Bandgap tunable CdS:O as efficient electron buffer layer for high-performance Sb2Se3 thin film solar cells
Source abstract
Abstract
Abstract Antimony selenide (Sb2Se3) is a promising low-cost and low-toxicity photovoltaic material. The electron buffer layer is of great significance for superstrate Sb2Se3 thin film solar cells. Herein, high-performance Sb2Se3 solar cells were fabricated by using sputtered, bandgap-tunable oxygenated cadmium sulfide (CdS:O) as a novel class of electron buffer layers. The optical transparency and energy band levels of CdS:O buffers were precisely adjusted by controlling the oxygen content in CdS:O layers. With the incorporation of an optimized wide band-gap CdS:O electron buffer layer, the device parameters JSC, VOC and FF were all improved. An efficiency of as high as 6.29% was achieved. It's found that, besides the reduced light absorption in the CdS:O layer, the high-quality CdS:O/Sb2Se3 junction played a vital role in the efficiency enhancement. The optimization of interfacial band alignment and defects passivation by atomic oxygen both contribute to the improved quality of CdS:O/Sb2Se3 heterojunction. This study demonstrates that the sputtered CdS:O is a promising electron buffer layer for preparation of high-efficiency and large-area Sb2Se3 thin film solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Antimony selenide thin-film solar cells10.1088/0268-1242/31/6/063001 ↗
2. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
3. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
4. 6.5% Certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer10.1021/acsenergylett.7b00648 ↗
5. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
6. Thin-film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
7. Thin film CdS/CdTe solar cells: research perspectives10.1016/j.solener.2005.10.008 ↗
8. Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells10.1002/pip.494 ↗
9. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
10. Grain size dependence of the bandgap in chemical bath deposited CdS thin films10.1016/j.solmat.2004.01.002 ↗
11. Mechanisms and modification of nonlinear shunt leakage in Sb2Se3 thin film solar cells10.1016/j.solmat.2018.06.022 ↗
12. Accelerated optimization of TiO2/Sb2Se3 thin film solar cells by high-throughput combinatorial approach10.1002/aenm.201700866 ↗
13. Magnetron sputtered ZnO buffer layer for Sb2Se3 thin film solar cells10.1016/j.solmat.2017.07.014 ↗
14. Sb2Se3 thin-film photovoltaics using aqueous solution sprayed SnO2 as the buffer layer10.1002/aelm.201700329 ↗
15. Low-temperature deposited SnO2 used as the buffer layer of Sb2Se3 solar cell10.1016/j.matlet.2018.03.141 ↗
16. Nanostructured CdS:O film: preparation, properties, and application10.1002/pssc.200304217 ↗
17. Oxygenated CdS window layer for sputtered CdS/CdTe solar cells10.1557/PROC-763-B8.9 ↗
18. X. Wu, R. Dhere, Y. Yan, I. Romero, Y. Zhang, J. Zhou, C. DeHart, A. Duda, C. Perkins, B. To, High-efficiency polycrystalline CdTe thin-film solar cells with an oxygenated amorphous CdS (a-CdS:O) window layer, in: Photovoltaic Specialists Conference, Conference Record of the Twenty-Ninth IEEE, IEEE, 2002, pp. 531–534.
19. J.M. Kephart, R. Geisthardt, W. Sampath, Sputtered, oxygenated CdS window layers for higher current in CdS/CdTe thin film solar cells, in: Photovoltaic Specialists Conference (PVSC), 38th IEEE, IEEE, 2012, pp. 000854–000858.10.1109/PVSC.2012.6317737 ↗
20. Properties of reactively sputtered oxygenated cadmium sulfide (CdS:O) and their impact on CdTe solar cell performance10.1116/1.4903214 ↗
21. Optimization of CdTe thin-film solar cell efficiency using a sputtered, oxygenated CdS window layer10.1002/pip.2578 ↗
22. Evolution of oxygenated cadmium sulfide (CdS:O) during high-temperature CdTe solar cell fabrication10.1016/j.solmat.2016.05.038 ↗
23. Y. Lee, A. Ferlauto, C. Wronski, Contributions of bulk, interface and built-in potential to the open circuit voltage of a-Si: H solar cells, in: Photovoltaic Specialists Conference, Conference Record of the Twenty-Sixth IEEE, IEEE, 1997, pp. 683–686.10.1109/PVSC.1997.654181 ↗
24. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
25. Cu(In, Ga)Se2 solar cells with controlled conduction band offset of window/Cu(In, Ga)Se2 layers10.1063/1.1366655 ↗
26. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
27. Emitter/absorber interface of CdTe solar cells10.1063/1.4953820 ↗
28. Characterization of CBO and defect states of CZTSe solar cells prepared by using two-step process10.1016/j.cap.2017.12.004 ↗
29. Limiting effects of conduction band offset and defect states on high efficiency CZTSSe solar cell10.1016/j.nanoen.2017.12.031 ↗
30. Improving the performance of Sb2Se3 thin film solar cells over 4% by controlled addition of oxygen during film deposition10.1002/pip.2627 ↗