A one-step sol–gel route derived Ag–CuO film as a novel solar selective absorber
Source abstract
Abstract
Abstract A novel one-step sol–gel method to fabricate spectrally selective solar absorber film has been developed. The selectively absorbing film consists of Ag nano-particles grow in a semiconductor matrix of cupric oxide (CuO). The influence of the preparation conditions, i.e. the addition of diethanolamine (DEA) and tetraethylenepentamine (TEPA) and Ag + /Cu 2+ molar ratios, on film structure and optical properties were studied. Texture properties (crystallinity, grain size, surface topography) were obtained by using transmission electron microscopy (TEM), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The results showed that the Ag nano-particles derived from TEPA had higher cystallization and better dispersibility, which were more conductive to the intrinsic absorption. Moreover, the heat treatment in the air did not oxidize the metallic Ag with the increased Ag + /Cu 2+ molar ratios, but caused the longitudinal agglomeration among the nanoparticles of Ag, thus led to a cone array structure on the film surface and enhanced the intrinsic absorption. The optical properties analysis of the fabricated film revealed a normal solar absorptivity of α =0.850 and low thermal emissivity of e =0.05. After adding an anti-reflection layer, the absorptivity had been improved to 0.917 while the thermal emittance remained unaltered. Hence Ag–CuO composite could be used as a novel candidate material for solar selective absorber films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. The optical properties of sputtered composite of Al–AlN10.1016/j.solmat.2005.11.006 ↗
2. Direct current reactive sputtering Cr–Cr2O3 cermet solar selective surfaces for solar hot water applications10.1016/j.tsf.2008.09.082 ↗
3. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
4. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO asselective solar absorbers10.1016/j.solmat.2008.04.023 ↗
5. Developments in the synthesis of flat plate solar selective absorber materials via sol-gel methods: a review
6. Durability tests and up-scaling of selective absorbers based on copper-manganese oxide deposited by dip-coating10.1016/j.solmat.2010.02.006 ↗
7. Optimization of a solution-chemically derived solar absorbing spectrally selective surface10.1016/j.solmat.2006.07.002 ↗
8. Sol–gel derived CuCoMnOx spinel coatings for solar absorbers: structural and optical properties10.1016/S0927-0248(01)00024-1 ↗
9. Silica–carbon nanocomposites – a new concept for the design of solar absorbers10.1002/1616-3028(200203)12:3<197::AID-ADFM197>3.0.CO;2-A ↗
10. Solution-chemical derived nickel–alumina coatings for thermal solar absorbers10.1016/S0038-092X(03)00199-3 ↗
11. Structure and morphology of nickel–alumina/silica solar thermal selective absorbers10.1016/j.jnoncrysol.2010.09.023 ↗
12. Anti-reflection coatings for solution-chemically derived nickel-alumina solar absorbers10.1016/j.solmat.2003.12.015 ↗
13. ERDA of Ni–Al2O3/SiO2 solar thermal selective absorbers10.1016/j.solmat.2008.02.014 ↗
14. CuO thin films made of nanofibers for solar selective absorber applications10.1016/j.solener.2013.05.018 ↗
15. Surface chemistry and trimethylsilyl functionalization of Stöber silica sols10.1016/S0022-3093(02)01629-0 ↗
16. Ag and AgO thin film formation in Ag+-triethanolamine solutions10.1016/S0167-577X(00)00257-3 ↗
17. Effects of diethanolamine on the evolution of silver/titanium dioxide sol-gel process10.1007/s10971-010-2369-4 ↗
18. Fractal and dendritic growth of metallic Ag aggregated from different kinds of gamma-irradiated solutions10.1021/jp000225w ↗
19. Structural and optical properties of CuMnCoOx spinel thin films prepared by a citric acid-based sol-gel dip coating route for solar absorber applications10.1007/s10971-015-3630-7 ↗
20. A new concept for solar energy thermal conversion10.1063/1.87990 ↗
21. Spectrally selective absorber coating from transition metal complex for efficient photothermal conversion10.1007/s10853-013-7639-4 ↗
22. Ni–Al2O3 cermet solar absorbers by RF planar magnetron sputtering for high temperature applications10.1016/0165-1633(89)90059-2 ↗