journal article·2016-04

Relationship between the electrical properties of the n-oxide and p-Cu 2 O layers and the photovoltaic properties of Cu 2 O-based heterojunction solar cells

Tadatsugu Minami, Toshihiro Miyata, Yuki Nishi

Publisher page

Abstract

Abstract We investigated the relationship between the electrical properties (of the n-oxide semiconductor layer and the p-Cu2O sheet) and the obtainable photovoltaic properties of Al-doped ZnO (AZO)/n-oxide/p-Cu2O heterojunction solar cells that were fabricated using either p-type non-doped Cu2O or Na-doped Cu2O (Cu2O:Na) sheets (prepared by thermally oxidizing a Cu sheet) functioning as the active layer as well as the substrate. We fabricated some heterojunction solar cells using p-Cu2O (non-doped) sheets and n-ZnO thin films with various electron concentrations (N) in the range of 1017―1020 cm−3; non-doped and Al- or Cu-doped ZnO thin films were deposited under various O2 or O3 gas atmosphere pressures using a pulsed laser deposition (PLD) method. The obtained photovoltaic properties exhibited a tendency to increase as N was increased from 1017 to about 3×1019 cm−3; the values remained at these maximum levels as N was increased to about 8×1019 cm−3, and then they decreased as N was increased further. With an N on the order of 1020 cm−3, the reduction of photovoltaic properties was attributed to an increase in the discontinuity of the conduction band at the interface between the n-ZnO and p-Cu2O layers. In addition, we found that the hole concentration (P) in Cu2O:Na sheets (i.e., Cu2O sheets postannealed with various Na compounds) could be controlled in the range of 1014―1019 cm−3 by varying the annealing temperature and duration. As another example, the obtained photovoltaic properties in heterojunction solar cells that were fabricated by depositing n-(Ga0.975Al0.025)2O3 thin films on p-Cu2O:Na sheets by PLD remained constant as P was increased to approximately 1×1016 cm−3, and then they decreased significantly as P was increased further. The reduction of the obtained photovoltaic properties in heterojunction solar cells fabricated using Cu2O:Na sheets with a P above about 1.4×1016 cm−3 was attributed mainly to decreases of both the depletion layer width and the diffusion length.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Explanation for low-efficiency Cu2O Schottky-barrier solar cells10.1063/1.90593 ↗
2. Experimental and theoretical studies of Cu2O solar cells10.1016/0379-6787(82)90050-3 ↗
3. Indium tin oxide/Cu2O photovoltaic cells10.1016/0040-6090(83)90447-9 ↗
4. Enhancement of the photovoltaic conversion efficiency in Cu/Cu2O Schottky barrier solar cells by H+ ion irradiation10.1002/pssa.2210950244 ↗
5. Cu2O solar cells: a review10.1016/0379-6787(88)90065-8 ↗
6. A study of electrodeposited cuprous oxide photovoltaic cells10.1016/0927-0248(92)90097-9 ↗
7. High-efficiency oxide heterojunction solar cells using Cu2O sheets10.1143/JJAP.43.L917 ↗
8. Effect of ZnO film deposition methods on the photovoltaic properties of ZnO–Cu2O heterojunction devices10.1016/j.tsf.2005.07.167 ↗
9. Heterojunction solar cell with 2% efficiency based on a Cu2O substrate10.1063/1.2194315 ↗
10. High-efficiency oxide solar cells with ZnO/Cu2O heterojunction fabricated on thermally oxidized Cu2O sheets10.1143/APEX.4.062301 ↗
11. High-efficiency Cu2O-based heterojunction solar cells fabricated using a Ga2O3 thin film as n-type layer10.7567/APEX.6.044101 ↗
12. Ultrathin amorphous zinc–tin-oxide buffer layer for enhancing heterojunction interface quality in metal-oxide solar cells10.1039/c3ee24461j ↗
13. Electrical and optical properties of TCO–Cu2O heterojunction devices10.1016/j.tsf.2004.06.180 ↗
14. Effect of a buffer layer on the photovoltaic properties of AZO/Cu2O solar cells
15. Photovoltaic properties in Al-doped ZnO/non-doped Zn1−XMgXO/Cu2O heterojunction solar cells10.1149/05051.0059ecst ↗
16. Efficiency improvement of Cu2O-based heterojunction solar cells fabricated using thermally oxidized copper sheets10.1016/j.tsf.2013.11.026 ↗
17. Improved Cu2O-based solar cells using atomic layer deposition to control the Cu oxidation state at the p–n junction10.1002/aenm.201301916 ↗
18. Atomic layer deposited gallium oxide buffer layer enables 1.2V open-circuit voltage in cuprous oxide solar cells10.1002/adma.201401054 ↗
19. Cu2O-based heterojunction solar cells with an Al-doped ZnO/oxide semiconductor/thermally oxidized Cu2O sheet structure10.1016/j.solener.2014.03.036 ↗
20. Fabrication of ZnO/Cu2O heterojunctions in atmospheric conditions: improved interface quality and solar cell performance10.1016/j.solmat.2014.09.018 ↗
21. Perspective: maintaining surface-phase purity is key to efficient open air fabricated cuprous oxide solar cells10.1063/1.4913442 ↗
22. Heterojunction solar cell with 6% efficiency based on an n-type aluminum–gallium-oxide thin film and p-type sodium-doped Cu2O sheet10.7567/APEX.8.022301 ↗
23. Impact of incorporating sodium into polycrystalline p-type Cu2O for heterojunction solar cell applications10.1063/1.4902879 ↗
24. Additives and salts for dye-sensitized solar cells electrolytes: what is the best choice?10.1016/j.jpowsour.2014.04.088 ↗
25. Photochemically produced quasi-linear copolymers for stable and efficient electrolytes in dye-sensitized solar cells10.1016/j.jphotochem.2014.05.018 ↗
26. Effects of post-annealing on (110) Cu2O epitaxial films and origin of low mobility in Cu2O thin-film transistor10.1002/pssa.200881795 ↗
27. Intrinsic defects and metastability effects in Cu2O10.1016/j.tsf.2008.11.054 ↗
28. Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering10.1063/1.3589810 ↗
29. Seeger · 1985 · 173