journal article·2011-08

Automatic saw-mark detection in multicrystalline solar wafer images

Wei-Chen Li, Du-Ming Tsai

Publisher page

Abstract

Abstract This paper presents a method of automatic defect inspection for the photovoltaic industry, with a special focus on multicrystalline solar wafers. It presents a machine vision-based scheme to automatically detect saw-mark defects in solar wafer surfaces. A saw-mark defect is a severe flaw that occurs when a silicon ingot is cut into wafers. Early detection of saw-mark defects in the wafer cutting process can reduce material waste and improve production yields. A multicrystalline solar wafer surface presents random shapes, sizes, and orientations of crystal grains in the surface, making the automatic detection of saw-mark defects extremely difficult. The proposed saw-mark detection scheme involves two main procedures: (1) Fourier image reconstruction to remove the multi-grain background of a solar wafer image and (2) a line detection process in the reconstructed image to locate saw-marks. The Fourier transform (FT) is used to eliminate crystal grain patterns and results in a non-textured surface in the reconstructed image. Since a saw-mark is presented horizontally in the sliced wafer, vertical scan lines in the reconstructed image are individually evaluated by a line detection process. A pixel far away from the line sought can then be effectively identified as a defect point. Experimental results show that the proposed method can effectively detect various saw-mark defects, specifically black lines, white lines, and impurities in multicrystalline solar wafers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Industrial Vision Systems and Defect Detection · Image and Object Detection Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Photovoltaic material, past, present, future10.1016/S0927-0248(99)00131-2 ↗
2. T.C. Palathra, Process modeling of a wire saw operation, Ph.D. Thesis, Faculty of the Graduate School of the University of Maryland, College Park, 2008.
3. Saw-damage-induces structural defects on the surface of silicon crystals10.1149/1.1859815 ↗
4. Multicystalline silicon for solar cells10.1016/j.tsf.2005.01.061 ↗
5. Hard inclusions and their detrimental effects on the wire sawing process of multicrystalline silicon10.1016/j.solmat.2007.06.001 ↗
6. Improvement on surface texturing of single crystalline silicon for solar cells by saw-damage etching using an acidic solution10.1016/j.solmat.2009.06.012 ↗
7. Markvart · 2005
8. P. Pauli, J.G. Beesley, U.P. Schönholzer, U. Kerat, Swiss wafer slicing technology for the global PV market from Meyer+Burger AG novel trends for the future in photovoltaic wafer manufacturing, in: Proceedings of 6e Symposium Photovoltaïque National SIG Genève, Lignon, France, 2005.
9. A. Maller, M. Reinecke, A. Bachmann, C. Seifert, T. Trammer, R. Schindler, Towards larger and thinner wafers used in photovoltaic, in: Proceedings of Photovoltaic Specialists Conference, Conference Record of the Thirty-first IEEE, 2005, pp. 1019–1022.10.1109/PVSC.2005.1488306 ↗
10. Z. Fu, Y. Zhao, Y. Liu, Q. Cao, M. Chen, J. Zhang, J. Lee, Solar cell crack inspection by image processing, in: Proceedings of International. Conference on Business of Electronic Product Reliability and Liability, Shanghai, China, 2004, pp. 77–80.
11. M.A. Ordaz, G.B. Lush, Machine vision for solar cell characterization, in: Proceedings of SPIE, San Diego, CA, USA, 2000, pp. 238–248.10.1117/12.380078 ↗
12. M. Pilla, F. Galmiche, X. Maldague, Thermographic inspection of cracked solar cells, in: Proceedings of SPIE, Seattle, WA, USA, 2002, pp. 699–703.10.1117/12.459624 ↗
13. Micro-crack inspection in heterogeneously textured solar wafers using anisotropic diffusion10.1016/j.imavis.2009.08.001 ↗
14. Regularity analysis for patterned texture inspection10.1109/TASE.2008.917140 ↗
15. Performance evaluation for motif-based patterned texture defect detection
16. Defect detection of uneven brightness in low-contrast images using basis image representation10.1016/j.patcog.2009.09.006 ↗
17. Defect detection in periodically patterned surfaces using independent component analysis10.1016/j.patcog.2008.02.011 ↗
18. I. Ar, Y.S. Akgul, A generic system for the classification of marble tiles using Gabor filters, in: Proceedings of International Symposium on Computer and Information Sciences, Istanbul, 2008, pp. 1–6.10.1109/ISCIS.2008.4717915 ↗
19. X. Xie, M. Mirmehdi, Localising surface defects in random color textures using multiscale texem analysis in image eigenchannels, in: Proceedings of IEEE International. Conference on Image Processing, Genoa, Italy, 2005, pp. III–1124–7.10.1109/ICIP.2005.1530594 ↗
20. X. Xie, M. Mirmehdi, Texture exemplars for defect detection on random textures, in: International Conference on Advances in Pattern Recognition, Bath, UK, 2005, pp. 404–413.10.1007/11552499_46 ↗
21. TEXEMS: texture exemplars for defect detection on random textured surfaces10.1109/TPAMI.2007.1038 ↗
22. J.C. Liu, G. Pok, Texture edge detection by feature encoding and predictive model, in: Proceedings of International Conference on Acoustics, Speech, and Signal Processing, Phoenix, Arizona, 1999, pp. 1105–1108.10.1109/ICASSP.1999.759937 ↗
23. V.P.C. Hough, A Method and Means for Recognizing Complex Patterns, U.S. Patent 3069654, 1962.
24. Use of the Hough transformation to detect lines and curves in pictures10.1145/361237.361242 ↗
25. Gonzalez · 1992
26. M. Frigo, S.G. Johnson, FFTW Web Page, 2004. Available online at: 〈http://www.fftw.org〉.
27. The design and implementation of FFTW310.1109/JPROC.2004.840301 ↗