Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S,Se)4 solar cells
Source abstract
Abstract
Abstract Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) shows great promise in thin film photovoltaic application due to its reasonable band gap, low cost and non-toxic earth-abundant composition. Post-selenization is the generally adopted approach to obtain CZTSSe film with large-grain size. Thoroughly understanding and well controlling the grain growth process during selenization is thus essential for achieving high-performance solar cell devices. Here we demonstrate that the absorber microstructure can be adjusted by altering selenization conditions, especially the heating rate and annealing time. It is found that heating rate determines formation manner of top CZTSSe layer, while annealing time affects both the crystallization degree of bottom CZTSSe layer and the selenization of Mo contact layer. Properly adjusting the annealing time at an optimized heating rate is proven to successfully eliminate the fine-grain layer and obtain high quality CZTSSe thin films with large-size grains. Based on the observations, growth mechanisms for the microstructure development during selenization of solution processed Cu2ZnSnS4 films are suggested. Finally, CZTSSe device efficiency of 9.24% is achieved at an optimal selenization condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. High-efficiency solar cell with earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
2. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
3. Eliminating fine-grained layers in Cu(In,Ga)(S,Se)2 thin films for solution-processed high efficiency solar cells10.1039/C6TA05728D ↗
4. Band bending near grain boundaries of Cu2ZnSn(S,Se)4 thin films and its effect on photovoltaic performance10.1016/j.nanoen.2018.06.032 ↗
5. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
6. 11.2% Efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
7. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
8. 8% Efficient Cu2ZnSn(S,Se)4 solar cells from redox equilibrated simple precursors in DMSO10.1002/aenm.201301823 ↗
9. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors10.1002/aenm.201703295 ↗
10. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
11. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
12. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells10.1039/C7EE01405H ↗
13. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
14. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
15. Synergistic effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency10.1002/aenm.201802540 ↗
16. Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
17. Facile and low-cost sodium-doping method for high-efficiency Cu2ZnSnSe4 thin film solar cells10.1021/acs.jpcc.5b06381 ↗
18. Real-time observation of Cu2ZnSn(S,Se)4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
19. Investigation of local compositional uniformity in Cu2ZnSn(S,Se)4 thin film solar cells prepared from nanoparticle inks10.1039/C4TA02205J ↗
20. Cu2ZnSn(S,Se)4 thin film absorbers based on ZnS, SnS and Cu3SnS4 nanoparticle inks: enhanced solar cells performance by using a two-step annealing process10.1016/j.solmat.2014.08.024 ↗
21. Effect of nanocrystal size and carbon on grain growth during annealing of copper zinc tin sulfide nanocrystal coatings10.1021/acs.chemmater.6b05058 ↗
22. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
23. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
24. 9.0% Efficient Cu2ZnSn(S,Se)4 solar cells from selenized nanoparticle inks10.1002/pip.2472 ↗
25. Effects of selenium atmosphere on grain growth for CZTSe absorbers fabricated by selenization of as-sputtered precursors10.1016/j.jallcom.2018.04.311 ↗
26. Significantly enhancing back contact adhesion and improving stability of Cu2(Zn,Cd)Sn(S,Se)4 solar cell by a rational carbon doping strategy10.1016/j.jallcom.2017.03.281 ↗
27. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
28. Pre-annealing induced oxide barrier to suppress the over-selenization of Mo contact10.1007/s10854-016-5238-2 ↗
29. Optimization of DMSO-based precursor solution by H2O additive for performance enhancement of kesterite photovoltaic devices10.1016/j.solmat.2018.02.001 ↗
30. Enhancing open-circuit voltage of solution-processed Cu2ZnSn(S,Se)4 solar cells with Ag substitution10.1109/JPHOTOV.2017.2675993 ↗
31. Raman scattering quantitative analysis of the anion chemical composition in kesterite Cu2ZnSn(SxSe1-x)4 solid solutions10.1016/j.jallcom.2014.12.175 ↗
32. Secondary crystalline phases identification in CuZnSnSe thin films: contributions from Raman scattering and photoluminescence10.1007/s10853-014-8446-2 ↗
33. The three A symmetry Raman modes of kesterite in Cu2ZnSnSe410.1364/OE.21.00A695 ↗
34. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
35. Effects of sodium on electrical properties in Cu2ZnSnS4 single crystal10.1063/1.4871208 ↗
36. Effects of Na incorporation on electrical properties of Cu(In,Ga)Se2-based photovoltaic devices on polyimide substrates10.1016/j.solmat.2014.05.009 ↗