journal article·2014-07Open access

Effect of rapid thermal processing conditions on the properties of Cu2ZnSnS4 thin films and solar cell performance

M.G. Sousa, A.F. da Cunha, P.A. Fernandes, J.P. Teixeira, R.A. Sousa, J.P. Leitão

Abstract

Abstract In the present work, we have studied the effect of several sulphurization conditions on the properties of Cu 2 ZnSnS 4 thin films obtained through rapid thermal processing (RTP) of multi-period precursors with 8 periods of Zn/SnS 2 /CuS. In this study we varied the heating rate, the maximum sulphurization temperature, the time at maximum temperature and the amount of evaporated sulphur. The samples were characterized through scanning electron microscopy, energy dispersive spectroscopy, Raman scattering spectroscopy, X-ray diffraction, photoluminescence and I – V measurements. We have observed that at heating rates above 0.5 °C/s the samples delaminated severely. As a result further tests were carried out at 0.2 °C/s heating rate. The morphological studies revealed that the samples sulphurized at higher temperatures, shorter times and higher amount of evaporated sulphur exhibited larger grain sizes. The structural analysis based on Raman scattering and XRD did not lead to a clear distinction between the samples. Photoluminescence spectroscopy studies showed an asymmetric broad band characteristic of CZTS, which occurs in the range of 1.0–1.4 eV and a second band, on the high energy side of the previous one, peaking at around 1.41 eV. The intensity of this latter band varies from sample to sample revealing substantial differences in their optical properties. This band appears to originate either from the surface of the absorber or from the CdS layer and has a clear correlation with cell efficiency. The higher the intensity of this band the lower the cell efficiency, presumably due to the increase in recombination resulting from CZTS surface decomposition and eventually from the CdS with modified optoelectronic properties. The cell results hint toward a detrimental effect of long sulphurization times and a positive effect of higher sulphur vapour pressure and higher sulphurization temperature. Solar cell efficiencies improved with increased grain size in the absorber layer. The highest cell efficiency obtained in this study was 3.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Kesterite thin films for photovoltaics: a review10.1051/epjpv/2012008 ↗
2. H. Katagiri, M. Nishimura, T. Onozawa, S. Maruyama, M. Fujita, T. Sega, T. Watanabe. Rare-metal free thin film solar cell, in: Proceedings of the IEEE Power Conversion Conference, Nagaoka, Japan, 1997, p. 1003.10.1109/PCCON.1997.638392 ↗
3. CuxSnSx+1 (x=2,3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering
4. Growth and characterization of Cu2ZnSn(S,Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
5. The influence of the composition ratio on CZTS-based thin film solar cells
6. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
7. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
8. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency
9. Formation of Cu2ZnSnS4 absorber layers for solar cells by electrodeposition-annealing route10.1016/j.tsf.2013.04.038 ↗
10. Structural and compositional properties of CZTS thin films formed by rapid thermal annealing of electrodeposited layers10.1016/j.jcrysgro.2013.06.012 ↗
11. Mo bilayer for thin film photovoltaics revisited10.1088/0022-3727/43/34/345501 ↗
12. Cu2ZnSnS4 films deposited by a soft-chemistry method10.1016/j.tsf.2008.11.035 ↗
13. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
14. Cu2Zn1−xCdxSn(Se1−y)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
15. Raman spectrum of cubic ZnS10.1103/PhysRev.182.838 ↗
16. Effect of annealing on structural, optical and electrical properties of pulse electrodeposited tin sulphide films10.1016/j.mssp.2012.07.003 ↗
17. Preparation of SnS films using solid sources deposited by the PECVD method with controllable film characters10.1016/j.jallcom.2012.07.144 ↗
18. Synthesis and characterization of the SnS nanowires via chemical vapor deposition10.1007/s00339-011-6560-4 ↗
19. Assessment of the potential of tin sulphide thin films prepared by sulphurization of metallic precursors as cell absorbers10.1016/j.tsf.2011.01.393 ↗
20. Raman scattering in β-ZnS10.1103/PhysRevB.69.014301 ↗
21. Coevaporation of Cu2ZnSnS4 thin films10.1063/1.3483760 ↗
22. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
23. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
24. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗