Investigation of the short-circuit current increase for PV modules using halved silicon wafer solar cells
Source abstract
Abstract
Abstract It is well established that using halved silicon wafer solar cells in a photovoltaic (PV) module is an efficient way to reduce cell-to-module resistive losses. In this work we have shown that PV modules using halved cells additionally show an improvement in their optical performance, resulting in a higher current generation. We attribute this increase in current to gains in light reflected from the backsheet area. An optical model is presented that quantitatively determines the influence of the backsheet on the short-circuit current of a PV module. We find that, for an accurate prediction, several factors have to be taken into account, including the geometry of the module, the backscattering properties of the backsheet and the illumination spectrum. Particularly the angularly and spectrally resolved scattering properties of the backsheet are shown to have a large impact on the current generation. Furthermore, light beam induced current (LBIC) measurements are used to test the backscattering properties of the backsheet and also the influence of the illumination spectrum. LBIC measurements are also used to verify the simulation results, giving good agreement. Thus the design of a PV module can be optimized by simulation. A standard full-size cell module and a halved-cell module with optimized cell spacing are fabricated. Compared to the standard module, the half-cell module is shown to have 4.60% more power (315.3 vs. 329.8 W), 1.46% higher fill factor (75.5 vs. 76.6%), and 3.08% more current (9.08 vs. 9.36 A).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. International Technology Roadmap for Photovoltaic (ITRPV) Results, in 2013, 2012.
2. A quantitative analysis of photovoltaic modules using halved cells
3. R.F. Clark, J.P. Posbic, J.M. Zahler, M. Gleaton, D.E. Carlson, D.W. Cunningham, Reaching grid parity using BP solar crystalline silicon technology, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, USA, 2010, pp. 1197–1202.
4. S. Krauter, P. Grunow, Optical modelling and simulation of PV module encapsulation to improve structure and material properties for maximum energy yield, in: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, vols. 1 and 2, 2006, pp. 2133–2137.10.1109/WCPEC.2006.279926 ↗
5. P. Grunow, S. Krauter, Modelling of the encapsulation factors for photovoltaic modules, in: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, vols. 1 and 2, 2006, pp. 2152–2155.10.1109/WCPEC.2006.279931 ↗
6. M.B. Koentopp, M. Schutze, D. Buss, R. Seguin, Optimized module design: a study of encapsulation losses and the influence of design parameters on module performance, in: Proceedings of the 2012 38th IEEE Photovoltaic Specialists Conference (PVSC), 2012, pp. 3178–3182.10.1109/PVSC.2012.6318253 ↗
7. Optimized module design: a study of encapsulation losses and the influence of design parameters on module performance10.1109/JPHOTOV.2012.2213071 ↗
8. P.J. Sanchez-Illescas, P. Carpena, P. Bernaola-Galván, M.P. Rocha, J.E.C. Rubio, M. Sidrach-de-Cardona, P. Sánchez-Friera, B. Lalaguna, Performance of photovoltaic modules with white reflective back sheets, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2008, pp. 346–349.
9. W.-S. Su, Y.-C.C.W.-H. Liao, C.-H. Huang, D.-C. Liu, M.-Y. Huang, Z.-C. Wu, S.-J. Ho, Optimization of the output power by effect of backsheet reflectance and spacing between cell strings, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, Seattle, Wash, USA, 2011, pp. 3218–3220.
10. A simple ray tracer to compute the optical concentration of photovoltaic modules10.1002/pip.647 ↗
11. K.R. McIntosh, J.N. Cotsell, J.S. Cumpston, A.W. Norris, N.E. Powell, B.M. Ketola, An optical comparison of silicone and EVA encapsulants for conventional silicon PV modules: a ray-tracing study, in: Proceedings of the 2009 34th IEEE Photovoltaic Specialists Conference, vols. 1–3, 2009, pp. 1649–1654.10.1109/PVSC.2009.5411624 ↗
12. MATLAB and Statistics Toolbox Release 2012b, The MathWorks, Inc., Natick, Massachusetts, United States.
13. Detailed current loss analysis for a PV module made with textured multicrystalline silicon wafer solar cells10.1109/JPHOTOV.2013.2295736 ↗
14. B. Max, E. Wolf, Principles of optics: electromagnetic theory of propagation, interference and diffraction of light, CUP Archive, 1999.
15. LBIC investigations of the lifetime degradation by extended defects in multicrystalline solar silicon10.4028/www.scientific.net/SSP.63-64.115 ↗
16. CELLO: an advanced LBIC measurement technique for solar cell local characterization10.1016/S0927-0248(02)00270-2 ↗
17. Spatially distributed model for the analysis of laser beam induced current (LBIC) measurements of thin film silicon solar modules10.1016/j.solmat.2010.02.020 ↗
18. Multi-laser LBIC system for thin film PV module characterisation10.1016/j.solmat.2008.10.019 ↗
19. International Standard IEC 60904-8 2013: Measurement of spectral response of a photovoltaic (PV) device, International Electrotechnical Commission (Geneva, Switzerland).