High efficiency cadmium free Cu(In,Ga)Se2 thin film solar cells terminated by an electrodeposited front contact
Source abstract
Abstract
Abstract The possibility to reach up to 14.7% efficiency with Cu(In,Ga)Se2 (CIGS) solar cell, using a cadmium free buffer layer (indium sulphide:In2S3) and an electrodeposited front contact (chloride doped ZnO:ZnO:Cl) is demonstrated in this article. This is the first time that costly gas phase deposition processes for ZnO, by high vacuum sputtering, can be replaced by an efficient low cost atmospheric technology, representing an important breakthrough in further cost reduction for photovoltaic application. In addition, the compatibility with cadmium free buffer layers brings this new approach at the cutting edge of strategic evolution of the CIGS technology. In this study the influences of the In2S3 buffer layer thickness, the presence of an intrinsic ZnO layer and a soft annealing treatment are studied. It is shown that the growth behavior of the electrodeposited ZnO:Cl is controlled by nucleation phenomena on different surfaces, with a unique morphology on indium sulphide. Finally the best performances have been achieved with a cell annealed at 150 °C under atmospheric conditions containing a very thin In2S3 layer (15 nm) but without intrinsic ZnO (CIGS/In2S3/ZnO:Cl).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Electrodeposition of In–Se and Ga–Se thin films for preparation of CIGS solar cells10.1149/1.3079481 ↗
2. Chalcopyrite thin film solar cells by electrodeposition10.1016/j.solener.2004.05.024 ↗
3. Non-vacuum processing of CuIn1−xGaxSe2 solar cells on rigid and flexible substrates using nanoparticle precursor inks10.1016/S0040-6090(03)00253-0 ↗
4. CIGSS films prepared by sol–gel route10.1016/j.tsf.2008.10.104 ↗
5. Mechanism of chemical bath deposition of cadmium sulfide thin films in the ammonia–thiourea system10.1149/1.2221111 ↗
6. Solar cells and modules by electrodeposition10.1016/j.tsf.2004.11.200 ↗
7. Cathodic electrodeposition from aqueous solution of dense or open-structured zinc oxide films10.1002/adma.19960080216 ↗
8. Electrocrystallization of epitaxial ZnO onto Gallium nitride10.1021/cm020349g ↗
9. Transparent zinc oxide films prepared by electrochemical reaction10.1063/1.116160 ↗
10. Temperature effects on ZnO electrodeposition10.1016/j.electacta.2004.10.007 ↗
11. D. Lincot, B. Canava, S. Quenet, S. Peulon, H.W. Schock, Electrodeposited zinc oxide: a new window layer for copper indium diselenide solar cells, in: Proceedings of the 14th European Photovoltaic Solar Energy Conference, 1997, pp. 2168–2171.
12. Extrinsic doping of electrodeposited zinc oxide films by chlorine for transparent conductive oxide applications10.1021/cm802765c ↗
13. J. Rousset, D. Lincot, Low temperature electrodeposition of zinc oxide layers as transparent conductive oxide window layers for CIGS solar cells, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference, vol. 1–3, 2009, pp. 698–703.10.1109/PVSC.2009.5411242 ↗
14. J. Rousset, E. Saucedo, K. Herz, D. Lincot, High efficiency CIGS-based solar cells with electrodeposited ZnO:Cl as transparent conducting oxide front contact, Prog. Photovolt.: Res. Appl., in press. 10.1002/pip.1061.
15. Alternative buffers for chalcopyrite solar cells10.1016/j.solener.2004.06.018 ↗
16. M.A. Contreras, T. Nakada, A.O. Pudov, R. Sites, ZnO/ZnS(O,OH)/Cu(In,Ga)Se2/Mo solar cell with 18.6% efficiency, in: Proceedings of the Third World Conference of Photovoltaic Energy Conversion, 2003, pp. 570–573.
17. Large-area Cd-free CIGS solar modules with In2S3 buffer layer deposited by ALCVD10.1016/j.tsf.2003.10.090 ↗
18. A novel cadmium free buffer layer for Cu(In,Ga)Se2 based solar cells10.1016/0927-0248(96)80009-2 ↗
19. Electrodeposited In2S3 buffer layers for CuInS2 solar cells10.1016/j.solmat.2008.04.022 ↗
20. Structural and optical studies on thermal-annealed In2S3 films prepared by the chemical bath deposition technique10.1016/j.tsf.2004.05.096 ↗
21. Far Infrared and Raman Optical Study of α- and β-In2S3 compounds10.1002/pssb.2221050132 ↗
22. Growth studies and characterisation of In2S3 thin films deposited by atomic layer deposition10.1016/j.apsusc.2003.08.011 ↗
23. Opto-electronic properties of rough LP-CVD ZnO: B for use as TCO in thin-film silicon solar cells10.1016/j.tsf.2007.03.130 ↗
24. Study on ALD In2S3/Cu(In,Ga)Se2 interface formation10.1002/pip.595 ↗