journal article·2018-10

Dual-step thermal engineering technique: A new approach for fabrication of efficient CH3NH3PbI3-based perovskite solar cell in open air condition

Sk Abdul Moyez, Subhasis Roy

Publisher page

Abstract

Abstract Fabrication of most-promising CH3NH3PbI3 based perovskite solar cell in ambient condition is excessively essential to industrialize this revolutionary development. In this research work, an efficient, facile and economical technique has been developed to fabricate CH3NH3PbI3 perovskite solar cell in ambient condition which is termed as dual-step thermal engineering technique. In this dual-step thermal engineering technique, the perovskite precursor solution has been spin coated over a mildly hot substrate which was heated at 60 ⁰C for 10 min and followed by annealing at 80 °C for 30 min immediately after spin coating and compared with the perovskite film fabricated by conventional annealing in which the film was heated once at 120 °C for 60 min after spin coating. The comparative study shows that the newly developed dual-step thermal engineering technique is highly efficient and forms smooth, dense, well-crystallize, almost pinhole free perovskite solar cell at open air condition and exhibit remarkable enhanced efficiency over conventional annealing. This is because the precursor solution spontaneously started to develop a perovskite layer over the substrate during spin coating similarly as epitaxial-growth by utilizing the kinetic energy of the hot substrate and it serves as foundation layer for the high quality device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Experimental investigation of photocatalytic and photovoltaic activity of titania/rice husk crystalline nano-silica hybrid composite10.1016/j.solmat.2017.07.021 ↗
2. Defective BiFeO3 with surface oxygen vacancies: facile synthesis and mechanism insight into photocatalytic performance10.1016/j.solmat.2017.06.021 ↗
3. Controlled nucleation assisted restricted volume solvent annealing for stable perovskite solar cells10.1016/j.solmat.2017.03.032 ↗
4. Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications10.1016/j.solmat.2016.11.024 ↗
5. Temperature induced structural, electrical and optical changes insolution processed perovskite material: application in photovoltaics10.1016/j.solmat.2014.10.017 ↗
6. Enhancement of photovoltaic performance of perovskite solar cells by modification of the interface between the perovskite and mesoporous TiO2 film10.1016/j.solmat.2016.05.004 ↗
7. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
8. A review of the multiple exciton generation in photovoltaics10.1166/rase.2016.1108 ↗
9. Enhanced charge carrier generation by dielectric nanomaterials for quantum dots solar cells based on CdS-TiO2 photoanode10.1016/j.solener.2017.09.038 ↗
10. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
11. Molecular ferroelectric contributions to anomalous hysteresis in hybrid perovskite solar cells10.1063/1.4890246 ↗
12. Magnetic field effects in hybrid perovskite devices10.1038/nphys3277 ↗
13. Magneto-optical studies on spin-dependent charge recombination and dissociation in perovskite solar cells10.1002/adma.201405946 ↗
14. Structural, optical and electrical properties of planar mixed perovskite halides/Al-doped Zinc oxide solar cells10.1016/j.solmat.2015.09.063 ↗
15. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
16. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells10.1038/nnano.2014.181 ↗
17. S.A. Moyez, S. Roy, Tailoring the surface morphology with annealing temperature of the lead free perovskite solar cell, CH3NH3SnCl3 and its relation to the cell performance, Materials Today: Proceedings 4 pp. 12657–12660 2017.10.1016/j.matpr.2017.10.078 ↗
18. Fabrication of environmental friendly perovskite solar cell by partial replacement of lead with tin10.5958/2454-7611.2017.00008.X ↗
19. Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells10.1039/C5TA00477B ↗
20. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
21. Thermal engineering of lead-free nanostructured CH3NH3SnCl3 perovskite material for thin-film solar cell
22. Using an airbrush pen for layer-by-layer growth of continuous perovskite thin films for hybrid solar cells10.1021/am506886d ↗
23. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
24. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
25. High‐performance perovskite–graphene hybrid photodetector10.1002/adma.201402271 ↗
26. Applications of phosphorene and black phosphorus in energy conversion and storage devices10.1002/aenm.201702093 ↗
27. Boosting the photoluminescence of monolayer MoS2 on high‐density nanodimer arrays with sub‐10 nm gap10.1002/adom.201700984 ↗
28. Synthesis of hydrophobic carbon nanotubes/reduced graphene oxide composite films by flash light irradiation
29. Facile graphitization of silicon nano-particles with ethanol based chemical vapor deposition10.1016/j.nanoso.2018.04.001 ↗
30. Three-dimensional nanostructured graphene: synthesis and energy, environmental and biomedical applications10.1016/j.synthmet.2017.10.014 ↗
31. Achieving ultrafast hole transfer at the monolayer MoS2 and CH3NH3PbI3 perovskite interface by defect engineering10.1021/acsnano.6b02845 ↗
32. van der Waals heterojunction devices based on organohalide perovskites and two-dimensional materials10.1021/acs.nanolett.5b03944 ↗
33. Effect of Na on lower open circuit voltage of flexible CIGS thin-film solar cells prepared by the low-temperature process10.1088/0031-8949/85/05/055806 ↗
34. Preparation and characteristics of MoSe2 interlayer in bifacial Cu(In,Ga)Se2 solar cells10.1016/j.phpro.2012.03.571 ↗
35. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
36. Solution-processed inorganic copper(I) thiocyanate (CuSCN) hole transporting layers for efficient p–i–n perovskite solar cells10.1039/C5TA04028K ↗
37. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
38. Annealing effects on high-performance CH3NH3PbI3 perovskite solar cells prepared by solution-process10.1016/j.solener.2015.10.019 ↗
39. Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour10.1038/nenergy.2016.195 ↗
40. Thin-film transformation of NH4PbI3 to CH3NH3PbI3 perovskite: a methylamine-induced conversion-healing process10.1002/anie.201609529 ↗
41. 6.5% efficient perovskite quantum-dot-sensitized solar cell10.1039/c1nr10867k ↗
42. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
43. Enhancing efficiency of perovskite solar cell via surface microstructuring: superior grain growth and light harvesting effect10.1016/j.solener.2014.11.016 ↗
44. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
45. The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids10.1103/PhysRev.92.1324 ↗
46. Theory of the Urbach rule10.1103/PhysRev.144.582 ↗
47. Effects of substrate temperature on the structural and electrical properties of Cu(In,Ga)Se2 thin films10.1016/j.solmat.2008.09.002 ↗