journal article·2015-10Open access

Predicting thermal stability of organic solar cells through an easy and fast capacitance measurement

Marta Tessarolo, Antonio Guerrero, Desta Gedefaw, Margherita Bolognesi, Mario Prosa, Xiaofeng Xu, Mahdi Mansour, Ergang Wang, Mirko Seri, Mats R. Andersson, Michele Muccini, Germà Garcia-Belmonte

Abstract

Degradation of organic photovoltaic (OPV) devices is currently a topic under intense research as it is one of the main limitations towards the commercialization of this technology. Morphological changes at both active layer and interfaces with the outer contacts are believed to determine main key issues to be overcome. In-line techniques are essential to rule out any effect arising during sample fabrication. Unfortunately, the number of physical techniques able to provide morphological information on complete and operational devices is certainly limited. In this work, we study the thermal degradation of bulk heterojunction (BHJ) solar cells composed by different donor polymers with techniques developed to provide in-situ information on operational devices. Capacitance measurement as a function of temperature monitors the electrical integrity of the active layer and provides the threshold temperature (TMAX) at which the whole device becomes thermally unstable. We found a direct correlation between the threshold temperature TMAX, obtained by capacitanceerature measurements on complete OPV devices, and the power conversion efficiency decay measured at 85°C. Devices tend to be thermally stable when the temperature of the thermal stress is below TMAX, while above TMAX evident changes in the active layer or at the active layer/electrode interface are also detected by confocal fluorescence microscopy. The capacitance method gives precious guidelines to predict the thermal stability of BHJ solar cells using an accelerated and easy test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers10.1039/c2ee21608f ↗
3. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
4. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
5. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications10.1002/adma.201203827 ↗
6. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
7. Fine structural tuning of cyanated dithieno[3,2-b:2′,3′-d]silole–oligothiophene copolymers: synthesis, characterization, and photovoltaic response10.1021/ma4011186 ↗
8. Influence of incorporating different electron-rich thiophene-based units on the photovoltaic properties of isoindigo-based conjugated polymers: an experimental and dft study10.1021/ma401691r ↗
9. Structural tuning of quinoxaline-benzodithiophene copolymers via alkyl side chain manipulation: synthesis, characterization and photovoltaic properties10.1039/c4ta01479k ↗
10. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
11. Controlling the morphology and performance of bulk heterojunctions in solar cells. Lessons learned from the benchmark poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester system10.1021/cr300005u ↗
12. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
13. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
14. Enhanced efficiency of single and tandem organic solar cells incorporating a diketopyrrolopyrrole-based low-bandgap polymer by utilizing combined ZnO/polyelectrolyte electron-transport layers10.1002/adma.201301288 ↗
15. Efficiency enhancement of P3HT:PCBM solar cells containing scattering Zn–Al hydrotalcite nanoparticles in the PEDOT:PSS layer10.2478/oph-2013-0001 ↗
16. Bithiophene imide and benzodithiophene copolymers for efficient inverted polymer solar cells10.1002/adma.201103948 ↗
17. Self-propagating molecular assemblies as interlayers for efficient inverted bulk-heterojunction solar cells10.1021/ja104695p ↗
18. Integration of a silk fibroin based film as a luminescent down-shifting layer in ITO-free organic solar cells10.1039/C4RA08390C ↗
19. Flat optics with designer metasurfaces10.1038/nmat3839 ↗
20. Layer-by-layer nanoarchitectonics: invention, innovation, and evolution10.1246/cl.130987 ↗
21. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
22. The mechanism of burn-in loss in a high efficiency polymer solar cell10.1002/adma.201103010 ↗
23. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
24. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
25. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
26. Oxygen doping-induced photogeneration loss in P3HT:PCBM solar cells10.1016/j.solmat.2012.01.012 ↗
27. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
28. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
29. Modeling the temperature induced degradation kinetics of the short circuit current in organic bulk heterojunction solar cells10.1063/1.3391669 ↗
30. Real time investigation of the interface between a P3HT:PCBM layer and an al electrode during thermal annealing10.1002/marc.200900224 ↗
31. The photo-stability of polymer solar cells: contact photo-degradation and the benefits of interfacial layers10.1002/adfm.201202567 ↗
32. Thermal stability of poly[2-methoxy-5-(20-phenylethoxy)-1,4-phenylenevinylene] (MPE-PPV): fullerene bulk heterojunction solar cells10.1021/ma201911a ↗
33. Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2006.10.008 ↗
34. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
35. Electron barrier formation at the organic-back contact interface is the first step in thermal degradation of polymer solar cells10.1002/adfm.201304166 ↗
36. Nanoscale mapping by electron energy-loss spectroscopy reveals evolution of organic solar cell contact selectivity10.1016/j.orgel.2014.11.007 ↗
37. Toward bulk heterojunction polymer solar cells with thermally stable active layer morphology10.1117/1.JPE.4.040997 ↗
38. Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends10.1002/adfm.201102510 ↗
39. Polymer defect states modulate open-circuit voltage in bulk-heterojunction solar cells10.1063/1.4841475 ↗
40. Shelf life degradation of bulk heterojunction solar cells: intrinsic evolution of charge transfer complex10.1002/aenm.201401997 ↗
41. A calorimetric study of the phase transitions in poly(3-hexylthiophene)10.1016/0032-3861(95)95298-F ↗
42. Evolution of structure, optoelectronic properties, and device performance of polythiophene:fullerene solar cells during thermal annealing10.1002/adfm.201002300 ↗
43. Derivation of accurate glass transition temperatures by differential scanning calorimetry10.1016/0032-3861(75)90194-9 ↗
44. Influence of chain stiffness on thermal and mechanical properties of polymer thin films10.1021/ma201482b ↗
45. Competition between substrate-mediated π–π stacking and surface-mediated T(g) depression in ultrathin conjugated polymer films10.1140/epje/i2012-12129-3 ↗
46. Influence of backbone rigidity on nanoscale confinement effects in model glass-forming polymers10.1021/ma400210w ↗
47. Deviations of the glass transition temperature in amorphous conjugated polymer thin films10.1103/PhysRevE.88.022601 ↗
48. Effect of spatial confinement on the morphology evolution of thin poly(p-phenylenevinylene)/methanofullerene composite films10.1021/ma047589x ↗
49. 2D π-conjugated benzo[1,2-b:4,5-b′]dithiophene- and quinoxaline-based copolymers for photovoltaic applications10.1039/c3ra44238a ↗
50. How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells10.1021/nn300486a ↗
51. Fluorine substituted conjugated polymer of medium bandwidth yield 7% efficiency in polymer-fullerine solar cells10.1021/ja1112595 ↗
52. Enhanced intrinsic stability of the bulk heterojunction active layer blend of polymer solar cells by varying the polymer side chain pattern10.1016/j.orgel.2013.12.006 ↗
53. Improved thermal stability of bulk heterojunctions based on side-chain functionalized poly(3-alkylthiophene) copolymers and PCBM10.1016/j.solmat.2012.12.007 ↗
54. Enhanced intrinsic stability of the bulk heterojunction active layer blend of polymer solar cells by varying the polymer side chain pattern10.1016/j.orgel.2013.12.006 ↗
55. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
56. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
57. Dramatic enhancement of fullerene anion formation in polymer solar cells by thermal annealing: direct observation by electron spin resonance10.1063/1.4883858 ↗
58. Structural factors that affect the performance of organic bulk heterojunction solar cells10.1021/ma400924b ↗
59. Real-time in-situ observation of morphological changes in organic bulk-heterojunction solar cells by means of capacitance measurements10.1063/1.3549727 ↗
60. Delocalization and dielectric screening of charge transfer states in organic photovoltaic cells10.1038/ncomms4245 ↗
61. rationalizing phase transitions with thermal annealing temperatures for P3HT:PCBM organic photovoltaic devices10.1021/ma202063k ↗
62. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗