journal article·2009-08

Effect of electrode geometry on the photovoltaic performance of dye-sensitized solar cells

Won Jae Lee, Easwaramoorthi Ramasamy, Dong Yoon Lee

Publisher page

Abstract

Abstract Effect of electrode geometry on the photovoltaic performance of dye-sensitized solar cell (DSSC) has been investigated to optimize the device geometry for reliable energy conversion efficiency assessment. Mesoporous TiO2 layers with an identical active area (0.40 cm2) and different dimension are prepared on FTO glass substrate by the screen printing method and used as photoanodes for DSSCs. Under 1 sun illumination (AM 1.5G, 100 mW cm−2), both the open-circuit voltage and the short-circuit current density are independent of electrode geometry whereas the fill factor and hence energy conversion efficiency show strong dependency. Electrochemical impedance spectroscopy analysis indicates that the distance between active layer and ohmic contact directly contributes to internal series resistance and influence photovoltaic performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A low-cost, high efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Advances in liquid electrolyte and solid state dye sensitized solar cells10.1002/adma.200602903 ↗
3. Advancing beyond current generation dye-sensitized solar cells10.1039/b809672d ↗
4. Dye-sensitized solar cells with conversion efficiency of 11.1%,10.1143/JJAP.45.L638 ↗
5. Reproducible manufacturing of dye-sensitized solar cells on a semi-automated baseline10.1002/pip.481 ↗
6. Dye-sensitized solar cells: scale up and current–voltage characterization10.1016/j.solmat.2007.05.022 ↗
7. Photovoltaic characterization of dye-sensitized solar cells: effect of device masking on conversion efficiency10.1002/pip.683 ↗
8. Calibration of solar simulator for evaluation of dye-sensitized solar cells10.1016/j.solmat.2004.01.030 ↗
9. Measuring methods of cell performance of dye-sensitized solar cells10.1063/1.1784556 ↗
10. Reporting solar cell efficiencies in solar energy materials and solar cells10.1016/j.solmat.2008.01.003 ↗
11. Characterization of organic solar cells: the importance of device layout10.1002/adfm.200700295 ↗
12. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance10.1063/1.2895058 ↗
13. A glass frit-sealed dye solar cell module with integrated series connections10.1016/j.solmat.2005.09.003 ↗
14. Glass frit overcoated silver grid lines for nano-crystalline dye sensitized solar cells10.1016/j.jphotochem.2006.03.006 ↗
15. Control of dark current in photoelectrochemical (TiO2/I–/I3–) and dye-sensitized solar cells10.1039/b505718c ↗
16. Improvement of efficiency of dye-sensitized solar cells by reduction of internal resistance10.1063/1.1925773 ↗
17. A system approach to molecular solar cells10.1016/j.ccr.2004.04.012 ↗
18. Spray coated multi-wall carbon nanotube counter electrode for tri-iodide (I3−) reduction in dye-sensitized solar cells10.1016/j.elecom.2008.05.013 ↗