journal article·2017-01

Intermetallic compounds in solar cell interconnections: Microstructure and growth kinetics

Torsten Geipel, Monja Moeller, Johann Walter, Achim Kraft, Ulrich Eitner

Publisher page

Abstract

Abstract The microstructure and intermetallic phase growth in solder joints of photovoltaic modules are investigated because of their significance for interconnection reliability. Interconnector ribbons with Sn60Pb40, Sn62Pb36Ag2, Sn43Bi57, Sn41Bi57Ag2 and Sn91Zn9 are soldered on the front busbars of industrial crystalline silicon solar cells. Cross sections are inspected using microscopy, SEM and EDX. The interconnections are isothermally aged, whereas the intermetallic layer thickness is determined successively. The microstructural changes in the bonds are characterized. Grain coarsening, volume increase of intermetallic compounds, Sn-penetration into the metallization and growth of grain boundaries between the phases are found. The composition of the intermetallic phases within Sn91Zn9-bonds is discussed. A diffusion model is used to simulate the intermetallic layer growth after 3000 h at 85 °C and thermal cycling from −40 °C to 85 °C for 600 cycles. A prognosis of the phase growth within the photovoltaic module after 25 years at the location Freiburg in Germany is made. It is found that the Ag 3 Sn-phase using Sn43Bi57 extends to 6.6 µm after 3000 h at 85 °C as compared to 2.6 µm for Sn60Pb40. After 25 years in Freiburg the Ag 3 Sn-layer within Sn43Bi57 joints is predicted to be 2.4 µm whereas within Sn60Pb40-bonds only 2.2 µm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Crystalline silicon PV module technology
2. Thick-film technology: an introduction tothe materials10.1109/TCHMT.1980.1135609 ↗
3. Physical understanding of printed thick-film front contacts of crystalline Si solar cells – review of existing models and recent developments10.1016/j.solmat.2006.03.040 ↗
4. Photovoltaic module performance and durability following long-term field exposure10.1002/(SICI)1099-159X(200003/04)8:2<241::AID-PIP290>3.0.CO;2-D ↗
5. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
6. Effect of intermetallic compounds on the thermal fatigue of surface mount solder joints10.1109/96.554534 ↗
7. Intermetallic growth and mechanical behavior of low and high melting temperature solder alloys10.1007/BF02665483 ↗
8. A review on the interfacial intermetallic compounds between Sn-Ag-Cu based solders and substrates
9. S. Nieland, M. Baehr, A. Boettger, A. Ostmann, H. Reichl, Advantages of microelectronic packaging for low temperature lead free soldering of thin solar cells, in: Proccedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition, 2007, pp. 2467–2472.
10. Intermetallic phase growth and reliability of Sn-Ag-soldered solar cell joints10.1016/j.egypro.2012.07.126 ↗
11. Al/Ni : V/Ag metal stacks as rear-side metallization for crystalline silicon solar cells
12. Long-term and annealing stable, solderable PVD metallization with optimized Al diffusion barrier10.1016/j.egypro.2015.07.052 ↗
13. Growth kinetics of Ag3Sn in silicon solar cells with a sintered Ag metallization layer10.1016/j.solmat.2014.01.018 ↗
14. A. Faes, M. Despeisse, J. Levrat, J. Champliaud, N. Badel, M. Kiaee, T. Söderström, Y. Yao, R. Grischke, M. Gragert, J. Ufheil, P. Papet, B. Strahm, G. Cattaneo, J. Cattin, Y. Baumgartner, A. Hessler-Wyser, C. Ballif, Smartwire solar cell interconnection technology, in: Proceedings of the 29th European Photovoltaic Specialist Conference and Exhibition, 2014, pp. 2555–2561.
15. Characterizations of Cu/Sn-Zn solder/Ag interfaces on photovoltaic ribbon for silicon solar cells10.1109/JPHOTOV.2014.2373822 ↗
16. Klein Wassink · 1991
17. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
18. The effect of ageing on the microstructure of 60:40 tin-lead solders10.1108/eb037741 ↗
19. Tin-lead (SnPb) solder reaction in flip chip technology10.1016/S0927-796X(01)00029-8 ↗
20. Three-dimensional morphology of a very rough interface formed in the soldering reaction between eutectic SnPb and Cu10.1063/1.113975 ↗
21. Six cases of reliability study of Pb-free solder joints in electronic packaging technology10.1016/S0927-796X(02)00007-4 ↗
22. Dissolution and interface reactions between the 95.5Sn-3.9Ag-0.6Cu, 99.3Sn-0.7Cu, and 63Sn-37Pb solders on silver base metal10.1007/s11661-006-0099-6 ↗
23. Evans · 2007
24. Aging studies of Cu-Sn intermetallic compounds in annealed surface mount solder joints10.1109/96.575568 ↗
25. Growth kinetics of planar binary diffusion couples: “thin-film case” versus “bulk cases”10.1063/1.331028 ↗
26. Borg · 1988
27. Characterization of IMC layer and its effect on thermomechanical fatigue life of Sn-3.8Ag-0.7Cu solder joints10.1016/j.jallcom.2012.06.104 ↗
28. Intermetallic compound layer growth by solid state reactions between 58Bi-42Sn solder and copper10.1007/BF02655468 ↗
29. Statistical validation10.1016/0304-3800(93)90105-2 ↗
30. European Parliament and Council, Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (recast): Directive 2011/65/EU (3.1.2013).
31. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
32. Silver scavenging inhibition of some silver loaded solders
33. B. Lalaguna, P. Sánchez-Friera, I.J. Bennett, D. Sánchez, L.J. Caballero, Alonso J., Evaluation of bismuth-based solder alloys for low-stress interconnection of industrial crystalline silicon PV cells, in: Proccedings of the 22nd European Photovoltaic Solar Energy Conference and Exhibition, 2007, pp. 2712–2715.
34. 24.7%record efficiency HIT solar cell on thin silicon wafer10.1109/JPHOTOV.2013.2282737 ↗
35. Grain boundary effects on the mechanical properties of bismuth nanostructures10.1016/j.actamat.2011.04.017 ↗
36. Significantly improved mechanical properties of Bi-Sn Solder alloys by Ag-doping10.1007/s11664-997-0281-7 ↗
37. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
38. Effects of Ag content on the reliability of LED package component with Sn-Bi-Ag solder
39. Characterization of eutectic Sn-Bi solder joints10.1007/BF02655427 ↗
40. Sn-Zn low temperature solder
41. Wetting interaction between Sn-Zn-Ag Solders and Cu10.1007/s11664-003-0242-8 ↗
42. Reliability study of lead-free solders under specific conditions
43. Development of Sn-Zn lead-free solders bearing alloying elements
44. Thermodynamic reevaluation of the Cu-Zn system10.1007/BF02671961 ↗
45. Thermodynamic assessment of the Ag-Zn System10.1016/S0364-5916(98)00024-8 ↗
46. Growth of intermetallic compounds in the Sn-9Zn/Cu joint10.1007/s11664-006-0214-x ↗
47. Effect of Bi addition on the activation energy for the growth of Cu5Zn8 intermetallic in the Sn-Zn lead-free solder10.1016/j.intermet.2009.11.016 ↗
48. Role of Ag in the formation of interfacial intermetallic phases in Sn-Zn soldering10.1007/s11664-005-0270-7 ↗
49. MatWeb: Material Property Data, 〈www.matweb.com〉.
50. L.J. Caballero, P. Sanchez-Friera, B. Lalaguna, J. Alonso, M.A. Vazquez, Series resistance modelling of industrial screen-printed monocrystalline silicon solar cells and modules including the effect of spot soldering, in: Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, vol. 2, IEEE, 2006, pp. 1388–1391. 〈http://dx.doi.org/10.1109/WCPEC.2006.279710〉.10.1109/WCPEC.2006.279710 ↗
51. Reduction of thermomechanical stress using electrically conductive adhesives10.1016/j.egypro.2015.07.049 ↗
52. Strain rate dependence on nanoindentation responses of interfacial intermetallic compounds in electronic solder joints with Cu and Ag substrates10.2320/matertrans.M2009016 ↗
53. Metallographic sample preparation of soldered solar cells10.3139/147.110129 ↗
54. The Ag-Sn (Silver-Tin) system10.1007/BF02869270 ↗
55. IEC, 61215: 2005-04 Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval, 2005.
56. On the Sn-Bi-Ag ternary phase diagram10.1007/BF02653345 ↗
57. A microstructural study of the thermal fatigue failures of 60Sn-40Pb solder joints10.1007/BF02652148 ↗
58. Effect of intermetallic compounds on fracture behaviors of Sn3.0Ag0.5Cu lead-free solder joints during in situ tensile test
59. M.A. Quintana, D.L. King, T.J. McMahon, C.R. Osterwald, Commonly observed degradation in field-aged photovoltaic modules, in: Proceedings of the Conference Record of the 29th IEEE Photovoltaic Specialist Conference, 2002, pp. 1436–1439. 〈http://dx.doi.org/10.1109/PVSC.2002.1190879〉.10.1109/PVSC.2002.1190879 ↗
60. U. Itoh, T. Nishimura, T. Fukami, K. Takamura, A. Kita, R. Miyabayashi, Solder joint failure modes in crystalline Si PV modules operated in Tsukuba, Japan for 10 years, in: Proceedings of the 40th IEEE Photovoltaic Specialist Conference, 2014, p. 2021.10.1109/PVSC.2014.6925323 ↗
61. Durability of Pb-free solder between copper interconnect and silicon in photovoltaic cells10.1002/pip.944 ↗
62. Influence of metallic diffusion on the adhesion of screen printed silver films10.1007/BF02811597 ↗
63. Thick film conductor adhesion reliability
64. Enhanced property thick-film conductor pastes
65. Progress in and technology of low-cost silver containing thick-film conductors10.1109/TCHMT.1980.1135648 ↗
66. Origin of damp-heat induced cell degradation10.1016/j.solmat.2013.03.022 ↗
67. Investigation of acetic acid corrosion impact on printed solar cell contacts10.1109/JPHOTOV.2015.2395146 ↗
68. Growth and morphology of the intermetallic compounds formed at the Sn-9Zn-2.5Ag/Cu interface10.1016/j.jallcom.2005.04.141 ↗
69. The meaning and use of the Arrhenius activation energy10.1002/anie.196904381 ↗