journal article·2014-06

Invisible Ag grid embedded with ITO nanoparticle layer as a transparent hybrid electrode

Jin-A Jeong, Han-Ki Kim, Jihoon Kim

Publisher page

Abstract

Abstract Ag grid and indium tin oxide (ITO) nanoparticles were assembled by electrohydrodynamic (EHD) jet-printing and brush-painting to realize high-quality printable, transparent conductive electrodes. Effective embedment of an EHD jet-printed Ag grid with a line width of 7.5 μm in brush-painted ITO nanoparticles led to an invisible Ag grid/ITO hybrid electrode with a resistivity of 4.20×10 −5 Ω-cm and an optical transmittance of 83.72% at the optimized Ag grid pitch of 300 μm. Increased carrier concentration supplied by the EHD jet-printed Ag grid reduced the resistivity of Ag grid/ITO hybrid electrodes compared to that of metallic electrodes. The good match between calculated and measured figure of merit values based on the filling factor ( f F ) indicated that embedment of an EHD jet-printed Ag grid in brush-painted ITO nanoparticle is an effective approach to obtain high quality printable transparent electrodes for use in all-printable optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · ZnO doping and properties · Gold and Silver Nanoparticles Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
2. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
3. Efficient polymer solar cells fabricated by simple brush painting10.1002/adma.200702040 ↗
4. Inkjet printing of light emitting quantum dots10.1063/1.3085771 ↗
5. Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas10.1557/jmr.2013.73 ↗
6. A high selective disposable biosensor based on screen-printed technique with two working electrodes for eliminating interference signals10.1016/j.snb.2013.04.039 ↗
7. Development of ultrafine indium tin oxide (ITO) nanoparticle for ink-jet printing by low-temperature synthetic method10.1109/TNANO.2008.917846 ↗
8. Successive solvent-treated PEDOT:PSS electrodes for flexible ITO-free organic photovoltaics10.1016/j.solmat.2013.02.031 ↗
9. Mechanical integrity of flexible Ag nanowire network electrodes coated on colorless PI substrates for flexible organic solar cells10.1016/j.solmat.2012.05.036 ↗
10. Electrode grids for ITO free organic photovoltaic devices10.1002/adma.200602561 ↗
11. Carbon nanotube sheets as electrodes in organic light-emitting diodes10.1063/1.2199461 ↗
12. Efficient inkjet printing of graphene10.1002/adma.201300361 ↗
13. Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils10.1016/j.tsf.2007.05.086 ↗
14. Ink-jet printed transparent electrode using nano-size indium tin oxide particles for organic photovoltaics10.1016/j.solmat.2010.05.052 ↗
15. Characteristics of inkjet-printed nano indium tin oxide particles for transparent conducting electrodes10.1016/j.cap.2010.06.009 ↗
16. Ag grid/ITO hybrid transparent electrodes prepared by inkjet printing10.1016/j.solmat.2011.02.016 ↗
17. Inkjet-printing of indium tin oxide (ITO) films for transparent conducting electrodes10.1016/j.mseb.2011.05.053 ↗
18. Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing10.1088/0022-3727/46/15/155103 ↗
19. Non-contact printing of high aspect ratio Ag electrodes for polycrystalline silicone solar cell with electrohydrodynamic jet printing10.1063/1.4798332 ↗
20. Brush painting of transparent PEDOT/Ag nanowire/PEDOT multilayer electrodes for flexible organic solar cells10.1016/j.solmat.2013.02.020 ↗
21. Simple brush-painting of flexible and transparent Ag nanowire network electrodes as an alternative ITO anode for cost-efficient flexible organic solar cells10.1016/j.solmat.2012.07.012 ↗
22. Electrical properties and defect model of tin-doped indium oxide layers10.1007/BF00619080 ↗
23. Effect of Ag thickness on electrical transport and optical properties of indium tin oxide–Ag–indium tin oxide multilayers10.1063/1.3153977 ↗
24. Colloidal indium tin oxide nanoparticles for transparent and conductive films10.1016/j.tsf.2006.07.022 ↗
25. New figure of merit for transparent conductors10.1063/1.323240 ↗
26. High figure-of-merit ultrathin metal transparent electrodes incorporating a conductive grid10.1063/1.3299259 ↗