journal article·2019-10Open access

Efficient indoor p-i-n hybrid perovskite solar cells using low temperature solution processed NiO as hole extraction layers

Lethy Krishnan Jagadamma, Oskar Blaszczyk, Muhammad T. Sajjad, Arvydas Ruseckas, Ifor D.W. Samuel

Abstract

Hybrid perovskites have received tremendous attention due to their exceptional photovoltaic and optoelectronic properties. Among the two widely used perovskite solar cell device architectures of n-ip and p-i-n, the latter is interesting in terms of its simplicity of fabrication and lower energy input. However this structure mostly uses PEDOT:PSS as a hole transporting layer which can accelerate the perovskite solar cell degradation. Hence the development of stable, inorganic hole extraction layers (HEL), without compromising the simplicity of device fabrication is crucial in this fast-growing photovoltaic field. Here we demonstrate a low temperature (~100 oC) solution - processed and ultrathin (~ 6 nm) NiO nanoparticle thin films as an efficient HEL for CH3NH3PbI3 based perovskite solar cells. We measure a power conversion efficiency (PCE) of 13.3 % on rigid glass substrates and 8.5 % on flexible substrates. A comparison with PEDOT:PSS based MAPbI3 solar cells (PCE ~ 7.9 %) shows that NiO based solar cells have higher short circuit current density and improved open circuit voltage (1.03V). Apart from the photovoltaic performance under 1 Sun, the efficient hole extraction property of NiO is demonstrated for indoor lighting as well with a PCE of 23.0 % for NiO based CH3NH3PbI2.9Cl0.1 p-i-n solar cells under compact fluorescent lighting. Compared to the perovskite solar cells fabricated on PEDOT:PSS HEL, better shelf-life stability is observed for perovskite solar cells fabricated on NiO HEL. Detailed microstructural and photophysical investigations imply uniform morphology, lower recombination losses, and improved charge transfer properties for CH3NH3PbI3 grown on NiO HEL.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. NREL Chart, in, June 2019.
2. Perovskite-based solar cells: impact of morphology and device architecture on device performance10.1039/C4TA05226A ↗
3. Organohalide lead perovskites for photovoltaic applications10.1039/C4EE00942H ↗
4. Not all that glitters is gold: metal-migration-induced degradation in perovskite solar cells10.1021/acsnano.6b02613 ↗
5. Recent advances in the inverted planar structure of perovskite solar cells10.1021/acs.accounts.5b00404 ↗
6. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
7. Progress in hole-transporting materials for perovskite solar cells10.1016/j.jechem.2017.12.017 ↗
8. Inorganic p-type semiconductors: their applications and progress in dye-sensitized solar cells and perovskite solar cells
9. NiOx hole transport layer for perovskite solar cells with improved stability and reproducibility10.1021/acsomega.7b00538 ↗
10. Improved efficiency of NiOx-based p-i-n perovskite solar cells by using PTEG-1 as electron transport layer10.1063/1.4992783 ↗
11. Sol-gel-processed yttrium-doped NiO as hole transport layer in inverted perovskite solar cells for enhanced performance10.1016/j.apsusc.2018.01.236 ↗
12. Improving the efficiency and environmental stability of inverted planar perovskite solar cells via silver-doped nickel oxide hole-transporting layer10.1016/j.apsusc.2017.08.184 ↗
13. High-performance inverted planar perovskite solar cells based on efficient hole-transporting layers from well-crystalline NiO nanocrystals10.1016/j.solener.2017.12.045 ↗
14. High-performance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells10.1002/anie.201405176 ↗
15. p-type Li, Cu-codoped NiOx hole-transporting layer for efficient planar perovskite solar cells10.1364/OE.24.0A1349 ↗
16. p-Type mesoscopic nickel oxide/organometallic perovskite heterojunction solar cells10.1038/srep04756 ↗
17. Nickel oxide electrode interlayer in CH3NH3PbI3 perovskite/PCBM planar-heterojunction hybrid solar cells10.1002/adma.201306217 ↗
18. Interface engineering with NiO nanocrystals for highly efficient and stable planar perovskite solar cells10.1016/j.electacta.2018.10.032 ↗
19. Dual interfacial modification engineering with p-type NiO nanocrystals for preparing efficient planar perovskite solar cells10.1039/C8TC04475A ↗
20. Synthesis and characterization of optically transparent nickel oxide nanoparticles as a hole transport material for hybrid perovskite solar cells10.1007/s10854-019-00927-8 ↗
21. Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells10.1039/C7TA01593C ↗
22. Latest advances in substrates for flexible electronics10.1889/1.2825093 ↗
23. Room-temperature and solution-processable Cu-doped nickel oxide nanoparticles for efficient hole-transport layers of flexible large-area perovskite solar cells10.1021/acsami.7b13621 ↗
24. Understanding the doping effect on NiO: toward high-performance inverted perovskite solar cells10.1002/aenm.201703519 ↗
25. Perovskite photovoltaics for dim-light applications10.1002/adfm.201503448 ↗
26. Highly efficient perovskite solar cells for light harvesting under indoor illumination via solution processed SnO2/MgO composite electron transport layers10.1016/j.nanoen.2018.04.027 ↗
27. Efficient light harvesting from flexible perovskite solar cells under indoor white light-emitting diode illumination10.1007/s12274-016-1402-5 ↗
28. Outstanding indoor performance of perovskite photovoltaic cells – effect of device architectures and interlayers10.1002/solr.201800207 ↗
29. Interface modification by ionic liquid: a promising candidate for indoor light harvesting and stability improvement of planar perovskite solar cells10.1002/aenm.201801509 ↗
30. Roadmap and roadblocks for the band gap tunability of metal halide perovskites10.1039/C7TA00404D ↗
31. A ternary blend of a polymer, fullerene, and insulating self-assembling triptycene molecules for organic photovolatics10.1039/C6TA07705F ↗
32. Liquid-feed flame spray pyrolysis as a method of producing mixed-metal oxide nanopowders of potential interest as catalytic materials. Nanopowders along the NiO−Al2O3 tie line including (NiO)0.22(Al2O3)0.78, a new inverse spinel composition10.1021/cm0503026 ↗
33. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
34. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
35. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
36. Simulation of perovskite solar cell with P3HT hole-transporting materials
37. Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells10.1038/ncomms15330 ↗
38. Interface engineering of perovskite solar cells with multifunctional polymer interlayer toward improved performance and stability10.1016/j.jpowsour.2017.12.082 ↗
39. Probing the energy levels of perovskite solar cells via Kelvin probe and UV ambient pressure photoemission spectroscopy10.1039/C6CP02446G ↗
40. Surface photovoltage spectroscopy study of organo-lead perovskite solar cells10.1021/jz501163r ↗
41. Maximum efficiencies of indoor photovoltaic devices10.1109/JPHOTOV.2012.2225023 ↗
42. Organic photovoltaics for low light applications10.1016/j.solmat.2011.07.011 ↗
43. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
44. Hybrid perovskite/perovskite heterojunction solar cells10.1021/acsnano.6b01535 ↗