Morphology controlled bulk-heterojunction layers of fully electro-spray coated organic solar cells
Source abstract
Abstract
Abstract Electro-spray (e-spray) is emerging as an attractive printing method for the thin-film fabrication of organic materials because of the simple apparatus and its high efficiency. Here, we demonstrate a fully e-sprayed organic solar cell (OSC) with high performance by using an additive in the poly(3-hexylthiophene):[6,6]-phenyl C 61 -butyric acid methyl ester (P3HT:PCBM) layer without any post-processing treatment. The P3HT:PCBM film fabricated with 6 vol% 1,8-diiodooctane (DIO) showed improved surface macro- and nano-morphologies, which resulted in an enhanced photovoltaic performance. Using optimized conditions, we obtained a 2.98% efficient OSC (as-prepared condition) with the e-spray method, and post-annealing increased the power conversion efficiency (PCE) slightly to 3.08%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Solution-processed organic solar cells10.1557/mrs2008.138 ↗
2. All solution roll-to-roll processed polymer solar cells free from indium–tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
3. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
6. Fabrication of bulk heterojunction plastic solar cells by screen printing10.1063/1.1413501 ↗
7. Performance analysis of printed bulk heterojunctions solar cells10.1002/adfm.200500581 ↗
8. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
9. Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
10. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
11. Topographical and morphological aspects of spray coated organic photovoltaics10.1016/j.orgel.2009.02.010 ↗
12. Spray-deposited poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) top electrode for organic solar cells10.1063/1.3021022 ↗
13. Fully spray coated organic photodiodes10.1021/nl803386y ↗
14. Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition10.1063/1.2836267 ↗
15. Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method10.1039/c0jm03899g ↗
16. Factors to be considered in bulk heterojunction polymer solar cells fabricated by the spray process10.1109/JSTQE.2010.2042282 ↗
17. Multi-source/component spray coating for polymer solar cells10.1021/nn901758p ↗
18. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
19. Bouncing water drops10.1209/epl/i2000-00547-6 ↗
20. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
21. Controlled electro-spray deposition of highly conductive PEDOT:PSS films10.1016/j.solmat.2011.10.025 ↗
22. High-performance organic solar cells with spray-coated hole-transport and active layers10.1002/adfm.201001562 ↗
23. Efficacy of TiOx optical spacer in bulk-heterojunction solar cells processed with 1,8-octanedithiol10.1063/1.2937844 ↗
24. Solvent mixtures for improving device efficiency of polymer photovoltaic devices
25. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
26. Controlling morphology in polymer-fullerene mixtures10.1002/adma.200701519 ↗
27. Effect of trace solvent on the morphology of P3HT:PCBM bulk heterojunction solar cells10.1002/adfm.201002372 ↗
28. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
29. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene-fullerene bulk heterojunction10.1002/adfm.200400559 ↗
30. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
31. Thin-film fabrication method for organic light-emitting diodes using electrospray deposition10.1002/adma.200900444 ↗
32. Surface morphology of fluorene thin film fabricated by electrospray deposition technique using two organic solvents: application for organic light-emitting diodes10.1016/j.tsf.2011.07.048 ↗
33. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
34. Tuning the dimensions of C60-based needlelike crystals in blended thin films10.1002/adfm.200500812 ↗
35. Vertically segregated polymer-blend photovoltaic thin-film structures through surface-mediated solution processing10.1063/1.1456550 ↗
36. The role of mesoscopic PCBM crystallites in solvent vapor annealed copolymer solar cells10.1021/nn800878c ↗
37. Strong regio-regularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
38. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
39. Direct observation of internal potential distributions in a bulk heterojunction solar cell10.1063/1.3669533 ↗
40. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
41. Composition and annealing effects in polythiophene/fullerene solar cells10.1007/s10853-005-0568-0 ↗
42. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
43. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3d morphology on device performance10.1002/adfm.200902247 ↗