Implementation of Fermi–Dirac statistics and advanced models in PC1D for precise simulations of silicon solar cells
Source abstract
Abstract
Abstract In this work we present a modified version of the commonly used semiconductor simulation program PC1D, named cmd-PC1D 6.0, which applies Fermi–Dirac (F–D) statistics, thus improving on the existing Boltzmann approximation that is employed in the original program. Several up-to-date models for crystalline Si have been implemented in the new program, including injection dependent band gap narrowing, carrier mobility and Auger recombination. The results obtained using cmd-PC1D 6.0 are verified against well-accepted and modern simulations tools for a range of both phosphorus- and boron-doped emitters with varying surface concentration. We find a good correspondence between the simulation results obtained with the different programs, with a deviation of less than 2 fA/cm2 for the calculated emitter saturation current density using F–D statistics and less than 0.8 % relative deviation in all the main solar cell parameters under 1 sun illumination. By using the correct carrier statistics and the appropriate set of models it is now possible to avoid the commonly used effective models and adapted values, thus taking a large step in bringing PC1D further towards a more general, consistent and physically meaningful simulation tool for Si solar cells. The new program can be run from a command line or within a recently developed, powerful graphical user interface. Both cmd-PC1D 6.0 and the graphical user interface are freely available for download.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Numerical modeling of highly doped Si:P emitters based on Fermi–Dirac statistics and self-consistent material parameters10.1063/1.1501743 ↗
2. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
3. Empirical determination of the energy band gap narrowing in highly doped n+ silicon10.1063/1.4816694 ↗
4. D.T. Rover, P.A. Basore, G.M. Thorson, Solar cell modeling on personal computers, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, Las Vegas, Nevada, USA, 1985, pp. 703–709.
5. P.A. Basore, D.T. Rover, A.W. Smith, PC-1D version 2: enhanced numerical solar cell modelling, in: Proceedings of the 20th IEEE Photovoltaic Specialists Conference, Las Vegas, Nevada, USA, 1988, pp. 389–396.10.1109/PVSC.1988.105730 ↗
6. P.A. Basore, PC-1D Version 3: improved speed and convergence, in: IEEE Photovoltaic Specialists Conference, 1991, Conference Record of the Twenty Second, vol. 1, 1991, pp. 299–302.10.1109/PVSC.1991.169227 ↗
7. P.A. Basore D.A. Clugston, PC1D version 4 for windows: from analysis to design, in: 25th IEEE Photovoltiac Specialists Conference, Washington, 1996, pp. 377–381.10.1109/PVSC.1996.564023 ↗
8. D.A. Clugston, P.A. Basore, PC1D version 5: 32-bit solar cell modeling on personal computers, in: Photovoltaic Specialists Conference, 1997., Conference Record of the Twenty-Sixth IEEE, 1997, pp. 207–210.
9. A graphical user interface for multivariable analysis of silicon solar cells using scripted PC1D simulations10.1016/j.egypro.2013.07.251 ↗
10. PC1D help file. [Online]. Available: 〈http://www.pvlighthouse.com.au/Resources/PC1D/〉. [Accessed: 01-Apr-2014].
11. Würfel · 2009 · 44
12. Accurate, short series approximations to Fermi–Dirac integrals of order −1/2, 1/2, 1, 3/2, 2, 5/2, 3, and 7/210.1063/1.335269 ↗
13. Rational function approximations for Fermi–Dirac integrals10.1086/191748 ↗
14. K.R. McIntosh, P.P. Altermatt, A freeware 1D emitter model for silicon solar cells, in: IEEE 35th Photovoltaic Specialists Conference, 2010, pp. 002188–002193.10.1109/PVSC.2010.5616124 ↗
15. K.R. McIntosh, P.P. Altermatt, T.J. Ratcliff, K.C. Fong, L.E. Black, S.C. Baker-Finch, M.D. Abbott, An examination of three common assumptions used to simulate recombination in heavily doped silicon, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 1672–1679.
16. Models for numerical device simulations of crystalline silicon solar cells—a review10.1007/s10825-011-0367-6 ↗
17. Reassessment of the intrinsic carrier density in crystalline silicon in view of band-gap narrowing10.1063/1.1529297 ↗
18. Intrinsic carrier concentration and minority-carrier mobility of silicon from 77 to 300K10.1063/1.353288 ↗
19. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
20. General parameterization of Auger recombination in crystalline silicon10.1063/1.1432476 ↗
21. Intrinsic concentration, effective densities of states, and effective mass in silicon10.1063/1.345414 ↗
22. A unified mobility model for device simulation—I. Model equations and concentration dependence10.1016/0038-1101(92)90325-7 ↗
23. A unified mobility model for device simulation—II. Temperature dependence of carrier mobility and lifetime10.1016/0038-1101(92)90326-8 ↗
24. A.L. Blum, J.S. Swirhun, R.A. Sinton, A. Kimmerle, Updated analysis to the WCT-120 QSSPC measurement system using advanced device physics, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013.
25. Synopsis Inc, Sentaurus Device, Version H-2013.03. Mountain View, California, USA.
26. Dopant and carrier concentration in Si in equilibrium with monoclinic SiP precipitates10.1103/PhysRevB.53.7836 ↗
27. Modelling carrier recombination in highly phosphorus-doped industrial emitters10.1016/j.egypro.2011.06.136 ↗
28. Application of ion Implantation Emitter in PERC Solar Cells10.1109/JPHOTOV.2013.2282893 ↗
29. Surface recombination velocity of highly doped n-type silicon10.1063/1.363250 ↗
30. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
31. Approximations for Fermi–Dirac integrals, especially the function used to describe electron density in a semiconductor10.1016/0038-1101(82)90143-5 ↗