Enhanced stability in semi-transparent PTB7/PC71BM photovoltaic cells
Source abstract
Abstract
We studied the performance over time of opaque and semi-transparent PTB7:PC71BM bulk heterojunction solar cells. For unsealed inverted configuration cells we observe that when the isolation from the environment is improved, the degradation observed is dominated by one single exponential decay. We demonstrate that a dielectric multilayer stack of approximately 550 nm provides an isolation that increases the lifetime of the cell close to ten times. In that event the fill factor appears to be the PV parameter dominating cell degradation resulting from a decrease in the shunt resistance. An Impedance analysis we performed indicates that a Warburg element, attributed to the presence of slowly moving charges such as heavy ions, must be included in the description of the experimental data. The contribution from such element increases as the cell degrades in good agreement with a degradation dominated by the corrosive effects from external agents reaching the active layer of the device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
2. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
3. Betancur · Nat. Photonics · 2013 · 7 · 99510.1038/nphoton.2013.276 ↗
4. Stability of polymer solar cells10.1002/adma.201104187 ↗
5. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
6. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
7. High-efficiency inverted solar cells based on a low bandgap polymer with excellent air stability10.1016/j.solmat.2011.09.042 ↗
8. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
9. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
10. 8.9% Single-stack inverted polymer solar cells with electron-rich polymer nanolayer-modified inorganic electron-collecting buffer layers10.1002/aenm.201301692 ↗
11. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
12. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
13. On the degradation process involving polyfluorenes and the factors governing their spectral stability10.1021/ma2015003 ↗
14. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
15. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
16. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
17. High-performance polymer solar cells using an optically enhanced architecture10.1002/adom.201200027 ↗
18. Polymer bulk heterojunction solar cells: function and utility of inserting a hole transport and electron blocking layer into the device structure10.1002/adma.201004301 ↗
19. Sergeant · Adv. Mater. · 2012 · 24 · 72810.1002/adma.201104273 ↗
20. Optical interference for the matching of the external and internal quantum efficiencies in organic photovoltaic cells10.1016/j.solmat.2012.04.047 ↗
21. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
22. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
23. Enhanced anode performance of microbial fuel cells by adding nanosemicondutor goethite10.1016/j.jpowsour.2012.09.057 ↗
24. Enhanced electrochemical performance of LiMnPO4 by Li+ conductive Li3VO4 surface coatinns10.1016/j.electacta.2014.03.171 ↗
25. Structure and corrosion resistance properties of Ni–Fe–B–Si–Nb amorphous composite coatings fabricated by laser processing10.1016/j.jallcom.2013.06.111 ↗
26. Lopez-Lopez · J. Mater. Chem. · 2012 · 22 · 175110.1039/C1JM15202E ↗