Light intensity dependence of External Quantum Efficiency of fresh and degraded organic photovoltaics
Source abstract
Abstract
The effect of light intensity on the External Quantum Efficiency (EQE) of encapsulated bulk heterojunction organic photovoltaics (OPV) is presented. The measurements were applied to devices based on poly(3-hexylthiophene) (P3HT) blended with the fullerene derivative phenylC61-butyric acid methyl ester (PCBM) in as-produced and various degradation states. The degradation of current collection in the OPV devices is shown to enhance the sub-linear dependence of the short-circuit current on light intensity, and the corresponding EQE decrease with increasing incident light intensity. On the other hand, fresh cells and cells exposed to a low photon dose demonstrated an increase in the fullerene-related part of the EQE with increasing light intensity, i.e. a super-linear dependence of the photocurrent in this spectral range. Generation of traps in PCBM was proposed as the underlying mechanism for this effect. Perusal of our results suggests that (1) EQE dependence on the incident light intensity should be always taken into account in measuring spectral response of fresh OPV and especially of degraded devices; (2) intensity-dependent characterization provides an insight to the degradation mechanisms of OPV and can help to separate degradation in absorption/generation from degradation of the charge collection in the cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
2. Photocurrent spectroscopy for the investigation of charge carrier generation and transport mechanisms in organic p/n-junction solar cells10.1016/S0927-0248(99)00099-9 ↗
3. Temperature dependence for the photovoltaic device parameters of polymer–fullerene solar cells under operating conditions10.1063/1.1412270 ↗
4. Low-bandgap polymer photovoltaic cells10.1016/S0379-6779(00)01307-2 ↗
5. Accurate efficiency determination and stability studies of conjugated polymer/fullerene solar cells10.1016/S0040-6090(01)01589-9 ↗
6. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
7. Erroneous efficiency reports harm organic solar cell research10.1038/nphoton.2014.210 ↗
8. Accurate characterization of OPVs: device masking and different solar simulators10.1016/j.solmat.2012.11.020 ↗
9. ASTM Standard G173 − 03, 2012, Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface1, ASTM International, West Conshohocken, PA, 2012, DOI: 10.1520/G0173-03R12.10.1520/G0173-03R12 ↗
10. The effect of bias light on the spectral responsivity of organic solar cells10.1016/j.orgel.2012.09.040 ↗
11. Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells10.1002/polb.23214 ↗
12. White-light bias external quantum efficiency measurements of standard and inverted P3HT:PCBM photovoltaic cells10.1088/0022-3727/45/41/415101 ↗
13. The importance of fullerene percolation in the mixed regions of polymer–fullerene bulk heterojunction solar cells10.1002/aenm.201200637 ↗
14. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
15. Exciton dissociation and charge photogeneration in pristine and doped conjugated polymers10.1002/pssa.200404339 ↗
16. Exciton diffusion and dissociation in a poly(p-phenylenevinylene)/C-60 heterojunction photovoltaic cell10.1063/1.115797 ↗
17. On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses – the ISOS-3 inter-laboratory collaboration10.1039/c2cp40821j ↗
18. Effect of processing additive 1,8-octanedithiol on the lifetime of PCPDTBT based organic photovoltaics10.1016/j.orgel.2014.06.031 ↗
19. Effects of concentrated sunlight on organic photovoltaics10.1063/1.3298742 ↗
20. Concentrated sunlight for accelerated stability testing of organic photovoltaic materials: towards decoupling light intensity and temperature10.1016/j.solmat.2014.11.033 ↗
21. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
22. Galagan · Sol. Energy Mater. Sol. Cells · 2012 · 104 · 3210.1016/j.solmat.2012.04.039 ↗
23. Galagan · Adv. Energy Mater. · 2014 · 4 · 130049810.1002/aenm.201300498 ↗
24. F.V. Assche, H. Rooms, E. Young, J. Michels, T.V. Mol, G. Rietjens, P.V.D. Weijer, P. Bouten, Thin-film barrier on foil for organic LED lamps, in: Proceedings of AIMCAL Fall Technical Conference, Myrtle beach, SC, USA, 2008, pp. 1152–1173.
25. A high-irradiance solar furnace for photovoltaic characterization and nanomaterial synthesis10.1016/j.solmat.2010.11.030 ↗
26. Temperature dynamics of multijunction concentrator solar cells up to ultra-high irradiance10.1002/pip.1179 ↗
27. D. Faiman, D. Feuermann, P. Ibbetson, A. Zemel, A. Ianietz, V. Liubansky, I. Setter, A. Forshman, S. Suraqui, Data Processing for the Negev Radiation Survey: Part II–Typical Meteorological Year (TMY), Version 5, Israel Ministry of Energy and Water publication RD-20-12 (2012).
28. Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
29. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
30. Morphology and photochemical stability of P3HT:PCBM active layers of organic solar cells10.1051/epjap/2011110132 ↗
31. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
32. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
33. Large-area organic photovoltaic module – fabrication and performance10.1016/j.solmat.2008.11.018 ↗
34. Photovoltaic characterization of concentrator solar cells by localized irradiation10.1063/1.2266161 ↗
35. Origin of size effect on efficiency of organic photovoltaics10.1063/1.3567930 ↗
36. Study of organic photovoltaics by localized concentrated sunlight: towards optimization of charge collection in large-area solar cells10.1063/1.3656276 ↗
37. Reversible degradation in ITO-containing organic photovoltaics under concentrated sunlight10.1039/C4CP05571C ↗
38. Charge transport and photocurrent generation in poly (3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
39. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
40. The influence of the thickness, recombination and space charge on the loss of photocurrent in organic semiconductors: an analytical model10.1088/0022-3727/40/11/015 ↗
41. Analysis of the degradation mechanism of ITO-free organic solar cell under UV radiation10.1016/j.solmat.2013.10.021 ↗
42. Superlinear photovoltaic effect in Si nanocrystals based metal–insulator–semiconductor devices10.1063/1.3081410 ↗
43. Light induced degradation in amorphous silicon studied by surface photovoltage technique: a comparison of lifetime vs. space charge effects10.1063/1.341888 ↗
44. Influence of illumination conditions on the spectral response of amorphous silicon Schottky barrier structures10.1063/1.345027 ↗
45. Exciton dissociation and charge trapping at poly(3-hexylthiophene)/phenyl-C61-butyric acid methyl ester bulk heterojunction interfaces: photo-induced threshold voltage shifts in organic field-effect transistors and solar cells10.1063/1.4705277 ↗
46. Fullerene van der waals oligomers as electron traps10.1021/ja505949m ↗
47. The effect of PCBM dimerization on the performance of bulk heterojunction solar cells10.1002/aenm.201300693 ↗
48. Photochemical transformations in fullerene and molybdenum oxide affect the stability of bilayer organic solar cells10.1002/aenm.201400734 ↗
49. Effect of UV-ozone exposure on PCBM10.1109/JPHOTOV.2012.2183579 ↗