journal article·2014-01

Probing the annealing induced molecular ordering in bulk heterojunction polymer solar cells using in-situ Raman spectroscopy

P. Veerender, Vibha Saxena, A.K. Chauhan, S.P. Koiry, P. Jha, Abhay Gusain, Sipra Choudhury, D.K. Aswal, S.K. Gupta

Publisher page

Abstract

Abstract We have carried out temperature dependent in-situ Raman as well as optical microscopy of poly(3-hexylthiophene) and [6,6]-phenyl-C 71 butyric acid methyl ester (P3HT:PCBM) films to investigate the structural and morphological evolution during heating and cooling cycles of thermal annealing. The full-width half-maximum of symmetric CaC stretching mode, CaC/C–C intensity ratio and Raman shift of CaC mode of P3HT measured during heating upto 130 °C as well as subsequent cooling revealed that: (i) molecular disorder in P3HT chains increase during heating cycle and (ii) on cooling the molecular ordering enhances rapidly at ~100 °C. However, heating to higher temperatures (>150 °C) leads to the formation of PCBM aggregates. The mechanism of morphology evolution in P3HT:PCBM films envisaged through in-situ Raman and optical microscopy has been confirmed by other ex-situ techniques, such as, atomic force microscopy, scanning electron microscopy, UV–vis spectroscopy and X-ray elemental mapping. A correlation between the morphological evolution and various photovoltaic parameters of the fabricated P3HT:PCBM solar cells has been established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
4. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
5. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
6. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
7. P3HT/PCBM bulk heterojunction solar cells: relation between morphology and electro-optical characteristics10.1016/j.solmat.2006.02.010 ↗
8. Thickness dependence and solution-degradation effect in poly(3-hexylthiophene): Phenyl-C61-butyric acid methyl ester based solar cells10.1016/j.solmat.2009.11.007 ↗
9. Brabec · 2011
10. Polymer crystallization of partially miscible polythiophene/fullerene mixtures controls morphology10.1021/ma200855r ↗
11. Factors limiting device efficiency in organic photovoltaics10.1002/adma.201202873 ↗
12. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells10.1063/1.2181635 ↗
13. Temperature dependent characteristics of poly(3 hexylthiophene)–fullerene based heterojunction organic solar cells10.1063/1.1545162 ↗
14. Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
15. Solvent annealing effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
16. Electric field-assisted self-organization of polymer:fullerene hybrids on the photovoltaic performance10.1039/c1ee01183a ↗
17. Poly(3-hexylthiophene) nanorods with aligned chain orientation for organic photovoltaics10.1002/adfm.200901760 ↗
18. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
19. Real-time investigation of crystallization and phase-segregation dynamics in P3HT:PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
20. Quantitative nanoscale monitoring the effect of annealing process on the morphology and optical properties of poly(3-hexylthiophene)/[6,6]-phenyl C61-butyric acid methyl ester thin film used in photovoltaic devices10.1063/1.3187930 ↗
21. Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing10.1039/B713926H ↗
22. In situ energy dispersive X-ray reflectometry measurements on organic solar cells upon working10.1063/1.2128069 ↗
23. In situ measurement of power conversion efficiency and molecular ordering during thermal annealing in P3HT: PCBM bulk heterojunction solar cells10.1039/c1jm12677f ↗
24. In situ monitoring of photovoltaic properties in organic solar cells during thermal annealing10.1016/j.orgel.2011.11.022 ↗
25. Optimal negative electrodes for poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction photovoltaic devices10.1063/1.2841067 ↗
26. Influence of PC60BM or PC70BM as electron acceptor on the performance of polymer solar cells10.1016/j.solmat.2011.09.006 ↗
27. Rationalizing phase transitions with thermal annealing temperatures for P3HT:PCBM organic photovoltaic devices10.1021/ma202063k ↗
28. Investigation of structural, optical, and electrical properties of regioregular poly(3-hexylthiophene)/fullerene blend nanocomposites for organic solar cells10.1016/j.tsf.2009.11.065 ↗
29. The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films10.1021/ja2013104 ↗
30. Understanding the influence of morphology on poly(3-hexylselenothiophene):PCBM solar cells10.1021/ma902477h ↗
31. Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: mapping morphology-dependent aggregated and unaggregated C–C species10.1021/ja900636z ↗
32. Raman and low temperature photoluminescence spectroscopy of polymer disorder in bulk heterojunction solar cell films10.1063/1.4747320 ↗
33. Vibrational Raman spectra of C70 and C706− studied by density functional theory10.1021/jp020222e ↗
34. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
35. Nanoscale morphology of conjugated polymer/fullerene-based bulk- heterojunction solar cells10.1002/adfm.200305026 ↗
36. Nanoparticle concentration profile in polymer-based solar cells10.1039/B920979D ↗
37. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
38. Absorption spectra modification in poly(3-hexylthiophene): methanofullerene blend thin films10.1016/j.cplett.2005.06.027 ↗
39. Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy10.1016/j.solmat.2008.10.027 ↗
40. Influence of nanomorphology on the photovoltaic action of polymer fullerene composites10.1088/0957-4484/15/9/035 ↗