journal article·2020-06

Ammoniated aqueous precursor ink processed copper iodide as hole transport layer for inverted planar perovskite solar cells

Dhruba B. Khadka, Yasuhiro Shirai, Masatoshi Yanagida, Kenjiro Miyano

Publisher page

Abstract

Abstract The inorganic carrier transport layers are robust and stable to the environment compared to the organic hole transport layer (HTL). Here, we report on the fabrication of the halide perovskite solar cells (HaPSCs) employing CuI deposited with ammoniated aqueous solution ink as HTL and explored the material properties and device characteristics. The film morphology of CuI is found to have an influence on the HaP film growth and hence effects on the device parameters. The HaPSC with CuI has demonstrated the power conversion efficiency of ~14.21% with high reproducibility. The capacitance spectra analysis shows that the deep trap states are induced in the perovskite absorber layer. The results obtained from the temperature-dependent open circuit voltage implicates that the recombination activities in the perovskite bulk are dominant. Furthermore, the HaPSC with CuI has revealed better air stability compared to the device with PEDOT:PSS. This work suggests that the CuI processed with aqueous precursor is a promising alternative HTL to PEDOT:PSS for efficient and stable perovskite solar cells as well as in a tandem device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Hybrid organic-inorganic perovskites: low-cost semiconductors with intriguing charge-transport properties10.1038/natrevmats.2015.7 ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Polyelemental, multicomponent perovskite semiconductor libraries through combinatorial screening10.1002/aenm.201803754 ↗
4. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
5. Hole-transport materials for perovskite solar cells10.1002/anie.201601757 ↗
6. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
7. Highly stable semi-transparent MAPbI3 perovskite solar cells with operational output for 4000 h10.1016/j.solmat.2019.03.004 ↗
8. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
9. Unraveling the impacts induced by organic and inorganic hole transport layers in inverted halide perovskite solar cells10.1021/acsami.8b20924 ↗
10. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
11. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
12. Zinc as a new dopant for NiO x -based planar perovskite solar cells with stable efficiency near 20%10.1021/acsaem.8b00671 ↗
13. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
14. Minimizing the energy loss of perovskite solar cells with Cu+ doped NiOx processed at room temperature10.1016/j.solmat.2018.01.025 ↗
15. A 19.0% efficiency achieved in CuO x -based inverted CH 3 NH 3 PbI 3−x Cl x solar cells by an effective Cl doping method10.1016/j.nanoen.2016.06.044 ↗
16. Introducing Cu2O thin films as a hole-transport layer in efficient planar perovskite solar cell structures10.1021/acs.jpcc.5b11540 ↗
17. Cesium-doped vanadium oxide as the hole extraction layer for efficient perovskite solar cells10.1021/acsomega.7b01944 ↗
18. Highly efficient organic solar cells based on a robust room-temperature solution-processed copper iodide hole transporter10.1016/j.nanoen.2015.07.018 ↗
19. Solution-processed copper iodide as an inexpensive and effective anode buffer layer for polymer solar cells10.1021/jp412784q ↗
20. Fabrication of dye-sensitized solar cells using triethylamine hydrothiocyanate as a CuI crystal growth inhibitor10.1021/la020421p ↗
21. Room-temperature synthesized copper iodide thin film as degenerate p-type transparent conductor with a boosted figure of merit10.1073/pnas.1613643113 ↗
22. An inorganic hole conductor for Organo-lead halide perovskite solar cells. improved hole conductivity with copper iodide10.1021/ja411014k ↗
23. One plus one greater than two: high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer10.1039/C8TA07332E ↗
24. Identification and mitigation of a critical interfacial instability in perovskite solar cells employing copper thiocyanate hole-transporter10.1002/admi.201600571 ↗
25. CuSCN-based inverted planar perovskite solar cell with an average PCE of 15.6%10.1021/acs.nanolett.5b00116 ↗
26. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications10.1039/C8CS00656C ↗
27. Low-cost solution-processed copper iodide as an alternative to PEDOT: PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells10.1039/C5TA05286F ↗
28. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗
29. Thermal stability of CuSCN hole conductor‐based perovskite solar cells10.1002/cssc.201600957 ↗
30. Unraveling the impacts induced by organic and inorganic hole transport layers in inverted halide perovskite solar cells10.1021/acsami.8b20924 ↗
31. Enhancement in efficiency and optoelectronic quality of perovskite thin films annealed in MACl vapor10.1039/C7SE00033B ↗
32. Transparent conductive CuI thin films prepared by pulsed laser deposition
33. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization10.1038/ncomms8586 ↗
34. Room-temperature and solution-processable Cu-doped nickel oxide nanoparticles for efficient hole-transport layers of flexible large-area perovskite solar cells10.1021/acsami.7b13621 ↗
35. Tailoring the film morphology and interface band offset of caesium bismuth iodide-based Pb-free perovskite solar cells10.1039/C9TC02181G ↗
36. The impact of energy alignment and interfacial recombination on the internal and external open-circuit voltage of perovskite solar cells10.1039/C9EE02020A ↗
37. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
38. Exploring the effects of interfacial carrier transport layers on device performance and optoelectronic properties of planar perovskite solar cells10.1039/C7TC02822A ↗
39. Observable hysteresis at low temperature in “hysteresis free” organic-inorganic lead halide perovskite solar cells10.1021/acs.jpclett.5b01381 ↗
40. Identifying fundamental limitations in halide perovskite solar cells10.1002/adma.201505480 ↗
41. Degradation of encapsulated perovskite solar cells driven by deep trap states and interfacial deterioration10.1039/C7TC03733C ↗
42. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
43. A nonvacuum approach for fabrication of Cu2ZnSnSe4/In2S3 thin film solar cell and optoelectronic characterization characterization10.1021/acs.jpcc.5b03193 ↗
44. Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells10.1038/ncomms8348 ↗
45. Minimal effect of the hole-transport material ionization potential on the open-circuit voltage of perovskite solar cells10.1021/acsenergylett.6b00270 ↗
46. Interface-induced crystalline ordering and favorable morphology for efficient annealing-free poly(3-hexylthiophene): fullerene derivative solar cells10.1021/am3017653 ↗