journal article·2018-05

RF sputtered CdS films as independent or buffered electron transport layer for efficient planar perovskite solar cell

Yixin Guo, Jinchun Jiang, Shaohua Zuo, Fuwen Shi, Jiahua Tao, Zhigao Hu, Xiaobo Hu, Gujin Hu, Pingxiong Yang, Junhao Chu

Publisher page

Abstract

Abstract Metal sulfide has the potential to take the place of high temperature sintered TiO2 as electron transportation layer for perovskite solar cell (PSC) with improved light stability and suppressed hysteresis. In this work, CdS films were used as independent or buffered electron transport layer for planar perovskite solar cell by a low-temperature RF sputtering method for the first time. The effects of surface roughness and optical absorption of CdS films on the photovoltaic performance of PSCs were discussed. The PSC with sputtered CdS film shows a higher open-circuit voltage (Voc) and efficiency of 13.17% than high temperature sintered TiO2 ETL (12.71%). Moreover, a RF sputtered CdS buffer layer between TiO2 and perovskite could tune the conduction band edge of TiO2 and perovskite and passivating the surface defects. Time resolved photoluminescence results indicate the RF sputtered CdS film buffer layer could accelerate charge transportation and a higher conversion efficiency over 16% has thus been achieved, with enhanced air stability and minimized hysteresis. These findings offer new research directions for low-temperature sputtered metal sulfide film as a promising electron transport material for stable and high efficient planar perovskite solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
3. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
4. MgO nanoparticle modified anode for highly efficient SnO2‐based planar perovskite solar cells10.1002/advs.201700031 ↗
5. Perovskite solar cells based on low-temperature processed indium oxide electron selective layers10.1021/acsami.5b12849 ↗
6. Cerium oxide standing out as an electron transport layer for efficient and stable perovskite solar cells processed at low temperature10.1039/C6TA07541J ↗
7. TiO2–ZnS cascade electron transport layer for efficient formamidinium tin iodide perovskite solar cells10.1021/jacs.6b08790 ↗
8. Novel CdS hole-blocking layer for photostable perovskite solar cells10.1021/acsami.5b12336 ↗
9. Low-temperature processed In2S3 electron transport layer for efficient hybrid perovskite solar cells10.1016/j.nanoen.2017.04.033 ↗
10. CdTe/CdS solar cell junction activation: study using MgCl2 as an environment friendly substitute to traditional CdCl210.1016/j.solmat.2016.11.014 ↗
11. Optimization of post-deposition annealing in Cu2ZnSnS4 thin film solar cells and its impact on device performance10.1016/j.solmat.2017.05.065 ↗
12. CdS and Zn1−xSnxOy buffer layers for CIGS solar cells10.1016/j.solmat.2016.09.023 ↗
13. Growth, characterization and studying of sol–gel derived CdS nanoscrystalline thin films incorporated in polyethyleneglycol: effects of post-heat treatment10.1016/j.solmat.2012.05.014 ↗
14. High efficiency CH3NH3PbI3: CdS perovskite solar cells with CuInS2 as the hole transporting layer10.1016/j.jpowsour.2016.12.027 ↗
15. Effect of substrate and Zn doping on the structural, optical and electrical properties of CdS thin films prepared by CBD method10.1016/j.jallcom.2016.08.298 ↗
16. Boosting efficiency and stability of perovskite solar cells with CdS inserted at TiO2/perovskite interface10.1002/admi.201600729 ↗
17. Effects of Cd diffusion and doping in high-performance perovskite solar cells using CdS as electron transport layer10.1021/acs.jpcc.6b05406 ↗
18. Evolution of oxygenated cadmium sulfide (CdS: O) during high-temperature CdTe solar cell fabrication10.1016/j.solmat.2016.05.038 ↗
19. A sputtered CdS buffer layer for co-electrodeposited Cu2ZnSnS4 solar cells with 6.6% efficiency10.1039/C5CC01170A ↗
20. Reproducible planar heterojunction solar cells based on one-step solution-processed methylammonium lead halide perovskites10.1021/acs.chemmater.6b05159 ↗
21. Effects of film thickness and stoichiometric on the electrical, optical and photodetector properties of CdS quantum dots thin films deposited by chemically bath deposition method at different bath temperature
22. Novel planar heterostructure perovskite solar cells with CdS nanorods array as electron transport layer10.1016/j.solmat.2015.04.015 ↗
23. Influence of the Cu2ZnSnS4 absorber thickness on thin film solar cells10.1002/pssa.201532311 ↗
24. Potential of CuS cap to prevent decomposition of Cu2ZnSnS4 during annealing10.1002/pssa.201532420 ↗
25. Core/shell structured TiO2/CdS electrode to enhance the light stability of perovskite solar cells10.1021/acsami.5b09442 ↗
26. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
27. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
28. Ionic polarization-induced current–voltage hysteresis in CH3NH3PbX3 perovskite solar cells10.1038/ncomms10334 ↗
29. Linking chemistry at the TiO2/CH3NH3PbI3 interface to current–voltage hysteresis10.1021/acs.jpclett.7b00712 ↗
30. It takes two to tango—double-layer selective contacts in perovskite solar cells for improved device performance and reduced hysteresis10.1021/acsami.7b00900 ↗
31. Enhanced short-circuit current density of perovskite solar cells using Zn-doped TiO2 as electron transport layer10.1016/j.solmat.2016.07.003 ↗
32. Solution-processed Nb: SnO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsami.6b13362 ↗
33. p‐Type CuI islands on TiO2 electron transport layer for a highly efficient planar‐perovskite solar cell with negligible hysteresis