journal article·2015-12

Lifetime of organic photovoltaics: Linking outdoor and indoor tests

Michael Corazza, Frederik C. Krebs, Suren A. Gevorgyan

Publisher page

Abstract

Abstract A comprehensive outdoor study of polymer solar cells and modules for duration of one year was conducted. Different sample geometries and encapsulations were employed in order to study the spread in the lifetimes. The study is a complimentary report to previous work that focused on indoor ageing tests. Comparison of the indoor and outdoor lifetimes was performed by means of the o-diagram, which constitutes the initial steps towards establishing a method for predicting the lifetime of an organic photovoltaic device under real operational conditions based on a selection of accelerated indoor tests. Acceleration factors were determined using the ISOS-protocols, which enabled reproducible data acquisition between different laboratories and operators within the OPV community. A semi-automatic filtering method was employed for processing data acquired in outdoor tests. It was found that the lifetime of the samples tested under outdoor conditions was somewhere between the lifetimes of samples measured in accelerated indoor test conditions of damp heat and light soaking (ISOS-D-3 and ISOS-L-2) and in moderate indoor test conditions (shelf life and high temperature storage). The presented results reveal that while the accelerated ageing studies reveal days and weeks of lifetime for the studied samples, in outdoor real operational conditions the samples demonstrate stability up to months and seasons.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. www.nrel.gov, Efficiency chart, 2012. 〈http://www.nrel.gov/ncpv/images/efficiency_chart.jpg〉(accessed 6.02.15).
2. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
3. Photovoltaics energy: improved modeling and analysis of the levelized cost of energy (LCOE) and grid parity – Egypt case study10.1016/j.seta.2014.11.003 ↗
4. Levelised cost of electricity for organic photovoltaics10.1016/j.solmat.2014.10.043 ↗
5. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
6. Outdoor operational stability of indium-free flexible polymer solar modules over 1 year studied in India, Holland, and Denmark10.1002/adem.201400002 ↗
7. Accelerated weathering testing principles to estimate the service life of organic PV modules10.1016/j.solmat.2010.08.033 ↗
8. Accelerated lifetime measurements of P3HT:PCBM solar cells10.1016/j.synthmet.2005.06.016 ↗
9. Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements10.1007/s00339-003-2499-4 ↗
10. An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors10.1016/j.solmat.2011.02.013 ↗
11. Concentrated sunlight for accelerated stability testing of organic photovoltaic materials: towards decoupling light intensity and temperature10.1016/j.solmat.2014.11.033 ↗
12. Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes10.1039/C4EE02582B ↗
13. Outdoor performance of organic photovoltaics: diurnal analysis, dependence on temperature, irradiance, and degradation10.1063/1.4906915 ↗
14. Round robin performance testing of organic photovoltaic devices10.1016/j.renene.2013.09.034 ↗
15. Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: testing the ISOS tests10.1016/j.polymdegradstab.2014.07.013 ↗
16. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
17. Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: stability over 10,000h10.1016/j.solmat.2013.04.024 ↗
18. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
19. Predicting, categorizing and intercomparing the lifetime of OPVs for different ageing tests10.1016/j.solmat.2014.06.031 ↗
20. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
21. A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating10.1016/j.solmat.2012.09.008 ↗
22. The critical choice of PEDOT:PSS additives for long term stability of roll-to-roll processed OPVs10.1002/aenm.201401912 ↗
23. Photovoltaic analysis of the effects of PEDOT:PSS-additives hole selective contacts on the efficiency and lifetime performance of inverted organic solar cells10.1016/j.solmat.2014.10.004 ↗
24. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗