Crack detection in photovoltaic cells by interferometric analysis of electronic speckle patterns
Source abstract
Abstract
Cracking is a common problem encountered during the fabrication of crystalline silicon photovoltaic (PV) cells. In this study, electronic speckle pattern interferometry (ESPI) is developed as a tool for rapid identification of cracks in PV cells. Thermally induced cell deformation of defect-free and defect-bearing PV cells was first modeled with numerical simulations and then experimentally studied by optical configuration for ESPI measurement of out-of-plane deformations. Both numerical and experimental results indicate that the speckle patterns imparted during thermal deformation of a cell allow for simultaneous quantification of crack size, location and type in both single- and poly-crystalline PV cells. Speckle patterns near defects were manifested as continuous, chevron-shaped, and broken fringes for scratch, surface cracks, and through cracks, respectively. For comparison to other existing techniques, full field electroluminescent images were also provided for every defective PV cell. Electroluminescent imaging is capable of detecting cracks, but unlike ESPI, is unable to distinguish between the different types of cracks. Because the amount of heating needed to induce out-of-plane deformation resolvable by ESPI is small (<0.5 °C) and because ESPI is sensitive to crack type, the ESPI-based imaging study presented here can potentially be developed into a rapid, non-destructive inspection tool for the structural integrity of solar cells at any point within the manufacturing process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Flexible silicon solar cells10.1016/j.solmat.2009.03.016 ↗
2. Dynamic fracture in single crystal silicon10.1103/PhysRevLett.82.3823 ↗
3. Fracture toughness of eutectic Al–Si casting alloy with different microstructural features10.1007/BF00354438 ↗
4. Fracture toughness and subcritical crack growth in polycrystalline silicon10.1115/1.2172268 ↗
5. Bow in screen-printed back-contact industrial silicon solar cells10.1016/j.solmat.2007.04.010 ↗
6. Photographic surveying of minority carrier diffusion length in polycrystalline silicon solar cells by electroluminescence10.1063/1.1978979 ↗
7. Diffusion lengths of silicon solar cells from luminescence images10.1063/1.2749201 ↗
8. Photoluminescence imaging of silicon wafers10.1063/1.2234747 ↗
9. Comparison of luminescence imaging and illuminated lock-in thermography on silicon solar cells10.1063/1.2399346 ↗
10. Shunts due to laser scribing of solar cells evaluated by highly sensitive lock-in thermography10.1016/S0927-0248(00)00077-5 ↗
11. Resonance ultrasonic vibrations for crack detection in photovoltaic silicon wafers10.1088/0957-0233/18/3/038 ↗
12. Thermomechanical deformation imaging of power devices by electronic speckle pattern interferometry (ESPI)10.1016/S0026-2714(98)00079-1 ↗
13. Electronic speckle pattern interferometry deformation measurement on lightweight structures under thermal load10.1016/S0143-8166(99)00015-9 ↗
14. Defect detection in metals using electronic speckle pattern interferometry10.1016/j.solmat.2004.03.009 ↗
15. Fracture mechanics of thin plates and shells under combined membrane, bending and twisting loads10.1115/1.1828049 ↗
16. Microstructure and mechanical properties of aluminum back contact layers10.1016/j.solmat.2010.04.037 ↗
17. What is the Young's modulus of silicon?10.1109/JMEMS.2009.2039697 ↗
18. Techniques for measuring thermal expansion and creep of polysilicon10.1016/j.sna.2003.12.010 ↗
19. Sirohi · 1997