journal article·2018-02Open access

Outdoor organic photovoltaic module characteristics: Benchmarking against other PV technologies for performance, calculation of Ross coefficient and outdoor stability monitoring

N. Bristow, J. Kettle

Abstract

Abstract A comparison of performance parameters for first, second and third generation PV technologies has been conducted. Organic photovoltaic (OPV) modules displayed markedly different outdoor performance characteristics to other PV technologies owing to the positive temperature coefficient, lower thermal mass and response under low light conditions. The linear relationship between irradiance and module temperature rise above ambient is studied, leading to calculation of values for the Ross coefficient for OPV modules. OPVs are shown to possess a lower Ross coefficient than poly-Si, due to the lower absorption of infrared radiation. The effect of wind speed on the Ross coefficient is also investigated, showing the effect that module structure has upon outdoor PV performance, with the OPV module cooling quicker under windy conditions than the poly-Si due to a lower thermal mass. A long term stability study on OPV modules with a silver nanowire-zinc oxide (AgNW-ZnO) composite front electrode has showed two phases of degradation: a short initial burn-in with significant drops in performance; followed by stabilisation and degradation progressing at a much slower rate. During the burn-in period the modules showed diurnal reversible degradation in the short circuit current (ISC), whereas open circuit voltage (VOC) and fill factor (FF) show a steady decline. The reversible degradation is assumed to be related to the desorption of oxygen from the ZnO layer during the day due to UV excitation, leading to an increase in trap formation and a drop in current generation capacity, followed by re-adsorption of the oxygen overnight.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · solar cell performance optimization · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. International Energy Agency, Tracking Clean Energy Progress 2016, International Energy Agency Books Online, 2016). 〈http://www.iea.org/publications/freepublications/publication/TrackingCleanEnergyProgress2016.pdf〉.
2. Fraunhofer Institute for Solar Energy Systems, Photovoltaics Report, 2016. , 〈https://www.ise.fraunhofer.de/en/downloads-englisch/pdf-files-englisch/photovoltaics-report-slides.pdf〉.
3. Third generation photovoltaics10.1002/lpor.200810039 ↗
4. M.A. Green, Third generation photovoltaics: assessment of progress over the last decade, in: Proceedings of the 34th IEEE Photovolt. Spec. Conference, 2009, pp. 000146–000149. 〈http://dx.doi.org/10.1109/PVSC.2009.5411708〉.10.1109/PVSC.2009.5411708 ↗
5. Solar cell efficiency tables (version 48)
6. Heliatek Gmbh, Heliatek Sets new OPV World Record Efficiency of 13.2%, 2016.〈http://www.heliatek.com/en/press/press-releases/details/heliatek-sets-new-organic-photovoltaic-world-record-efficiency-of-13-2〉. (Accessed 25 June 2016).
7. The state of organic solar cells – a meta analysis10.1016/j.solmat.2013.05.034 ↗
8. Efficiency enhancement in organic photovoltaic cells: consequences of optimizing series resistance10.1002/adfm.200901107 ↗
9. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
10. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
11. Flexible organic P3HT: PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
12. Over 2 years of outdoor operational and storage stability of ITO-free, fully roll-to-roll fabricated polymer solar cell modules10.1002/ente.201500086 ↗
13. The critical choice of PEDOT:PSS additives for long term stability of roll-to-roll processed OPVs10.1002/aenm.201401912 ↗
14. Outdoor performance of organic photovoltaics: diurnal analysis, dependence on temperature, irradiance, and degradation10.1063/1.4906915 ↗
15. Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions10.1063/1.1412270 ↗
16. Effect of temperature and illumination on the electrical characteristics of polymer–fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
17. Effects of concentrated sunlight on organic photovoltaics10.1063/1.3298742 ↗
18. Comparative indoor and outdoor stability measurements of polymer based solar cells10.1038/s41598-017-01505-w ↗
19. Shell ST36 PV Module Specification, (n.d.). 〈http://www.atlantasolar.com/pdf/Shell/ShellST36_USv1.pdf〉. (Accessed 10 July 2016).
20. A comparative study of dye-sensitized solar cells added carbon nanotubes to electrolyte and counter electrodes10.1016/j.solmat.2009.11.030 ↗
21. Freely available OPV – the fast way to progress10.1002/ente.201300057 ↗
22. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
23. Fast inline roll-to-roll printing for indium-tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
24. Carbon: the ultimate electrode choice for widely distributed polymer solar cells10.1002/aenm.201400732 ↗
25. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules10.1039/C5NR07426F ↗
26. On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
27. V. Perraki, G. Tsolkas, Temperature Dependence on the Photovoltaic Properties of Selected Thin-film Modules 2. Effect of Temperature on the I-V Characteristics of PV Modules, 2, 2013, pp. 140–146. 〈http://dx.doi.org/10.11648/j.ijrse.20130204.12〉.10.11648/j.ijrse.20130204.12 ↗
28. An organic electronics primer10.1063/1.1995748 ↗
29. Impurity effects and temperature influence on the exciton dissociation dynamics in conjugated polymers10.1016/j.cplett.2013.06.065 ↗
30. Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells10.1016/S0013-4686(01)00540-0 ↗
31. Outdoor performance of large scale DSC modules10.1016/j.jphotochem.2003.11.022 ↗
32. Outdoor testing and degradation of dye-sensitized solar cells in Abu Dhabi10.1016/j.solmat.2014.05.048 ↗
33. R.G. Ross, Interface design considerations for terrestrial solar cell modules, in: Proceedings of the 12th IEEE Photovolt. Spec. Conference 1, 1976.
34. BiPV system performance and efficiency drops: overview on PV module temperature conditions of different module types10.1016/j.egypro.2014.02.148 ↗
35. A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting10.1016/j.solmat.2008.05.016 ↗
36. The effect of solar UV irradiance variations on the earth's atmosphere10.1023/A:1026771307057 ↗
37. Operating temperature of photovoltaic modules: a survey of pertinent correlations10.1016/j.renene.2008.04.009 ↗
38. Frederik C. Krebs, Private Communication, 2014.
39. Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests10.1016/j.solmat.2014.06.031 ↗
40. Reversible degradation of inverted organic solar cells by concentrated sunlight10.1088/0957-4484/22/22/225401 ↗
41. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
42. Three dimensional corrugated organic photovoltaics for building integration; improving the efficiency, oblique angle and diffuse performance of solar cells10.1039/C5EE02162F ↗