films10.1016/j.solmat.2006.03.015 ↗
12. Photovoltaic devices based on electrochemical–chemical deposited CdS and poly3-octylthiophene thin films10.1016/j.solmat.2008.03.011 ↗
13. The effects of H2O and O2 on the photocurrent spectra of MEH-PPV10.1016/S0379-6779(98)00789-9 ↗
14. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly(3-alkylthiophenes)10.1021/ja964229j ↗
15. Semiconductor thin films by chemical bath deposition for solar energy related applications10.1016/S0927-0248(97)00237-7 ↗
16. Synthesis of derivatives of polythiophene and their application in an electrochromic device10.1016/j.solmat.2004.01.009 ↗
17. Physicochemical and morphological properties of spin-coated poly(3-alkylthiophene) thin films10.1016/j.solmat.2008.02.016 ↗
18. Optical and morphological properties of chemically synthesized poly3-octylthiophene thin films10.1016/j.tsf.2005.04.059 ↗
19. Improved efficiency of photovoltaics based on CdSe nanorods and poly(3-hexylthiophene) nanofibers10.1039/b604734n ↗
20. Aggregation and gelation effects on the performance of poly(3-hexylthiophene)/fullerene solar cells10.1021/ma801368z ↗
21. Control of the nanoscale crystallinity and phase separation in polymer solar cells10.1063/1.2891884 ↗
22. Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system10.1016/j.solmat.2007.04.001 ↗
23. Schroder · 1998
24. Shur · 1990