journal article·2020-04Open access

Monolithic thin-film chalcogenide–silicon tandem solar cells enabled by a diffusion barrier

Alireza Hajijafarassar, Filipe Martinho, Fredrik Stulen, Sigbjørn Grini, Simón López-Mariño, Moises Espíndola-Rodríguez, Max Döbeli, Stela Canulescu, Eugen Stamate, Mungunshagai Gansukh, Sara Engberg, Andrea Crovetto, Lasse Vines, Jørgen Schou, Ole Hansen

Abstract

Following the recent success of monolithically integrated Perovskite/Si tandem solar cells, great interest has been raised in searching for alternative wide bandgap top-cell materials with prospects of a fully earth-abundant, stable and efficient tandem solar cell. Thin film chalcogenides (TFCs) such as the Cu2ZnSnS4 (CZTS) could be suitable top-cell materials. However, TFCs have the disadvantage that generally at least one high temperature step (>500 C) is needed during the synthesis, which could contaminate the Si bottom cell. Here, we systematically investigate the monolithic integration of CZTS on a Si bottom solar cell. A thermally resilient double-sided Tunnel Oxide Passivated Contact (TOPCon) structure is used as bottom cell. A thin (<25 nm) TiN layer between the top and bottom cells, doubles as diffusion barrier and recombination layer. We show that TiN successfully mitigates in-diffusion of CZTS elements into the c-Si bulk during the high temperature sulfurization process, and find no evidence of electrically active deep Si bulk defects in samples protected by just 10 nm TiN. Post-process minority carrier lifetime in Si exceeded 1.5 ,s. i.e., a promising implied open-circuit voltage (i-Voc) of 715 mV after the high temperature sulfurization. Based on these results, we demonstrate a first proof-of-concept two-terminal CZTS/Si tandem device with an efficiency of 1.1% and a Voc of 900 mV. A general implication of this study is that the growth of complex semiconductors on Si using high temperature steps is technically feasible, and can potentially lead to efficient monolithically integrated two-terminal tandem solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Woodhouse · 2016
2. VDMA · 2018
3. Markus Fischer · 2019
4. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
5. Green · 1982
6. Green · 2014 · 89810L
7. Techno-economic viability of silicon-based tandem photovoltaic modules in the United States10.1038/s41560-018-0201-5 ↗
8. Unravelling the practical solar charging performance limits of redox flow batteries based on a single photon device system10.1039/C9SE00333A ↗
9. Selecting tandem partners for silicon solar cells10.1038/nenergy.2016.137 ↗
10. Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions10.1038/nenergy.2017.144 ↗
11. Solar cell efficiency tables (version 53)10.1002/pip.3102 ↗
12. Sharp Corporation · 2013
13. Evolution of space solar cells10.1016/S0927-0248(00)00341-X ↗
14. Present and future of high efficiency multi-junction solar cells
15. A road towards 25% efficiency and beyond: Perovskite tandem solar cells10.1039/C6ME00041J ↗
16. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
17. 2018
18. 2019
19. Next-generation multijunction solar cells: The promise of II-VI materials10.1063/1.3582902 ↗
20. Electrical analysis of c-Si/CGSe monolithic tandem solar cells by using a cell-selective light absorption scheme10.1038/s41598-017-15998-y ↗
21. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
22. Effect of germanium incorporation on the properties of kesterite Cu2ZnSn(S,Se)4 monograins10.1016/j.tsf.2018.11.020 ↗
23. Wide band-gap tuning Cu2ZnSn1-xGexS4 single crystals: Optical and vibrational properties10.1016/j.solmat.2015.12.021 ↗
24. Wide bandgap Cu2ZnSn1-xGexS4 fabricated on transparent conductive oxide-coated substrates for top-cells of multi-junction solar cells10.1016/j.jallcom.2016.08.039 ↗
25. Crystallographic and optical properties of (Cu,Ag)2ZnSnS4 and (Cu,Ag)2ZnSnSe4 solid solutions
26. Understanding the effects of Cd and Ag doping in Cu2ZnSn(S,Se)4 solar cells10.1021/acs.chemmater.8b00677 ↗
27. Boosting Cu2ZnSn(S,Se)4 solar cells efficiency by a thin Ag intermediate layer between absorber and back contact10.1063/1.4863951 ↗
28. Adachi · 2015 · 21
29. Crystallographic aspects of Cu2ZnSn(S,Se)4 (CZTS)
30. Growth of Cu2ZnSn(S,Se)4 thin films on Si (100) substrates by multisource evaporation10.1016/j.tsf.2008.09.056 ↗
31. Epitaxial growth of kesterite Cu2ZnSn(S,Se)4 on a Si(001) substrate by thermal co-evaporation10.1016/j.tsf.2013.12.046 ↗
32. Epitaxial Cu2ZnSn(S,Se)4 thin film on Si (111) 4∘ substrate10.1063/1.4922992 ↗
33. Monograin materials for solar cells10.1016/j.solmat.2008.04.018 ↗
34. Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polarities10.7567/JJAP.56.08MB15 ↗
35. Feldmann · 2013
36. Laser contact openings for local poly-si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
37. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
38. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
39. >23% high-efficiency tunnel oxide junction bifacial solar cell with electroplated Cu gridlines10.1109/JPHOTOV.2014.2360565 ↗
40. Junction resistivity of Carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
41. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
42. Weber · 2002
43. Electrical properties and recombination activity of copper, nickel and cobalt in silicon10.1007/s003390050649 ↗
44. Physics of copper in silicon10.1149/1.1421348 ↗
45. Electronic states at dislocations and metal silicide precipitates in crystalline silicon and their rrole in solar cell materials10.1007/s00339-008-5027-8 ↗
46. Resistivity, mobility and impurity levels in GaAs, Ge, and Si at 300°K10.1016/0038-1101(68)90012-9 ↗
47. Point defects in silicon after zinc diffusion - a deep level transient spectroscopy and spreading-resistance profiling study10.1088/0268-1242/14/5/011 ↗
48. Diffusion and electrical behavior of zinc in silicon10.1103/PhysRev.105.379 ↗
49. Radiation-induced defects in Ge- and Sn-doped n-type Si
50. Tin-vacancy acceptor levels in electron-irradiated n-type silicon10.1103/PhysRevB.62.4535 ↗
51. The energy levels and the defect signature of sulfur-implanted silicon by thermally stimulated measurements10.1016/0038-1101(78)90293-9 ↗
52. Sulfur point defects in crystalline and amorphous silicon10.1103/PhysRevB.70.205210 ↗
53. Effect of a ZnS intermediate layer on properties of Cu2ZnSn(S,Se)4 films from sputtered Zn/CuSn precursors on Si (100) substrate
54. Ultrathin diffusion barriers/liners for gigascale copper metallization10.1146/annurev.matsci.30.1.363 ↗
55. The evolution of diffusion barriers in copper metallization10.1007/s11837-007-0009-4 ↗
56. Study of alternative back contacts for thin film Cu2ZnSnSe4-based solar cells10.1088/0022-3727/48/3/035103 ↗
57. On the interface between kesterite absorber and mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗
58. Characterization of TiN back contact interlayers with varied thickness for Cu2ZnSn(S,Se)4 thin film solar cells10.1016/j.tsf.2017.08.030 ↗
59. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
60. Effects of back contact instability on Cu2ZnSn(S,Se)4 devices and processes10.1021/cm4015223 ↗
61. Bifacial kesterite solar cells on FTO substrates10.1021/acssuschemeng.7b02797 ↗
62. Carrier-selective p- and n-contacts for efficient and stable photocatalytic water reduction10.1016/j.cattod.2016.11.028 ↗
63. Cadmium free Cu2ZnSn(S,Se)4 solar cells with 9.7% efficiency10.1002/aenm.201900439 ↗
64. Influence of Na on Cu(In,Ga)Se2 solar cells grown on polyimide substrates at low temperature: Impact on the Cu(In,Ga)Se2/Mo interface10.1063/1.3340459 ↗
65. Beyond 8% ultrathin kesterite Cu2ZnSn(S,Se)4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
66. Prediction of the open-circuit voltage of solar cells from the steady-state photoconductance10.1002/(SICI)1099-159X(199703/04)5:2<79::AID-PIP155>3.0.CO;2-J ↗
67. A semiautomatic algorithm for rutherford backscattering analysis10.1016/0168-583X(86)90291-0 ↗
68. Overlapping electron traps in n-type silicon studied by Capacitance transient spectroscopy10.1063/1.344389 ↗
69. Bandlike and localized states at extended defects in silicon10.1103/PhysRevB.52.13726 ↗
70. The development of Cu filling and reliability performance with Ru-Ta alloy barrier for Cu interconnects10.1149/2.0901606jes ↗
71. S-shaped current–voltage characteristics in solar cells: A review
72. Deep-level transient spectroscopy and photoluminescence studies of formation and depth profiles of copper centers in silicon crystals diffused with dilute copper10.1143/JJAP.49.071302 ↗
73. Characterization of titanium nitride films prepared by RF sputtering
74. Titanium nitride films with high oxygen concentration10.1007/BF02652136 ↗
75. Interstitial copper-related center in n-type silicon10.1063/1.120026 ↗
76. Monolithic Si nanocrystal/crystalline Si tandem cells involving Si nanocrystals in SiC10.1002/pip.2766 ↗