Solution processed encapsulation for organic photovoltaics
Source abstract
Abstract
Abstract In this paper, we demonstrate a novel encapsulation method for organic photovoltaic (OPV) with solution process. Inverted structure of organic photovoltaic (OPV) is used because its stability is better than that of the conventional structure. Zinc Oxide (ZnO) is used as a buffer layer on top of the anode electrode to reduce damage to the OPV device since the OPV device should be protected from the solution which is used for encapsulation. We found that the UV resin (400 μm) encapsulation with ZnO buffer layer enhanced the stability of the device, where the power conversion efficiency (PCE) degrades by 20.5% after 672 h in air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C60 heterojunction photovoltaic cell10.1063/1.115797 ↗
3. Stability of polymer solar cells10.1002/adma.201104187 ↗
4. A donor–acceptor–acceptor molecule for vacuum-processed organic solar cells with a power conversion efficiency of 6.4%10.1039/C2CC16390J ↗
5. Highly efficient vacuum-processed bulk hetero-junction solar cells based on merocyanine dyes10.1002/aenm.201100283 ↗
6. 〈http://www.heliatek.com〉.
7. H.P. Kim, A.R.B.M. Yusoff, J. Jang, Organic photovoltaic solar cells with cathode modified by ZnO, Journal of Nanoscience and Nanotechnology, in press.
8. The effect of post-processing treatments on inflection points in current–voltage curves of roll-to-roll processed polymer photovoltaics10.1016/j.solmat.2010.06.007 ↗
9. Post-fabrication annealing effects on the performance of P3HT:PCBM solar cells with/without ZnO nanoparticles10.1016/j.physb.2011.09.103 ↗
10. Evolution of vertical phase separation in P3HT:PCBM thin films induced by thermal annealing10.1016/j.matchemphys.2011.06.007 ↗
11. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
12. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
13. Encapsulation of pentacene/C60 organic solar cells with Al2O3 deposited by atomic layer deposition10.1063/1.2751108 ↗
14. Encapsulation of organic solar cells with ultrathin barrier layers deposited by ozone-based atomic layer deposition10.1016/j.orgel.2010.08.020 ↗
15. The use of polyurethane as encapsulating method for polymer solar cells—an inter laboratory study on outdoor stability in 8 countries10.1016/j.solmat.2011.12.013 ↗