journal article·2011-08

Indium-free, acid-resistant anatase Nb-doped TiO2 electrodes activated by rapid-thermal annealing for cost-effective organic photovoltaics

Jun-Hyuk Park, Seong Jun Kang, Seok-In Na, Hyun Hwi Lee, Sung-Wng Kim, H. Hosono, Han-Ki Kim

Publisher page

Abstract

Abstract Indium-free and acid-resistant anatase Nb-doped TiO 2 (NTO) electrodes are promising as economical substitutes for high-cost Sn-doped In 2 O 3 (ITO) films used in organic photovoltaics. By rapid-thermal annealing under an ambient vacuum, an insulating amorphous NTO film of low transparency was changed dramatically into a transparent and conductive anatase NTO electrode. Metallic conductivity of the annealed NTO electrode could be attributed to formation of the anatase phase and activation of the Nb dopant. Based on synchrotron X-ray scattering and high-resolution transmission electron microscopy, the electrical properties of the NTO electrode could be correlated with the microstructure of the NTO film. The acid-stability of NTO film also supports its use as a substitute for ITO electrode. Unlike Ga:ZnO and Al:ZnO films, which were easily etched by acidic PEDOT:PSS solution, the NTO film was stable against this reagent. Importantly, the annealing temperature influenced the performance of the organic solar cell fabricated with the NTO electrode. This indicates that activation of Nb dopants and formation of the anatase phase play an important role in the extraction of carrier from the organic layer to the anode electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Organic Photovoltaics
2. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
3. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
4. Polymer-fullerene composite solar Cells10.1002/anie.200702506 ↗
5. Upscaling of polymer solar cell fabrication using roll-to-roll processing10.1039/b9nr00430k ↗
6. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
7. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
8. ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
9. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
10. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
11. Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer10.1063/1.3453445 ↗
12. Optical anisotropy in single-walled carbon nanotube thin films: implications for transparent and conducting electrodes in organic photovoltaics10.1021/nl080563p ↗
13. Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices
14. Organic solar cells with solution-processed graphene transparent electrodes10.1063/1.2924771 ↗
15. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
16. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
17. A transparent metal: Nb-doped anatase TiO210.1063/1.1949728 ↗
18. Structural and electrical transport properties: Nb-doped TiO2 films deposited on LaAlO3 by rf sputtering10.1016/j.apsusc.2009.05.025 ↗
19. Niobium doped TiO2: Intrinsic transparent metallic anatase versus highly resistive rutile phase10.1063/1.2750407 ↗
20. rf magnetron sputter deposition of transparent conducting Nb-doped TiO2 films on SrTiO310.1063/1.2434005 ↗
21. Transport properties of d-electron-based transparent conducting oxide: Anatase Ti1−xNbxO210.1063/1.2721748 ↗
22. J.J. Berry, M.S. White, N.E. Widjonako, B.A. Bailey, A.K. Sigdel, C.W. Gorrie, N. Kopidakis, D.S. Ginley, D.C. Olson, Mixed metal oxide systems for organic photovoltaics, in: 34th IEEE Photovoltaic Specialists Conference, PA, 2009, pp. 001448–001451.10.1109/PVSC.2009.5411320 ↗
23. Nb-TiO2/polymer hybrid solar cells with photovoltaic response under inert atmosphere conditions10.1016/j.solmat.2010.03.011 ↗
24. Oxide/polymer interfaces for hybrid and organic solar cells: Anatase vs. Rutile TiO2
25. Direct growth of transparent conducting Nb-doped anatase TiO2 polycrystalline films on glass10.1063/1.3148267 ↗
26. Highly Transparent, low Resistance, and cost-Efficient Nb:TiO2/Ag/Nb:TiO2 multilayer electrode prepared at room temperature using black Nb:TiO2 target10.1149/1.3313361 ↗
27. The effect of rapid thermal annealing on the electrical, optical, and structural properties of Nb:TiO2 multilayer electrodes with an inserted nanoscale ag layer for organic solar cells10.1063/1.3499282 ↗
28. Electrical and optical properties of TiO2 anatase thin films10.1063/1.356306 ↗
29. Tauc · 1974
30. Indium tin oxide alternative-high work function transparent conducting oxides as anodes for organic light-emitting diodes10.1002/1521-4095(200110)13:19<1476::AID-ADMA1476>3.0.CO;2-Y ↗
31. Crystallization of amorphous BST/MgO (001) thin films10.1063/1.121469 ↗
32. Elschner · 2008
33. Fabrication of TiO2 nanotubes by using electrodeposited ZnO nanorod template and their application to hybrid solar cells10.1016/j.electacta.2007.10.041 ↗