Improved performance of dye sensitized solar cell via fine tuning of ultra-thin compact TiO 2 layer
Source abstract
Abstract
Abstract The role of properties of ultra-thin TiO2 compact layers (c-TiO2) deposited on fluorine-doped tin oxide (FTO) substrates, as a function of their thickness, has been studied by using electrochemical and optical techniques as well as surface morphology. The performance of films of thicknesses varying from 7 nm to 20 nm was compared with TiO2 films having a constant thickness (7 nm) prepared with different precursor concentrations. The surface morphology of the compact layer was investigated using field emission scanning electron microscope (FESEM) and it was observed that a film thickness less than 10 nm was sufficient to serve as a compact layer in the fabrication of dye sensitized solar cells (DSSCs). The power conversion efficiency (ɳ) of devices was found to be similar for a compact layer of thickness of 10 nm and observed to degrade for thicknesses >10 nm. This was attributed to the combined effect of optical transmittance, morphology, conductivity and position of Fermi level. Further, for devices prepared with compact layer of constant thickness (7 nm), a significant improvement in the ɳ (5.2%) is obtained for DSSCs prepared using 10 mM precursor concentration. The improvement in the ɳ is attributed to the facile transport as well as proper position of Fermi level without compromising optical and morphological properties. The analyses suggest that properties of the thin TiO2 compact layer play a significant role in the photovoltaic properties of DSSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Enhanced charge collection efficiency by thin-TiO2-film deposition on FTO-coated ITO conductive oxide in dye-sensitized solar cells10.1039/b926145a ↗
2. Role of temperature in the recombination reaction on dye-sensitized solar cells10.1039/C5CP02942B ↗
3. How does back-reaction at the conducting glass substrate influence the dynamic photovoltage response of nanocrystalline dye-sensitized solar cells?10.1021/jp0407270 ↗
4. Characterization of titanium dioxide blocking layers in dye-sensitized nanocrystalline solar cells10.1021/jp030790+ ↗
5. Electrochemical formation of transparent nanostructured TiO2 film as an effective bifunctional layer for dye-sensitized solar cells10.1039/c0cc04888g ↗
6. Ultrathin SnO2 layer for efficient carrier collection in dye-sensitized solar cells10.1016/j.tsf.2014.01.008 ↗
7. Fabrication and characterization of thin Nb2O5 blocking layers for ionic liquid-based dye-sensitized solar cells10.1016/j.jphotochem.2006.11.028 ↗
8. The blocking effect of charge recombination by sputtered and acid-treated ZnO thin film in dye-sensitized solar cells10.1016/j.jphotochem.2012.08.016 ↗
9. Interface functionalization of photoelectrodes with graphene for high performance dye-sensitized solar cells10.1002/adfm.201201126 ↗
10. TiO2 sol–gel blocking layers for dye-sensitized solar cells10.1016/j.crci.2005.02.052 ↗
11. Implication of device functioning due to back reaction of electrons via the conducting glass substrate in dye sensitized solar cells10.1063/1.2149215 ↗
12. Highly compact TiO 2 layer for efficient hole-blocking in perovskite solar cells10.7567/APEX.7.052301 ↗
13. The effect of TiCl4-treated TiO2 compact layer on the performance of dye-sensitized solar cell10.1016/j.cap.2011.10.011 ↗
14. Carrier leakage blocking effect of high temperature sputtered TiO2 film on dye-sensitized mesoporous photoelectrode10.1016/j.tsf.2007.03.079 ↗
15. Influences of deposition and post-annealing temperatures on properties of TiO2 blocking layer prepared by spray pyrolysis for solid-state dye-sensitized solar cells10.1016/j.tsf.2011.06.012 ↗
16. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
17. Systematic investigation of the role of compact TiO2 layer in solid state dye-sensitized TiO2 solar cells10.1016/j.ccr.2004.02.008 ↗
18. Control of Solid-State Dye-Sensitized Solar Cell Performance by Block-Copolymer-Directed TiO2 Synthesis10.1002/adfm.200902089 ↗
19. Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance10.1038/nature11936 ↗
20. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
21. High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
22. Performance improvement of CdS quantum dots sensitized TiO 2 solar cells by introducing a dense TiO 2 blocking layer10.1088/0022-3727/41/10/102002 ↗
23. TiO2 compact layers prepared by low temperature colloidal synthesis and deposition for high performance dye-sensitized solar cells10.1016/j.electacta.2012.01.092 ↗
24. The role of insulating oxides in blocking the charge carrier recombination in dye-sensitized solar cells10.1002/adfm.201302352 ↗
25. Co-sensitization of N719 and RhCL dyes on carboxylic acid treated TiO2 for enhancement of light harvesting and reduced recombination10.1016/j.orgel.2013.07.020 ↗
26. Size and shape fine-tuning of SnO2 nanoparticles for highly efficient and stable dye-sensitized solar cells10.1039/c3ta12279d ↗
27. Preparation of ITO thin films by sol-gel process and their characterizations10.1016/j.synthmet.2005.07.219 ↗
28. Charge transfer reductive doping of single crystal TiO2 anatase10.1016/j.jelechem.2003.11.013 ↗
29. Electrodeposited Ultrathin TiO2 Blocking Layers for Efficient Perovskite Solar Cells10.1038/srep16098 ↗
30. Sol–Gel titanium dioxide blocking layers for dye-sensitized solar cells: electrochemical characterization10.1002/cphc.201400026 ↗
31. Electrochemical monitoring of TiO2 atomic layer deposition by chronoamperometry and scanning electrochemical microscopy10.1021/cm401635v ↗
32. Theory of stationary electrode polarography. single scan and cyclic methods applied to reversible, irreversible, and kinetic systems10.1021/ac60210a007 ↗
33. Effects of catalyst material and atomic layer deposited TiO2 oxide thickness on the water oxidation performance of metal-insulator-silicon anodes10.1039/c3ee41178h ↗
34. Higher open circuit voltage and reduced UV-induced reverse current in ZnO-based solar cells by a chemically modified blocking layer10.1021/jp5004209 ↗
35. Modifying randles circuit for analysis of polyoxometalate layer-by-layer films10.1021/jp105075t ↗
36. Mott‐Schottky analysis of nanometer‐scale thin‐film anatase TiO210.1149/1.1837668 ↗
37. On the interpretation of Mott‐Schottky plots determined at semiconductor/electrolyte systems10.1149/1.2134298 ↗
38. Mott-Schottky analysis of nanoporous semiconductor electrodes in dielectric state deposited on SnO2(F) conducting substrates10.1149/1.1568741 ↗
39. Using TiO2 as a conductive protective layer for photocathodic H2 evolution10.1021/ja309523t ↗
40. Electrochemical characterization of TiO2 blocking layers for dye-sensitized solar cells10.1021/jp4103614 ↗
41. Peter · 2016 · 1
42. Mott–Schottky analysis of thin ZnO films10.1116/1.582406 ↗
43. Effect of thickness of ALD grown TiO2 films on photoelectrocatalysis10.1016/j.jphotochem.2009.03.019 ↗
44. Measurement method for carrier concentration in TiO2 via the Mott–Schottky approach10.1016/j.tsf.2010.10.071 ↗
45. Optimized TiO2 blocking layer for dye-sensitized solar cells10.1016/j.ceramint.2014.03.060 ↗
46. Ultrathin buffer layers of SnO2 by atomic layer deposition: perfect blocking function and thermal stability10.1021/acs.jpcc.6b09965 ↗
47. Enhanced photovoltaic properties in dye sensitized solar cells by surface treatment of SnO2 photoanodes10.1038/srep23312 ↗
48. Efficiency enhancement in dye sensitized solar cells using dual function mesoporous silica as scatterer and back recombination inhibitor10.1016/j.cplett.2016.06.071 ↗
49. Molecular modification on dye-sensitized solar cells by phosphonate self-assembled monolayers10.1039/C1JM12317C ↗
50. Impedance spectroscopy analysis of the effect of TiO2 blocking layers on the efficiency of dye sensitized solar cells10.1021/jp301694r ↗
51. Modeling of an equivalent circuit for dye-sensitized solar cells10.1063/1.1690495 ↗
52. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗
53. Dye-sensitized solar cells10.1021/cr900356p ↗
54. Electron lifetime in dye-sensitized solar cells: theory and interpretation of measurements10.1021/jp9037649 ↗
55. Electron transport and recombination in ZnO-based dye-sensitized solar cells10.1021/jp206698t ↗
56. Effect of blocking layer to boost photoconversion efficiency in ZnO dye-sensitized solar cells10.1021/am501360a ↗
57. Electron transport in dye-sensitized solar cells based on ZnO nanotubes: evidence for highly efficient charge collection and exceptionally rapid dynamics10.1021/jp810406q ↗
58. An efficient and low-cost TiO2 compact layer for performance improvement of dye-sensitized solar cells10.1016/j.electacta.2008.09.025 ↗
59. Control of dark current in photoelectrochemical (TiO2/I--I3-) and dye-sensitized solar cells10.1039/b505718c ↗
60. Deposition of a thin film of TiOx from a titanium metal target as novel blocking layers at conducting glass/TiO2 interfaces in ionic liquid mesoscopic TiO2 dye-sensitized solar cells10.1021/jp064327j ↗
61. Photoelectrochemical properties of the Zn‐Ti‐Fe spinel oxides10.1149/1.2108660 ↗