Solution-processed-MoO3 hole extraction layer on oxygen plasma-treated indium tin oxide in organic photovoltaics
Source abstract
Abstract
Abstract Effects of oxygen plasma (O 2 plasma) treatment of ITO on the characteristics of solution-processed molybdenum oxide (MoO 3 ) hole extraction layer in bulk hetero-junction organic photovoltaics (OPVs) are studied. The chemical composition of O 2 plasma-treated ITO was determined using monochromatic X-ray photoelectron spectroscopy (XPS). The valence band energies were investigated by ultraviolet photoemission spectroscopy (UPS) measurements. XPS and UPS measurements reveal that O 2 plasma treatment of bare ITO film was found to incorporate the polar surface species such as (O 2 ) 2− , resulting in an increase of both workfunction from 4.62 to 5.05 eV and polar surface energy from 27 to 38 mN/m. The high work function results in efficient hole transport at the ITO/MoO 3 interfaces. The highly polar surface is readily available for uniform coating of MoO 3 on ITO. Electrical conductivity of oxidized ITO changes four orders of magnitude from 2.4×10 –2 to 4.08×10 2 S/cm, depending on O 2 plasma pressure conditions. Thus, the ITO/MoO 3 interface dominates the series resistance of OPVs fabricated with poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (P3HT:PCBM). The presence of (O 2 ) 2− states in the ITO/MoO 3 interface in OPVs is suggested to play a significant role in controlling the device lifetime as well as the efficiency of OPV.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
4. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
5. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
6. Three-dimensional nanobranched indium–tin-oxide anode for organic solar cells10.1021/nn2025836 ↗
7. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
8. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
9. Engineering the organic semiconductor–electrode interface in polymer solar cells10.1039/c000718h ↗
10. Anode interfacial tuning via electron-blocking/hole-transport layers and indium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
11. Effect of ultraviolet-ozone on ITO/P3HT interface for PEDOT:PSS-free polymer solar cells10.1016/j.solmat.2012.10.023 ↗
12. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
13. Interface materials for organic solar cells10.1039/b921624c ↗
14. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
15. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
16. Stability of the interface between indium–tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
17. Control of the surface composition of a conducting-polymer complex film to tune the work function10.1002/adfm.200700766 ↗
18. Three-dimensional inhomogeneities in PEDOT:PSS films10.1021/jp0464674 ↗
19. Transition metal oxide as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
20. p-type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
21. Morphological and electrical effect of an ultrathin iridium oxide hole extraction layer on P3HT:PCBM bulk-heterojunction solar cells10.1016/j.solmat.2010.12.039 ↗
22. Improving performance of organic solar cells using amorphous tungsten oxides as an interfacial buffer layer on transparent anodes10.1016/j.orgel.2009.03.016 ↗
23. Effect of NiOx thin layer fabricated by oxygen-plasma treatment on polymer photovoltaic cell10.1016/j.solmat.2010.04.077 ↗
24. Solution processed vanadium pentoxide as charge extraction layer for organic solar cells10.1002/aenm.201100076 ↗
25. Extension of stability in organic photovoltaic cells using UV/ozone-treated graphene sheets10.1016/j.solmat.2012.10.017 ↗
26. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
27. Solution-processable reduced graphene oxide as a novel alternative to PEDOT:PSS hole transport layers for highly efficient and stable polymer solar cells10.1002/adma.201102207 ↗
28. Solution processable nanocarbon platform for polymer solar cells10.1039/c1ee01333e ↗
29. Toward solution processed all-carbon solar cells: a perspective10.1039/c2ee21587j ↗
30. Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode10.1016/j.solmat.2011.10.002 ↗
31. Chlorinated indium tin oxide electrodes with high work function for organic device compatibility10.1126/science.1202992 ↗
32. A solution-processed MoOx anode interlayer for use within organic photovoltaic devices10.1002/adfm.201102622 ↗
33. Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer10.1016/j.solmat.2010.01.004 ↗
34. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
35. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
36. Solution processed MoO3 interfacial layer for organic photovoltaics prepared by a facile synthesis method10.1002/adma.201104771 ↗
37. Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics10.1039/c2jm14911g ↗
38. Mechanism for the increase of indium–tin-oxide work function by O2 inductively coupled plasma treatment10.1063/1.1633351 ↗
39. Characterizaiton of indium–tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗
40. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
41. Enhanced performance in polymer solar cells by surface energy control10.1002/adfm.201000960 ↗
42. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
43. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
44. Wettability and photochromic behavior of molybdenum oxide thin films10.1016/j.tsf.2011.09.068 ↗
45. Roth · 1982