Additive assisted morphological optimization of photoactive layer in polymer solar cells
Source abstract
Abstract
Abstract Herein, we clearly demonstrate that the inclusion of the organic solid additive (2,3-dihydroxypyridine, DOH) into the poly(diketopyrrolopyrrole-terthiophene) (PDPP3T) and phenyl-C61-butyric acid methyl ester (PCBM) (PDPP3T:PCBM) photoactive blend system alters the nanoscale morphology and enhances the photovoltaic (PV) performance of the inverted bulk heterojunction (BHJ) based polymer solar cells (PSCs). The influence of DOH additive casted PDPP3T: PCBM thin films on the optical, morphology and structural features is evaluated and correlated with PV characteristics. Topography images through atomic force microscopy reveal that the incorporation of DOH into PDPP3T: PCBM induces a finer nanoscale phase segregation between polymer and fullerene domains with fibrillar morphology. The PV performance of the DOH processed PDPP3T: PCBM devices is evaluated by current-voltage (J-V) characteristics and compared with pristine and 1, 8-diiodooctane (DIO) modified PDPP3T: PCBM devices. Interestingly, the incorporation of DOH (0.5 wt%) into PDPP3T: PCBM device witnessed the best PCE of 6.36%, which is significantly higher (69.1%) than that of the reference (3.76%). This significant enhancement in the performance of the device is mainly attributed to a dramatic increase in the short-circuit current density and fill-factor due to the improved bicontinuous interpenetrated phase separation and balanced charge transport. In addition, the measurements on photo-induced charge carrier extraction by linearly increasing voltage reveal that DOH incorporated devices exhibit higher mobility and charge carrier density as compared to those of pristine modified BHJ PSCs. The presence of vicinal functional groups in DOH contributes to the possible molecular level interactions with the blend components and accounts for the morphology and device performance enhancements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
2. How to design low bandgap polymers for highly efficient organic solar cells10.1016/j.mattod.2013.12.005 ↗
3. High efficient ternary polymer solar cells based on absorption complementary materials as electron donor10.1016/j.solmat.2015.05.037 ↗
4. Tailoring nanoscale morphology of polymer: fullerene blends using electrostatic field10.1021/acsami.6b10870 ↗
5. Improved performance by morphology control via fullerenes in PBDT-TBT-alkoBT based organic solar cells10.1039/C5TA02709H ↗
6. Critical role of domain crystallinity, domain purity and domain interface sharpness for reduced bimolecular recombination in polymer solar cells10.1016/j.nanoen.2014.12.027 ↗
7. Improving photovoltaic properties of P3HT: IC60BA through the incorporation of small molecules10.3390/polym10020121 ↗
8. High-performance polymer solar cells employing rhodamines as cathode interfacial layers10.1021/acsami.7b07855 ↗
9. A futuristic strategy to influence the solar cell performance using fixed and mobile dopants incorporated sulfonated polyaniline based buffer layer10.1016/j.solmat.2015.05.035 ↗
10. Electrostatic nanoassembly of contact interfacial layer for enhanced photovoltaic performance in polymer solar cells10.1016/j.solmat.2016.04.018 ↗
11. A new optical-electrical integrated buffer layer design based on gold nanoparticles tethered thiol containing sulfonated polyaniline towards enhancement of solar cell performance10.1016/j.solmat.2017.08.029 ↗
12. Enhancing the photovoltaic performance of polymer solar cells by manipulating photoactive/metal interface10.1166/jnn.2017.15110 ↗
13. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
14. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
15. 10.8% Efficiency polymer solar cells based on PTB7-Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
16. Breaking the 10% efficiency barrier in organic photovoltaics: morphology and device optimization of well-known PBDTTT polymers
17. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
18. Hydrogen bonding in bulk heterojunction solar cells: a case study10.1038/srep05701 ↗
19. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
20. Hierarchical nanomorphologies promote exciton dissociation in polymer/fullerene bulk heterojunction solar cells10.1021/nl201715q ↗
21. Polymer solar cells processed using anisole as a relatively nontoxic solvent10.1002/ente.201300174 ↗
22. Green-solvent-processable organic solar cells10.1016/j.mattod.2016.02.019 ↗
23. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells10.1002/adma.201202855 ↗
24. A real-time study of the benefits of co-solvents in polymer solar cell processing10.1038/ncomms7229 ↗
25. Improving solar cell efficiency through hydrogen bonding: a method for tuning active layer morphology10.1021/cm503915t ↗
26. Subtle side-chain tuning on terminal groups of small molecule electron acceptors for efficient fullerene-free polymer solar cells10.1039/C7TA04431C ↗
27. Synergistic effect of processing additives and thermal annealing in organic solar cells: the "Morphology of Magic"10.1039/C7CP00956A ↗
28. Preheated solvent exposure on P3HT:PCBM thin film: a facile strategy to enhance performance in bulk heterojunction photovoltaic cells10.1016/j.cap.2014.08.010 ↗
29. Mild wetting poor solvent induced hydrogen bonding interactions for improved performance in bulk heterojunction solar cells10.1039/C3TA13875E ↗
30. High-pressure solvent vapor annealing with a benign solvent To rapidly enhance the performance of organic photovoltaics10.1021/acsami.5b01658 ↗
31. A universal processing additive for high-performance polymer solar cells10.1039/C6RA27944A ↗
32. Understanding solvent manipulation of morphology in bulk-heterojunction organic solar cells10.1002/asia.201600374 ↗
33. Additives for morphology control in high-efficiency organic solar cells10.1016/j.mattod.2013.08.013 ↗
34. Organic photovoltaics: crosslinking for optimal morphology and stability10.1016/j.mattod.2015.04.001 ↗
35. Manipulating the horizontal morphology and vertical distribution of the active layer in BHJ-PSC with a multi-functional solid organic additive10.1039/C3TA15378A ↗
36. Optimization of charge carrier transport balance for performance improvement of PDPP3T-based polymer solar cells prepared using a hot solution10.1039/C5CP00963D ↗
37. Correlating dilute solvent interactions to morphology and OPV device performance10.1016/j.orgel.2013.06.016 ↗
38. High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive10.1039/c2ee21481d ↗
39. Efficiency enhancement of polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct via methylthiophene additive10.1002/aenm.201100378 ↗
40. Solvent additives and their effects on blend morphologies of bulk heterojunctions10.1039/C0JM01976C ↗
41. Butanedithiol solvent additive extracting fullerenes from donor phase to improve performance and photostability in polymer solar cells10.1021/acsami.6b16538 ↗
42. Toward efficient thick active PTB7 photovoltaic layers using diphenyl ether as a solvent additive10.1021/acsami.6b03453 ↗
43. Using volatile additives to alter the morphology and performance of active layers in thin-film molecular photovoltaic devices incorporating bulk heterojunctions10.1039/c3cs35447d ↗
44. Removal of residual diiodooctane improves photostability of high-performance organic solar cell polymers10.1021/acs.chemmater.5b04346 ↗
45. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
46. Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
47. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor−acceptor copolymers10.1021/cm901487f ↗
48. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
49. High mobility diketopyrrolopyrrole (DPP)-based organic semiconductor materials for organic thin film transistors and photovoltaics10.1039/c3ee00015j ↗
50. Diketopyrrolopyrrole polymers for organic solar cells10.1021/acs.accounts.5b00334 ↗
51. Solution processed pristine PDPP3T polymer as hole transport layer for efficient perovskite solar cells with slower degradation10.1016/j.solmat.2015.10.008 ↗
52. Versatile role of solvent additive for tailoring morphology in polymer solar cells for efficient charge transport10.1166/jnn.2015.10513 ↗
53. Interplay of nanoscale domain purity and size on charge transport and recombination dynamics in polymer solar cells10.1039/C3NR05177C ↗
54. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
55. Controlling solution-phase polymer aggregation with molecular weight and solvent additives to optimize polymer-fullerene bulk heterojunction solar cells
56. Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology10.1021/ja306844f ↗
57. Stable and controllable polymer/fullerene composite nanofibers through cooperative noncovalent interactions for organic photovoltaics10.1021/cm501251n ↗
58. Functional solid additive modified PEDOT:PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells10.1038/srep45079 ↗
59. Enhanced lifetime of polymer solar cells by surface passivation of metal oxide buffer layers10.1021/acsami.5b04687 ↗
60. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
61. Improved performances of organic light-emitting diodes with metal oxide as anode buffer10.1063/1.2430511 ↗
62. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
63. Enhanced performance of PDPP3T/PCBM solar cells using high boiling solvent and UV - ozone treatment10.1109/TED.2013.2255058 ↗
64. Vertical and lateral morphology effects on solar cell performance for a thiophene-quinoxaline copolymer:PC70BM blend10.1039/C5TA00683J ↗
65. Critical factors governing vertical phase separation in polymer-PCBM blend films for organic solar cells10.1039/C6TA06508B ↗
66. Toward enhancing solar cell performance: an effective and “green” additive10.1021/acsami.7b17495 ↗
67. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
68. Quantification of nano- and mesoscale phase separation and relation to donor and acceptor quantum efficiency, Jsc, and FF in polymer: fullerene solar cells10.1002/adma.201400216 ↗
69. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗