Characterization of electrochemically deposited CuInTe2 thin films for solar cell applications
Source abstract
Abstract
Abstract CuInTe 2 (CIT) thin films have been electrochemically deposited from aqueous electrolyte onto fluorine doped tin oxide (FTO) coated glass substrates. A conventional three-electrode geometry consisting working, counter and reference electrodes was used to perform the electrochemical studies. The deposition potential, −0.75 V with respect to Ag/AgCl was optimized by cyclic voltammetry (CV). The as-deposited as well as annealed films were characterized using range of characterization techniques to study the structural, morphological, compositional and optoelectronic properties. Amorphous CIT films have been deposited for all reported potentials, however after heat treatment the polycrystalline films with (1 1 2), (2 2 0)/(2 0 4) and (3 1 2)/(1 1 6) planes corresponds to tetragonal CIT are observed. After heat treatment the secondary peaks of Indium oxide and Indium telluride with planes (0 1 2), (2 2 2) and (3 1 1) were also observed. Identification of secondary microcrystalline phases and vibration modes of chalcopyrite were studied by using Raman spectroscopy. The most intense line observed in Raman spectra at 123 cm −1 is due to the A 1 mode, which is generally observed in Raman spectra of I–III–VI 2 chalcopyrite structure. Densely packed, adherent and relatively uniform thin films of CIT are deposited for all used growth potentials. The grain size has been improved with heat treatment. Elemental compositional analysis was performed using Energy Dispersive X-ray Analysis (EDAX). Tellurium rich films are deposited for all reported potentials. The final solar cell devices fabricated at optimum deposition potential are tested using solar simulator with 1.5 AM, (100 mW cm −2 ). The cell parameters obtained from J – V characteristics are, V oc =480 mV, J sc =20 mA/cm 2 , FF=43% and η =4.13%. The calculated values of series resistance R s and Ideality factor A under dark and illuminated conditions are 334/27 Ω and 1.43/1.63, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. CIGS-based solar cells prepared from electrodeposited precursor films10.1016/j.solmat.2011.10.026 ↗
2. Electrodeposition of p–i–n type CuInSe2 multilayers for photovoltaic applications10.1016/j.solmat.2003.10.001 ↗
3. Non vacuum methods for formation of Cu(In,Ga)(Se,S)2 thin film photovoltaic absorbers10.1002/pip.914 ↗
4. Electrochemical study of one-step electrodeposition of copper–indium–gallium alloys in acidic conditions as precursor layers for Cu(In,Ga)Se2 thin film solar cells10.1016/j.electacta.2011.05.033 ↗
5. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
6. Growth of CuInTe2 single crystals by iodine transport and their characterization10.1016/j.materresbull.2007.10.004 ↗
7. Growth and characterization of stepwise flash evaporated CuInTe2 thin films10.1016/j.solmat.2008.09.024 ↗
8. Low temperature growth and properties of Cu–In–Te based thin films for narrow bandgap solar cells10.1016/j.tsf.2010.04.065 ↗
9. Photosensitive structures based on CuIn5Te8 single crystals: development and properties10.1134/S106378261105006X ↗
10. Impedance spectra and computation of chemical diffusion coefficients in CuIn3Te5 single crystals with a massive Cu motion10.1088/0022-3727/45/23/235101 ↗
11. Influence of copper to indium atomic ratio on the properties of Cu–In–Te based thin-film solar cells prepared by low-temperature co-evaporation10.1116/1.4736948 ↗
12. Fabrication of CuInTe2 and CuInTe2−xSex ternary gradient quantum dots and their application to solar cells10.1021/nn401274e ↗
13. Solvothermal synthesis and characterization of a CuInTe2 absorber for thin-film photovoltaics10.1016/j.materresbull.2012.08.061 ↗
14. Formation and optical properties of CuInTe2 nanoparticles in silicate matrices10.1134/S1063782607080143 ↗
15. CuInTe2 and In-rich telluride chalcopyrites thin films obtained by electrodeposition techniques10.1016/j.solmat.2006.11.014 ↗
16. Investigation of electronic quality of chemical bath deposited cadmium sulphide layers used in thin film photovoltaic solar cells10.1016/S0040-6090(03)00671-0 ↗
17. Electrodeposited semiconducting CuInSe, films: I. Preparation, structural and electrical characterization10.1088/0022-3727/19/7/019 ↗
18. Micro-Raman spectroscopy studies of bulk and thin films of CuInTe210.1088/0268-1242/24/7/075019 ↗
19. Lattice vibrational, thermal and mechanical properties of CuInSe210.1016/0379-6787(86)90100-6 ↗
20. Raman spectra of CuInTe2, CuIn3Te5 and CuIn5Te8 ternary compounds10.1063/1.1289225 ↗
21. Infrared reflectivity of p-type CuInTe210.1103/PhysRevB.23.6288 ↗
22. Lattice vibrations in AIBIIIC2VI chalcopyrite compounds, Helvetica
23. Interatomic force constant of AIIBIVC2Vand AIBIIIC2VI semiconductors10.1002/(SICI)1521-3951(199903)212:1<37::AID-PSSB37>3.0.CO;2-W ↗
24. Dielectric properties of I–III–VI2-type chalcopyrite semiconductors10.1103/PhysRevB.62.13546 ↗
25. Raman spectra of the chalcopyrite compound CuInTe210.1063/1.369767 ↗
26. Investigation of non-aqueous electrodeposited CdS/Cd1−xZnxTe heterojunction solar cells10.1016/j.solmat.2003.08.011 ↗